View Full Version : old opel immo problem
M.Jojo
7th September, 2010, 11:55 PM
hy I read a lot of opportunities to x14xe Delco ecu immo off
but a problem is to read it 29f010 tried to rewrite the original content and would not let (the original brushed): (
Why is that?
i have the original beeprog
Has anyone encountered this problem???
:(
Mac Gyver
8th September, 2010, 03:21 AM
M.Jojo,
29f010 is not a chip problem to read and write, can unless you have poor electrical contact between the chip and pin the adapter.
M.Jojo
8th September, 2010, 07:26 AM
thanks god
marinero123
8th September, 2010, 09:10 AM
beeprog allways check pin connections for device inserted into his socket , so you must have there poor contacts ..
To re-write one used device , first time you must erase it.
M.Jojo
9th September, 2010, 09:20 AM
I was wrong because it is not removed before
:idea:
M.Jojo
9th September, 2010, 09:28 AM
the immo is still not good please help
have all tried but with either two vezrdi?t Inula
Hc11f1 everything I rewrote the original FF did not help visszairtam
29f010 write off immo file, ignition, I wrote back to the original, will not start: (
this is the original file
M.Jojo
9th September, 2010, 09:31 AM
ecu:
opel corsa x14xe
delco 16202329
d96011 bzkx
cristi_bv
9th September, 2010, 02:07 PM
try this for hc11 and put original dump in 29f010
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.