PDA

View Full Version : need login for this dash VW caddy = Golf 5



jokersat
29th August, 2010, 12:26 AM
need help as quick as possible

jset
29th August, 2010, 10:59 AM
do you have dump with ecu
thanks

yugo45
29th August, 2010, 03:37 PM
SKC is in Immobilizer eeprom, not in dash eeprom.

exe123
29th August, 2010, 03:53 PM
SKC is in Immobilizer eeprom, not in dash eeprom.

On this car dash = immobilizer.
login in dump but crypted.

use k+can, can commander or dashcan... this is a dash from 2004. any of these tools will read the login without any problems.

laldog
29th August, 2010, 04:51 PM
On this car dash = immobilizer.
login in dump but crypted.

use k+can, can commander or dashcan... this is a dash from 2004. any of these tools will read the login without any problems.

I struggled with a caddy edc15 2004. Could not get code from immob or dash ecu. had to give up in the end,only one i have been stuck with for a while!!!!!!

yugo45
30th August, 2010, 05:55 AM
On this car dash = immobilizer.
login in dump but crypted.

use k+can, can commander or dashcan... this is a dash from 2004. any of these tools will read the login without any problems.
Yes, dash=immo.
But they are 2 separate modules inside of dash,and SKC is not store in dash module.
It is store in immobilizer module.

exe123
30th August, 2010, 08:35 AM
Yes, dash=immo.
But they are 2 separate modules inside of dash,and SKC is not store in dash module.
It is store in immobilizer module.

sorry, but you have no idea what you are talking about.
Dash and immo are one module. everything is stored in the dash eeprom.

branimirj
30th August, 2010, 12:17 PM
Read pin with k+can comander.Dash and immo is in the dash but diagnose is separate.regards

yugo45
31st August, 2010, 04:20 AM
sorry, but you have no idea what you are talking about.
Dash and immo are one module. everything is stored in the dash eeprom.
This is a IMMO4 generation and they not same as IMMO3 was,
SKC is in address 25 immobilizer,Adaptation of key is in address 25 immobilizer, not like in IMMO3 in address 17 instruments.
So to get SKC you need to read Immobilizer eeprom .

exe123
31st August, 2010, 07:17 AM
I think you don't understand. Dash is immobilizer. Just because it has 2 address means nothing.
Check partno of immo. It is the same like dash.
Dash has one MCU - Micronas + Eeprom (24C16/24C32)
There is no other eeprom in dash.

All immo data (Vin, SKC, Keydata, Immoid, Configuration-ID, MAC, Status) is stored crypted in the eeprom where also the km is stored.

So stop saying something which is not true.

marinero123
31st August, 2010, 07:28 AM
I think you don't understand. Dash is immobilizer. Just because it has 2 address means nothing.
Check partno of immo. It is the same like dash.
Dash has one MCU - Micronas + Eeprom (24C16/24C32)
There is no other eeprom in dash.

All immo data (Vin, SKC, Keydata, Immoid, Configuration-ID, MAC, Status) is stored crypted in the eeprom where also the km is stored.

So stop saying something which is not true.

yes , you have right . Another "special" unit like this is navigation unit which have 2 addresses : radio and navi.

swat cat
31st August, 2010, 08:01 AM
passat b6 has the units separeted.... `couse it got the immo box on the steering

georgegt
31st August, 2010, 08:19 AM
Yes it's true I stat one without dash and thn I make diagnose and immo respond in address 25
Immo 4 first model are inside of the dash but in new model are separated

exe123
31st August, 2010, 09:36 AM
Yes it's true I stat one without dash and thn I make diagnose and immo respond in address 25
Immo 4 first model are inside of the dash but in new model are separated

Has nothing to do with immo4 or not. It is depending on the car.

Golf V, Golf VI, Scirocco, Eos, Touran, Caddy, Octavia, A3, TT, R8 are all using VDO. These have immo in dash.

Passat is also using VDO dash but without immo in dash.