MVCI for TOYOTA TIS, HONDA HDS, VOLVO DIDA

[dego1500]

Anyone bought/used this tool before with these software ?

link: China ECU Tools Centre (http://www.cnecutool.com/productshow.asp?id=2778&sortsid=&sorts=)

I am thinking of getting one. Looks good for the price, especially if all functions supported on all softwares.

Does anyone have any experience with these softwares/interface ?

Thanks.

[cklair]

i think it is copy of "allscanner" dont aste you money it is gone be hit and miss like allscanner "not recommended"

[zimbali7840]

Anyone bought/used this tool before with these software ?

link: China ECU Tools Centre (http://www.cnecutool.com/productshow.asp?id=2778&sortsid=&sorts=)

I am thinking of getting one. Looks good for the price, especially if all functions supported on all softwares.

Does anyone have any experience with these softwares/interface ?

Thanks.

Not recommended buddy. Most of these guys only work on Toyota pretty well (as the infrastructure of the tool is fully J2534 compliant), but have issues here and there with other models.

[dego1500]

Cheers for the info guys, seems its not as good as it seems.

however, I am not totally put off yet, as no one who has actually used this setup has come forward with their opinion.

I would be happy if it does all functions toyota, and programming functions for honda and volvo.

someone please share some more knowledge on this...

[smallboss]

i use allscanner now!
it so beautful!so easy control!i just use for toyota and honda!
i think allscanner will better!

[Dmitry 42]

I hear that MVCI can work with Ford Mazda IDS ? Does any body have this advice ?

[BestGear]

Hi

I have been looking at this interface too, but it appears on VIDA (Volvo) the interface support basic vehicle identification and software download only... so no diagnostics other than standard OBD with other software - no dealer level stuff with VIDA....so worth checking that Toyota and Honda are not similarily limited.

David

[CNOBD2]

Hi,
M-vci
is compatible with Toyota group vehicles like Toyota, Lexus, and
Scion over the J1962 DLC3 diagnostic connector.. Origian MVCI
Supports Diagnostics, Reprogramming, Active tests, and key
programming . But Chinese clone can not do programming work.

Remember it only can support Toyota Group vehicles. No way on Volvo, and others.


Anyone bought/used this tool before with these software ?

link: China ECU Tools Centre (http://www.cnecutool.com/productshow.asp?id=2778&sortsid=&sorts=)

I am thinking of getting one. Looks good for the price, especially if all functions supported on all softwares.

Does anyone have any experience with these softwares/interface ?

Thanks.

[realplayer]

Hi,
M-vci
is compatible with Toyota group vehicles like Toyota, Lexus, and
Scion over the J1962 DLC3 diagnostic connector.. Origian MVCI
Supports Diagnostics, Reprogramming, Active tests, and key
programming . But Chinese clone can not do programming work.

Remember it only can support Toyota Group vehicles. No way on Volvo, and others.


Do you know the address for the original factory

[mecadriano]

I bought this one in China to receive it and I am oh yes I can post some s experience,

[Dmitry 42]

Will waiting!

[boutrosjoseph]

guys,
MVCI for Toyota Tis, Honda and Volvo Vida.
it all depend about the quality of interface.... VCX.... MVCI...

chineese duplicate are most of the time waist of money, if it works it stops soon enough.
my self i have tried AVDI and i am happy withit
:rock:

[wintesla[SR]]

If somone need hep with instaling AVDI to work with Toyota, Honda Volvo and MB das (CAN) i m here.

[Klmauto]

Anybody has experience with MVCI ? What is a big difference between MVCI & Allscanner ?

[mecadriano]

friends, bought a mvci in china, but she can not communicate with the software, tried both, honda, and tis techstream, anyone have any idea how to do, communication

[Dmitry 42]

China configuration tool see MVCI ?

May be MVCI broken ?

In teachstream see setting for choose wich device will work

[mecadriano]

Which way for configuration, interface, because no thought,

[mecadriano]

thanks for the tip friend, I sought and found the error to work ok for this diagnostic system

[bolip]

Hi. Have anybody firmware 1.4.3 or more for MVCI?:boring:

[Ne0]

1.4.5 MVCI Firmware and drivers for Toyota Techstream, HONDA HDS, VOLVO VIDA.

http://rapidshare.com/files/423734500/MVCI_Driver_1.4.5.rar

This file NOT CONTAIN any copyrighted software - only firmware update and drivers

Regards,
Ne0

[bolip]

Thank you. This file have only drivers 1.4.5 and pdf file, firmware no.
Necessary file *.mfu

[HSN]

have anybody tested the MVCI on Volvo Cars??

