VW TOUAREG 2006

[pinky1970]

HI THERE, WHAT I THOUGHT WAS ONLY TO BE 2 MINUTE JOB, ISNT WORKING TRYING TO PROGRAM BY DAIGNOSE PLUG. TACHO GUIDE SHOWING TO JOIN A6 LEAD TO SHARAN CONNECTER. IN MY LEAD LIST, I DONT HAVE.
\
WHAT I DO HAVE IS CABLE 25 SHARAN 2000, CABLE 27 OBD2 VW+OPEL, CABLE 23 VW CAN , 3 CAN DONGLE, TRIED ALL OF THEM WONT READ COMES UP WITH SW. NEXT SCREEN KM0000.

WHICH LEAD TO USE FOR THIS JOB, TOOL TACHO 2008.

ANY IDEAS PLEASE.

[milesbetteroff]

Hi mate it's the new version you will have take it out and do direct 24c32 in cluster it is not the same as the old one but the mileage incription is In three places not hard to see

Milesbetteroff here to help

[pinky1970]

tried today again to do Touareg by dash, had 24c08 eeprom took it off to be safe, tacho reading gernal failure in reading, checked 24c== board all ok chip was in the clip ok.

will VAg com, do this. motor is dated being made 10/11/06.

[deffc0n]

What think about this interface via obd for Touareg 2006 ?

Vag dash can usb

professional VAG DASH COM+CAN products, buy professional VAG DASH COM+CAN products from alibaba.com (http://www.alibaba.com/product-gs/328717295/professional_VAG_DASH_COM_CAN.html)

http://i01.i.aliimg.com/photo/v0/328717295/professional_VAG_DASH_COM_CAN.jpg

[tachonow]

What think about this interface via obd for Touareg 2006 ?

Vag dash can usb

professional VAG DASH COM+CAN products, buy professional VAG DASH COM+CAN products from alibaba.com (http://www.alibaba.com/product-gs/328717295/professional_VAG_DASH_COM_CAN.html)

http://i01.i.aliimg.com/photo/v0/328717295/professional_VAG_DASH_COM_CAN.jpg
If you can make this clone working good you are a genius mate !

[deffc0n]

I khnow is clone why no good work ?
Who use this interface ?

[diga1]

i bought it two weeks ago and isnt vorking, so i sent it back to china

[Artjom]

I also bought this one.. but forget it.. also the chine sellers tell you before that it is seldom working ..

[blackpirate]

what about this one?
VAG DASH CAN 5.14
China ECU Tools Centre (http://www.ecutool.com/productshow.asp?id=4189&sortsid=&sorts=)

[deffc0n]

This moment i have ver 5.14 i want change milage in touareg 2006 first section all ok software get me info about dash and message wait 5 seconds and when stop read eeprom get message and dash in car on/off:

The rescue file doesnt math with expected criteria

Who have this same error and fix ?

BR