PDA

View Full Version : I need help wiht abs renault laguna 2005



jjas40
14th September, 2010, 08:38 PM
hi
I have a renault laguna 2005 1.9dci year, with bad abs
abs is ATE 00009361e0
dtc: c1124 bad pressure sensor circuit.
any ideas?
Common fault?
thanks and regards

jjas40
15th September, 2010, 12:31 PM
hello
and mount another abs?
adaptation?
eeprom leads?
thanks

antibisic
16th September, 2010, 10:03 AM
Go with car to dealer and dealer should replace a new abs for free!!

dik
16th September, 2010, 10:05 AM
Go with car to dealer and dealer should replace a new abs for free!!
Do these cars come with 5 year warranty, or will they just fix it free for fun

antibisic
16th September, 2010, 02:06 PM
No this is serial fault that,s why they would fix it:rock:

jjas40
17th September, 2010, 07:36 PM
hi
the car has more than 5 year
any idea?
thanks

seano123
17th September, 2010, 11:56 PM
hi, you could have a internal fault with a pressure sensor within the unit if so replace

jjas40
19th September, 2010, 12:21 PM
hi
anyone have photos inside abs module?
eeprom?
thanks

jjas40
20th September, 2010, 09:04 PM
hi
the eeprom can be at25080?
thanks

rsilva
20th September, 2010, 10:21 PM
Hi, i had a problem once with an ABS from a Laguna 2002 and had to replace it for another one. It had a 25LC040 eeprom. Hope to be helpfull.

Best regards
Rsilva

antibisic
24th September, 2010, 01:40 PM
hi
the car has more than 5 year
any idea?
thanks


it doesn,t metter how old is just try what I say

eduardo74
14th December, 2010, 08:00 AM
Go to Renault dealer!

bsv2001
14th February, 2011, 07:19 PM
This ABS possible to recovery

automan
14th February, 2011, 08:30 PM
This ABS possible to recovery
how do you solve it?

bsv2001
14th February, 2011, 09:48 PM
You must to remove ABS from car After you must open black cover (This is very difficult and be carefully!!) After you can see basic plate with CPU and a lot of gold and platinum think wires
Check all this wires Also check Vcc and ground All this contacts must have very good connection
The most causes of bad ABS are in wires connection with basic plates
see attached files
Regards

automan
15th February, 2011, 12:03 AM
seem like standard abs repair.did you solve like this with this error from topic?
br
edit: between transistor pins 1 and 2 is diode?