[marsian]

Allscanner works ok on Toyota,but on volvo,it has lots of problems.Not working on s40 below 2004 and not working on newer diesel cars too.Can cause some problems on diesel cars with canbus (one ecu is lying on the ground now.)
Dont use it with volvo but honda and toyota is ok.

[HSN]

Allscanner works ok on Toyota,but on volvo,it has lots of problems.Not working on s40 below 2004 and not working on newer diesel cars too.Can cause some problems on diesel cars with canbus (one ecu is lying on the ground now.)
Dont use it with volvo but honda and toyota is ok.

Ok that is known, thank you for sharing your experience!

But what is with VOLVO and MVCI??

Is there any FULL compatible interface which works with VIDA?

[HSN]

Ok for Volvo they have the drivers, so it should be possible to work with VIDA and a MVCI?

Have someone tested it?

[card2diag]

my friend got one,working perfect,online update,online service.if somebody interested ,you can try

( link removed)
(http://www.ufodiag.com/AD900+key+prog-hot/) (http://www.ufodiag.com/AD900+key+prog-hot/)
(http://www.ufodiag.com/AD900+key+prog-hot/)
(http://www.ufodiag.com/china++j2534+programmer-hot/)

[HSN]

No, i ask if someone here have tested it, not someone in China ;-)

[card2diag]

worked ,tested it

[8k65m]

Hi! Where difference (except price) MINI VCI TOYOTA TIS vs MVCI TOYOTA TIS? Anyone can say?
MINI VCI TIS_Professional Tools_Diagnostic Tools_Auto ECU Tools_obd2, auto scan tool, auto ecu, auto scanners, key programmer (http://www.sinosells.com/goods-3638-MINI+VCI+TIS.html)
MVCI for TOYOTA HONDA VOLVO_Professional Tools_Diagnostic Tools_Auto ECU Tools_obd2, auto scan tool, auto ecu, auto scanners, key programmer (http://www.sinosells.com/goods-1381-MVCI+for+TOYOTA+HONDA+VOLVO.html)
All china clone.

[Dex Dexter]

Hi all ,
Better buy Mongoose interface works very well and is supported by toyota

[8k65m]

And the price alike whis MINI VCI TIS? Give me link,please.

[8k65m]

Mongoose Versions:
M-VPWCAN - Compatible with most General Motors and newer domestic vehicles
M-PWMCAN - Compatible with most Ford and newer domestic vehicles
M-ISOCAN - Compatible with most European, Asian, and newer domestic vehicles

Bus Protocols Mongoose VPW CAN/ISO 15765/GMLAN GM Class2 (J1850VPW)
Mongoose PWM CAN/(ISO 15765 J1850PWM
Mongoose ISO CAN/ISO 15765 KWP2000 (ISO9141 / ISO14230)

MINI VCI Supported Protocols:
K-Line ISO 9141
KWP 2000 ISO 14230-4
SAE J1850 PWM
SAE J1850 VPW
CAN 2.0B ISO 11898
CAN ISO 15765-4

I not certain that Mongoose better.

[card2diag]

And the price alike whis MINI VCI TIS? Give me link,please.

see:
( removed link )
hope it can help you
if yes,thank me

[8k65m]

Sorry, but this can not to help me. I am an interest by opinion owner MVCI for TOYOTA TIS.

[zsolty_szasz]

Hi,

For testing I need volvo driver for mvci. Please upload.

Kind regards,

[zsolty_szasz]

For volvo do I need to connect the black adapter or not?

[sosautomotive]

Ok that is known, thank you for sharing your experience!

But what is with VOLVO and MVCI??

Is there any FULL compatible interface which works with VIDA?


for volvo you can use volvo dice that works with VIDA. google it.

[Klmauto]

Check it for Volvo: http://www.sinodownloads.com/down/download/ecutool/3530016volvo.rar

[8k65m]

And where is result of the test?

[zsolty_szasz]

Volvo is working great but you must use the black adapter. Tested on 2 cars. But the software you must install on clean Windows.

[morito]

HI

are you sure works volvo and honda hds whit mvci?

many thanks

[etronic2]

Volvo is working great but you must use the black adapter. Tested on 2 cars. But the software you must install on clean Windows.

What adaptor you're talking about?

[zsolty_szasz]

Honda I never tested, and maybe its not working, too. But Toyota and Volvo its working good. There is a black OBD adapter which came with the package and its surely of Volvo.

Best regards,

[bsv2001]

Hi

Some week ago I bought MVCI from China I received it on last week, installed all driver and tried to connect to Honda Jazz
MVCI didnt connect to car and power led didnt light First I checked all connector in MVCI and I saw that 16 pin was ragged I opened cover and began to test circuit
I was surprised!!! Chines forgot to sold L51 element! see atached I Solded it and will try to test again in nearest future
The solder of plate is very BAD!!! (by hand in dark room)
Regards
Sergey

[zsolty_szasz]

How we can update the software for Toyota? My version can comunicate only with 1 model of Toyota Land Cruiser.

