PDA

View Full Version : Diagnostic plug Renault Traifc 05/2008



jeff114
26th August, 2010, 04:14 PM
Hello every body,
I tryed to mount a speed regulator (Waeco MS-902) on my Renault trafic 05/2008, I think I made a mistake...
Now I have the "serv" + "heating" + "engine" lights up.
I think I confused PIN 1 in diagnostic plug with the PIN 11.
Could someone say me what is the pin 11 for? Or if you have an electrical draw of this plug it will be very cool.

Everything work fine even if the lights are on.
I remove the regulator.


Thank you very much!

Jeff

bo0st
27th August, 2010, 01:37 AM
renault VISU schematic. diagnostic connector is part no.225. are you sure with pin 11?

jeff114
27th August, 2010, 08:16 AM
Hello boOst
Thank you for this wiring diagram.
Yes I'm shure it's pin 11 and the wire's color is gold / red.

Thank you again.

jeff

jeff114
27th August, 2010, 11:02 PM
Hello,
I saw lot of diagnostic plug wiring diagrams from Renault. And I am not so sure now... Maybe it was the pin number 12. It seem to be a multimedia can bus.
Does anybody who have a photo of this plug to see the wires color?


Jeff

jeff114
9th September, 2010, 03:30 PM
Hello everybody,
does anybody who have electric diagram of this diagnostic socket for Renault Trafic May 2008?

Thank you very much.

jeff

paro44
10th September, 2010, 06:17 PM
Hello everybody,
does anybody who have electric diagram of this diagnostic socket for Renault Trafic May 2008?

Thank you very much.

jeff

Here's no wiring diagram but the pinout for renault obd plug (Renault OBD II diagnostic connector pinout and wiring @ pinoutsguide.com (http://pinoutsguide.com/CarElectronics/renault_obd2_diag_pinout.shtml)). Maybe it helps.

Pin 1, 11 or 12 seems not to be used/connected by renault? Or it is at least not documented what they are used for since they are manufacturer specific.

jeff114
10th September, 2010, 10:16 PM
Thank you Paro44.
I am very confuse with this wire because I have many doubts on it's position (11, 12 and now 10)... I didn't unplug this wire!
What is sure is that there is only 3 wires between pin 9 and pin 16 (one on 16, one on 14 and the other one...).

jeff