View Full Version : tool change km bmw e60, e90
ION CRISTI
27th August, 2010, 09:19 PM
hello. i need advice from you. i want to know what tool i recommend to change km bmw e60, e90. i have tacho universal 2008 but i'm afraid use from change km cass. thanks
vageric
27th August, 2010, 09:24 PM
you can use tacho universal to change dash.
for cas i use rosfar programmer.
z786
27th August, 2010, 10:30 PM
likewise
i think the earlier cas is possible via diga (never tried it)
but for newer CAS you need R260 programmer
exe123
27th August, 2010, 10:57 PM
on cas1 it is possible. not sure about cas2.
was always working fine with diga but you need to make the CAS-Cable
ION CRISTI
28th August, 2010, 10:26 PM
what price is the programmer rosfar
tachonow
28th August, 2010, 10:30 PM
Search ecutool site for CAS3 programmer. My advice is red case.
z786
28th August, 2010, 10:34 PM
red case works like original 100%
obdmaster
28th August, 2010, 11:00 PM
so does this:
CAS3/912X/9S12X IN CIRCUIT PROGRAMMER_Odometer Correction_Odometer Correction_Auto ECU Tools_sinosells.com, online shopping from China (http://www.sinosells.com/goods.php?id=708)
work like this with these instructions:
http://www.edilock-bg.com/en/R260S_Manual_v1.5.pdf
can someone upload software so i can take a look.
z786
28th August, 2010, 11:40 PM
yes mate, tested 100%
even uses the original software!
check adams post #32 for software
http://www.digital-kaos.co.uk/forums/f174/better-tool-than-tacho-universal-digimaster-102359/index3.html
pinky1970
29th August, 2010, 08:40 AM
How do you find out what CAS is in the motor, how do you find that out. Am i right in thinking that Tacho uni, only does cas 1.
vageric
29th August, 2010, 09:14 AM
How do you find out what CAS is in the motor: on sticker on cas.
Am i right in thinking that Tacho uni, only does cas 1.: I thought cas 1 & 2.
ION CRISTI
12th September, 2010, 08:26 PM
Where can i buy rosfar interface r260s.
vrsc
12th September, 2010, 10:08 PM
Rosfar company no longer exists, but on ebay there are Clone for ca. 250,- EUR.
treo
13th September, 2010, 08:51 PM
Hi
For cas2 I use Tacho Universal with succes.
gizmo666
13th September, 2010, 09:19 PM
on cas1 it is possible. not sure about cas2.
was always working fine with diga but you need to make the CAS-Cable
do you have schematics for cable?
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.