[Kfir F]

Anyone bought/used this tool before with these software ?

link: China ECU Tools Centre (http://www.cnecutool.com/productshow.asp?id=2778&sortsid=&sorts=)

I am thinking of getting one. Looks good for the price, especially if all functions supported on all softwares.

Does anyone have any experience with these softwares/interface ?

Thanks.



My friends has do business with they before, this seller is bad,so awfull, this is a cheater.

[Loaded]

It works very well with the Techstream, no complaints there. Can't get Vida to work though because after I login with "admin" I get "no valid subscription"

The case quality is pretty good actually, I was suprised, but as a previous poster said the soldering inside is not good. Had this before with Chinese stuff - always have to make good the electronics before using it.

I've got a blue GNA600 for Honda though so not tried it with that.

HTH

Stay away from Autosky - Reede Huang - thief !
Use OBDSVS, Jenny is very good, you always get a tracking number within a day of purchase.

[zsolty_szasz]

Techstream doesnt work with all toyota models for me, I mean the car list is not vast. Volvo works better for me, no complaints on volvo, I made for testing vida installation under vmware and since then its working real great.

[nicole99wu]

Anyone bought/used this tool before with these software ?

link: China ECU Tools Centre (http://www.cnecutool.com/productshow.asp?id=2778&sortsid=&sorts=)

I am thinking of getting one. Looks good for the price, especially if all functions supported on all softwares.

Does anyone have any experience with these softwares/interface ?

Thanks.
yes chinese clone mvci is cheap, but it works just one or two, then it can't wrk, i suggest you buy the originakl one.

[tkinyan]

yes chinese clone mvci is cheap, but it works just one or two, then it can't wrk, i suggest you buy the originakl one.

You buy another chinese clone MVCI called Mongoose, and it works prefect with Toyota, even I can pair up keys with it. And it is nearly same price with clone mini MVCI,

[hafido1983]

i buy m-vci toyota honda volvo clone
and i want to know is work well or no
i need your suggestions who tested this tool
thanks in advance

[hafido1983]

really i want your opinion about m-vci toyota honda volvo
i need your suggestions....?

[hafido1983]

no idea about m-vci

[heigo003]

Don't buy. it's crapp. Only techstream works, and only can read trouble codes. Cant customize or override ecu. Next cheapest, i think is openport tactrix 169$

[tajoloco]

Hey guys, I have a toyota corolla and wanted to buy a machine for Toyota, for diagnosis and if possible, to program and code. Can you advise anyone who is well and is cheap? course, also the program and where to get it. Thanks and regards

[Pzolee]

Hi all.

I have MVCi interface.....ORIGINAL.

How to work Volvo Vida 2011 or 2012?
Read vehicle....vin ok.

Diagnostic not work....:-(

[food111]

Hi all ,
Better buy Mongoose interface works very well and is supported by toyota

what about mongoose and Chinese tis techstream software ? i mean i buy mongoose and i use tis techstream included with chinese mcvi interface kit.

[food111]

Hi all ,
Better buy Mongoose interface works very well and is supported by toyota

what about monoose interface and cracked tistechstream software come with chinese mvci kit?

[airbag dude]

ReInstall TIS with a newer edition and it will solve the limited model issue. I use it mainly for Prius issues and it works swell. Tested on a 04-11 prius and 2013 seinna and 2003 Hilander. I am using MVCI and Xhorse. Works awesome. Able to read codes on ABS and airbag and reset them. :)

[DPARISI01]

247670Hello everyone, I have a problem with M-VCI XHORSE clone
by mistake I changed the firmware ept mprog with the FTDI ....
now do not remember the correct values ​​for the i / o ports
there someone who could tell me the values ​​for c0 c1 c2 c3 c4?
I'd be grateful ... if you can not see how you can download
FTDI Utilities (http://www.ftdichip.com/Support/Utilities.htm) from the utility mprog 3.0
and inserting the USB interface on doing research with the command TOOLS ----> READ AND PARSE
THANK YOU in advance!!!!!:joyous:

[Muhmas]

Ok... old thread... but anyone that can post firmware parameters or the file for M-VCI?

[Anachem]

Ok... old thread... but anyone that can post firmware parameters or the file for M-VCI?

https://translate.google.com/translate?hl=en&sl=ru&u=http://malykh.blogspot.com/2014/11/mini-vci-j2534-64-windows.html&prev=search

[Stelaras26]

If you want to work with all these,you must install the old versions too...New versions are not supported...