PDA

View Full Version : help need airbag clear 06 honda civic



shumo7722
13th September, 2010, 10:58 PM
hi i need a clear for a Honda civic 06 airbag module 77960-sva-a211-m1. eeprom 95640.thanks in advance

lwood
13th September, 2010, 11:48 PM
here you go..
try and report?

maRtins.Pt
14th September, 2010, 01:14 AM
try this and report

shumo7722
15th September, 2010, 09:17 PM
does not work for both codes. any suggestion why. reader saying internal system failer

ChVlad
16th September, 2010, 06:34 AM
Hi.
Try this.
Please report.

shumo7722
17th September, 2010, 05:31 PM
does not work

engvitinho
17th September, 2010, 05:51 PM
hi i need a clear for a Honda civic 06 airbag module 77960-sva-a211-m1. eeprom 95640.thanks in advance
TRY THIS DUMP
BEST REGARDS

nanux
17th September, 2010, 06:06 PM
This should work, test it.

lwood
17th September, 2010, 10:37 PM
hi i need a clear for a Honda civic 06 airbag module 77960-sva-a211-m1. eeprom 95640.thanks in advance

i think there is something else wrong with the civic you have.. because the clear dump i made you 100% tested. i have done 10 civic with that same module number and all work ..

jawnuolis
19th September, 2010, 03:11 AM
i think there is something else wrong with the civic you have.. because the clear dump i made you 100% tested. i have done 10 civic with that same module number and all work ..
you sure? because your cleared dump don`t look 100% working......
shumo7722 check attached dump it should work......

randewoo
19th September, 2010, 05:20 PM
you sure? because your cleared dump don`t look 100% working......
shumo7722 check attached dump it should work......

Yours not good as well. Problems with ODPS.

Try mine. You might will need to reset the codes.
Pass in PM
If you'll have problems please share your codes for airbag and ODPS.

shumo7722
20th September, 2010, 04:33 PM
ok ill try today

shumo7722
21st September, 2010, 04:32 PM
ok it still does not work . first dtc code is that the opds does not calibrate and the second one is front passenger weight sensor. the sensor reads 127 lbs of weight when its empty. i never had a bad seat?? help

shumo7722
21st September, 2010, 04:33 PM
is it the computer or the seat sensor

nanux
21st September, 2010, 07:38 PM
This is one more to try, clean.

randewoo
21st September, 2010, 09:05 PM
If your sensors connected, battery good and fuses Ok than you have to initialize ODPS unit. No way to make your dump "cleaner"... I guess you didn't change passenger seat/ODPS module, right?
Otherwise you'll need to put everything back.
Let's go to stealer if you dont have X431 or Autoenginuity. 5 minutes job :-(

shumo7722
22nd September, 2010, 12:08 AM
This is one more to try, clean.

your file worked thanks alot , and to every one else.

shumo7722
22nd September, 2010, 03:34 AM
this file worked