Temic 9648665580

[Smac_a]

Hi everyone!

I have a problem with temic unit that i don't know how to disassemble to read motorola... How can i get pcb off the housing and connector (its in one piece). The connector pins in the bottom of pcb (second pic) don't seem to be soldered, but i don't wont to break it.

Any help would be appreciated,
Smac_a

http://img525.imageshack.us/img525/9378/0243u.jpg

http://img29.imageshack.us/img29/7820/0244n.jpg

[morfej]

Easily can get off by connector pins. Do it with feeling and a big screwdriver for example. Look the picture of "deattached" pcb.

[Smac_a]

Thank you!

Regards,
Smac_a


Easily can get off by connector pins. Do it with feeling and a big screwdriver for example. Look the picture of "deattached" pcb.

[pinheiro]

hi,

With a simple programmatter UPA/X-prog, you solve the problem in pcb.

pinheiro

[Smac_a]

Hi.

Done it already (with Morfej's method), but this will be usefull info for somebody else with similar problem.

Thanks,
Smac_a




hi,

With a simple programmatter UPA/X-prog, you solve the problem in pcb.

pinheiro

[morfej]

pinheiro: But problem is that not always we know where to connect BKGD and other pins at this side of the PCB :(, except if be done one before and make a picture you have done.

[domel45]

I have the some airbag Temic 9648665580 with HC912B32. Can anybody mark connection to read from PCB that model.

Thanks in advance.


http://img20.otofotki.pl/miniaturki/cj9609_mini_IMG_0903.jpg (http://img20.otofotki.pl/cj9609_mini_IMG_0903.jpg.html) http://img20.otofotki.pl/miniaturki/vt2814_mini_IMG_0904.jpg (http://img20.otofotki.pl/vt2814_mini_IMG_0904.jpg.html)

[morfej]

Take a multimeter and check it yourself, it isn't so hard :)

If you need pinout of the HC912B32, let us know.

br

[domel45]

Connection points to PCB

http://img20.otofotki.pl/miniaturki/rf6106_mini_IMG_0903-connection.jpg (http://img20.otofotki.pl/rf6106_mini_IMG_0903-connection.jpg.html) http://img20.otofotki.pl/miniaturki/ys5497_mini_IMG_0904---connection.jpg (http://img20.otofotki.pl/ys5497_mini_IMG_0904---connection.jpg.html)

special thanx to "morfej" for motivation

[churry]

Easily can get off by connector pins. Do it with feeling and a big screwdriver for example. Look the picture of "deattached" pcb.

hello morfej.


the method great for removing the plate and access to Menorca 95160.

I already touched on another occasion this same drive and I had to cut the top cover and a lot of work.

had not seen that connector pins are not soldiers.

great information thanks.

Now unsolder memory to read the file and put him clean.

But I want to ask

Is there a way to reset the airbag control units without having to open, through the connection of the unit.

great information thanks

I hope to answer

thanks

[morfej]

Havent' seen a tool that can do that.

Carprog can do temic airbag through K-line where inside is HC912B32 without 95160 eeprom.

br

[Marek_Spy]

Hi
Does anyone know connector pins? photographs no longer :upset: I do not want to desolder because I'm scared damage . Maybe someone knows a way to do it, I have carprog