MB stardiag trouble

[stevan]

My stardiag stop working.
I get Fault (1.1)-1.501.9323,initialization of diagnosis multiplexer failed.......
Can someone advised me what to do,i have re-solder multiplexer but no help.What IC to check for damage?
2x7805 work,7808 work,diodes ok.......

with caesar i get this report:

CAESAR STOS+ Rev.:2.10 from Mar 11 2004
generated protocol file from 07.09.2009 01:30
SystemCheck :
Check serial ... 0 Ok
CAESAR HW Detection :
D2Access ... 0 Ok
D2DownLoad ... 0 Ok

CAESAR Part D2 detected on COM2 with baudrate: 19200
CAESAR version check :
D2CheckSNVER ... 303 Not possible to test this version of HW
Special EEPROM check :
D2 Special CAN Test :
Special Test ... 2808 No Response from slave
CAESAR version check :
D2CheckSNVER ... 303 Not possible to test this version of HW
Slave check :
D2 Slave check
D2 Processor ... 2808 No Response from slave
D2 RAM ... 2808 No Response from slave
D2 FLASH ... 2808 No Response from slave
D2 EEPROM ... 2808 No Response from slave
D2 SERCTL1 ... 2808 No Response from slave
D2 UART1/2 ... 0 Ok
D2 ADC ... 2808 No Response from slave
D2 Display Power Supply :
D2 Power Battery ... Voltage KL30 = V
D2 Power Ignition ... Voltage KL15 = V
D2 Voltage K-Lines :
D2 State K-Lines (35) ... Total 0 (+), 0 (-), 35 Error(s)
stevan is online now Add to stevan's Reputation Report Post Edit/Delete Message

[stevan]

here caesar

[stevan]

Noone have experience with this problem ?

[stefan]

Maybe you should be check cables and Com port. Have you made a new installation of DAS prior to the occurrence of the problem?

[stevan]

Friend's Star interface work ok on laptop,and my interface also not work on his T30. So error is 100% in interface.