Solution for clone VCDS 908 with FT232R

[bibkare]

Recently there are a lot of users with the same problem. They are starting new threads without reading previous posts and thus forum is getting spammed. My suggestion would be that all questions, problems and solutions related to vcds hardware and software goes to one thread like we had before. (Tutorial...) Now we have good thread called http://www.digital-kaos.co.uk/forums/f152/vag-com-vcds-everything-99750/

This solution has been posted earlier by our forum colleague Aminebot, so all thanks goes to him.

[randomlog]

great!!!

i'll test.

i never imagined that a human can be make this mods... do must have great eyes....

i need some news tools xDDD

[bibkare]

Our friend Xoom is very good at this, maybe you should ask him for a little help

[StankCheeze]

Is this style of cable the typical one you can just buy off ebay? I don't want to order one and then have it be different.

[bibkare]

Is this style of cable the typical one you can just buy off ebay? I don't want to order one and then have it be different.

this type of hardware is common for chinese clones since version 908, however you can ask from your supplier to send you a pic of pcb so you can see for yourself but it's much better to order version with FT232BL

[alfamarek]

Many thanks for info. I am going to recover few already crashed vag-hex-usb interfaces. It is great, that I can find here many suggestions.

[ivica]

Thank you for this great solution

can someone post dumps again, becaouse rapidshare links are dead ?
Best regards

[bibkare]

Thank you for this great solution

can someone post dumps again, becaouse rapidshare links are dead ?
Best regards

Dump is here http://www.digital-kaos.co.uk/forums/f152/vag-com-vcds-everything-99750/index5.html#post747646

[matekhr]

this type of hardware is common for chinese clones since version 908, however you can ask from your supplier to send you a pic of pcb so you can see for yourself but it's much better to order version with FT232BL

What is the solution for FT232BL based interface?

[bibkare]

What is the solution for FT232BL based interface?

Solution for that is here http://www.digital-kaos.co.uk/forums/f152/vag-com-vcds-everything-99750/

[matekhr]

Solution for that is here http://www.digital-kaos.co.uk/forums/f152/vag-com-vcds-everything-99750/

I read the whole thread, but didn't find the simple answer.
I have a FT232BL based interface upgraded fom 714 to 805. Now I want to upgrade it to 908.
Is it enough to flash ATmega with arash dumps?
Or must I remove some components, too?

[bibkare]

I read the whole thread, but didn't find the simple answer.
I have a FT232BL based interface upgraded fom 714 to 805. Now I want to upgrade it to 908.
Is it enough to flash ATmega with arash dumps?
Or must I remove some components, too?

I am really sorry that you couldn't find a simple answer for your question, maybe most simple solution for you is to buy an original vcds, in that case update is very simple

[IzzyC]

Recently there are a lot of users with the same problem. They are starting new threads without reading previous posts and thus forum is getting spammed. My suggestion would be that all questions, problems and solutions related to vcds hardware and software goes to one thread like we had before. (Tutorial...) Now we have good thread called http://www.digital-kaos.co.uk/forums/f152/vag-com-vcds-everything-99750/

This solution has been posted earlier by our forum colleague Aminebot, so all thanks goes to him.

What software do i use to do the reflash also how to i remove the components

[bibkare]

What software do i use to do the reflash also how to i remove the components



My friend, it is much better to find someone experienced in electronics, smd soldering etc. to do that for you because you are asking questions which are answered 100000 times, you just need to learn more and even if you find everything you need to know you will still have lack of skill.

[kaosdigital]

I am very new to buying vw, audi interface. Don't know what to buy and where. Can some one give me more info of what kind, where, what to buy and what not....thanks in advanced.
I have AutoEnginuity Proline adapter but doesn't communicate any VW, Audi, European cars. So I like to buy alternative European car interface. Please help. Thanks.

[scofield31]

thanks, i want vcds 908 FR please

[kangakoo]

I have bricked chinese 10.6 version with FT232RL. Hope this files can help me...

[samiko]

Can somebody provide the original dump GAL16V8 china interface 908 or 106 with the chip-RL?
thanks for help

[lukisio]

Please 908 ftdi RL damp in xlm :)

[level]

This bin working with 232bl , for shematic with 232rl
not working .3 wires from atmega to gal not help . 20,21,22 pin atmega not connect with 2515

[apophizz]

Can anybody tell me, how i can re-flash the GAL chip? i found nothing about this...

regards

[cniky]

search for " galblast "

[delux]

thanks for all :)