Audi A4 Bosch Crypto dash problem

[biktel]

i have a question for a4 bosch rb4 crypto. I've readed eeprom with VAG K+CAN commander, I've chanded the mileage with licznik48a, I've wrote back with K+CAN, all ok, but bord computer does't work. Whene I've checked the dump, the VIN from eeprom was corrupt. I've corected the VIN, but still not working the bord computer.
Here is my dump

[aivarys]

is this your original eeprom?

[biktel]

is this your original eeprom?

Here is my original eeprom.

[potatodog]

If you write the original back everything is okay?

[biktel]

If you write the original back everything is okay?

No, if I write the original dump still doesn't work

[tachonow]

Your first read was bad then your saved dump isnt more the original. After modify obviosly that original was lost by writing the bad dump. Now you need another dump with original sw, adapt keys and make codings.

[biktel]

Your first read was bad then your saved dump isnt more the original. After modify obviosly that original was lost by writing the bad dump. Now you need another dump with original sw, adapt keys and make codings.

Where can I find original sw?

[GMXcool]

Hi

Not go with another dump.

Solution :

DeJaVu or Abritus

Regard



Where can I find original sw?

[exe123]

Car is starting? If yes I can maybe help you.

[biktel]

Car is starting? If yes I can maybe help you.

Car is starting becouse is immo off

[exe123]

then crypto part of dump is also damaged. you cannot repair it with different dump. only dejavue from dialab will do it.

[totalfree]

Hi.
Try this:

[biktel]

Hi.
Try this:


That file doesn't work. No bord computer. Thanks anyway

[marius7592]

Vag k+Can (China) i think is not a good tool for a4 bosch rb4 crypto, try write with another tool, vag dash prog or with other.

[honingkoning]

That file doesn't work. No bord computer. Thanks anyway
did you solve your problem other wise give your vin i can ad new vin for you.

Best regards Honingkoning

[learing1]

Does anyone have 8E0 920 900 L
It would be appreciated.

[drpeter]

Vag k+Can (China) i think is not a good tool for a4 bosch rb4 crypto, try write with another tool, vag dash prog or with other.

I read and wrote about 40 A4 RB4 cars with vag + k 1.4 commander and never had a problem, now I use other tools.

I will look tonight and sent all these files to you, one of it must be the same :-)

[maumaumau]

if is good for you,please tell us...

[GMXcool]

Hi

Other dumps

regard

[learing1]

Wow. Thanks so much for your help :)
This will be a sure fix now.

The 8E0920900L - D36 was the one i needed. Thanks

Attached is 8E0920900GX D28 this is a virgin dash not coded to vehicle.

[learing1]

if is good for you,please tell us...

Any idea what the PIN and current mileage is. This bin should be compatable.

I wanted to do some editing before testing because the needles need to be removed.

Not 100% sure on how to Decrypt and re-encrypt, edit RB4.
I'll have to spend some time figureing how to edit. My A4 Calculator needs exisiting Miles :(

Thanks

[Valrod]

I write for the D22 version 8E0 900 920 G and the immobilizer lamp lights
You must perform some other operation in addition to writing
the eprom?

Thanks.

[bisnao]

Hi m8's

i have a rb4 with problems after battery went down and jump start the car.
The instrument cluster pointers dont work(rpm and Kms) also there is a oil light flickering on the the display. Is there any solution for this besides buying a new cluster?
original 24c08 read from programer

thanks

[frikki]

i think you must start ure own thread mate for assistance. cheers.

[NogaroB5S4]

bisnao (http://www.digital-kaos.co.uk/forums/members/38297-bisnao/)...

I modified your dump. Give this a try and report back.

:tee:

[bisnao]

Thanks m8

Going to test it tomorrow.
And will let you know.

thanks a lot

[bisnao]

Hi,

Tested your file , everything working except navigation and board computer.

B.R.

[NogaroB5S4]

You mean?

1) there is no NAV info showing on your board computer?

or

2) board computer not lighting up at all?

If 1).. Then.. Load in your previous dump and read Dash Adaptation CH 62 value.. Then load reapired dump and copy the same value for Adaptation CH 62 from your original dump.. I think it should be 5 based on this:

Audi A4 (8E) Instrument Cluster (8EC/8ED/8HE) - Ross-Tech Wiki (http://wiki.ross-tech.com/wiki/index.php/Audi_A4_%288E%29_Instrument_Cluster_%288EC/8ED/8HE%29#Channel_060:_CAN-Databus_Powertrain_.28Installation_List.29)

Don't forget the "thanks" button :itsme:

[luiggii79]

please help me I have audi a bosch in RB4. not have the original dump. error appears on the display, I need to dump it to appear on the display km. Thank you

[DeLuXe]

Hi,

Does anyone here please have a complete set of dashboard for 8E0 920 900 L ? 24c08 AND 95640?

Thanks in advance,

Best regards,
DeLuXe