PDA

View Full Version : Signal to high on Eurovox Max v



toe471
29th August, 2010, 07:26 PM
My signal strength is around 93% and wanting to lower it quite a bit due to the picture breaking up a bit.

What do i need to plug into my cable to kind of block it out a bit??

chic.
30th August, 2010, 09:09 AM
Hi m8 depending on the box you have you could go to menu>config>tv settings and turn off the booster , or you can try a attenuator

toe471
30th August, 2010, 05:07 PM
Cheers for the advice chic!

My menu does not have the booster option so i may try a attenuator, i have found a little square box with cable did fit which you connect your cable in one end then the other you just connect up to your box, it may redude it slightly?

davieboy.rfc
31st August, 2010, 10:08 PM
:barscarf:
Cheers for the advice chic!

My menu does not have the booster option so i may try a attenuator, i have found a little square box with cable did fit which you connect your cable in one end then the other you just connect up to your box, it may redude it slightly?

konig attenuator from b&q or maplins 6 quid that will do the job..