View Full Version : A4 IMMO
wizz2c
15th September, 2010, 02:04 PM
HI to all, i have i a4 1.9 tdi with ecu 0 281 001 366/367
vag no. 028 906 021 f
does anyone know if immo is stored in the B58196
Correct me if im wrong i think that B58196 is 93c46
many thanks
jaza9
15th September, 2010, 02:10 PM
Yes, immo is in B58196.
wizz2c
15th September, 2010, 03:07 PM
Yes, immo is in B58196.
thanks, i am i right to read as 93c46?
wizz2c
15th September, 2010, 03:11 PM
here is dump could someone please remove immo if poss.
many thanks
adam28
15th September, 2010, 06:10 PM
Hi mate
Is your ECU a BOSCH MSA 11 EDC1
If so you could try this but its untested.
Cheers
wizz2c
15th September, 2010, 06:49 PM
Hi mate
Is your ECU a BOSCH MSA 11 EDC1
If so you could try this but its untested.
Cheers
Cheers adam, not really sure i only have the numbers on the ecu and i listed them in post one and this one is a bit old its of a 95 and i never had the pleasure of doing this type before. but i'll give it ago and report back.
treo
15th September, 2010, 06:59 PM
HI to all, i have i a4 1.9 tdi with ecu 0 281 001 366/367
vag no. 028 906 021 f
does anyone know if immo is stored in the B58196
Correct me if im wrong i think that B58196 is 93c46
many thanks
You must find 2 eeproms B58196 in ECM, read both and post here.
wizz2c
15th September, 2010, 07:38 PM
You must find 2 eeproms B58196 in ECM, read both and post here.
yes your right just found the other one here are dumps
wizz2c
16th September, 2010, 08:15 AM
yes your right just found the other one here are dumps
is theres anyone else that could help please
thanks
treo
16th September, 2010, 12:06 PM
is theres anyone else that could help please
thanks
Hi
Here is 2 dumps to start your engine.
Pass in pm.
wizz2c
16th September, 2010, 09:23 PM
Hi
Here is 2 dumps to start your engine.
Pass in pm.
Thank you your files did remove immo and engine ran but accelerated on its own i found that if i edited the last byte in no2 file from 1926 to 1925 all was good although i did loose tacho gauge but i think that i may have damaged ecu during desoldering but no evidence to show damage. Getting another on monday so i'll be more carefull.thanks again.
wizz2c
17th September, 2010, 09:20 PM
got another ecu today and all is well use same files just edited last byte, thanks treo for the files hope i can return the favor sometime.:beer:
here is edited file
stundentas
28th September, 2010, 07:17 AM
Hi
Here is 2 dumps to start your engine.
Pass in pm.
I need immo off
i hope you can help me :champions:
stundentas
28th September, 2010, 08:50 AM
somebody, Please ! I already confused.
squirrelbandy
28th September, 2010, 09:15 AM
try starting a new thread instead of jumping on the end of a solved 1
ADRIANALEJANDRO
28th September, 2010, 03:57 PM
hi,i need code inmo to audi a4 wauzzz8e62a279854 thanks
ADRIANALEJANDRO
28th September, 2010, 07:27 PM
hi,i need code inmo to audi a4 wauzzz8e62a279854 thanks please:boring:
treo
29th September, 2010, 09:32 AM
please:boring:
You cant findit by chasis number.Read eeprom from ECU.
juan255
19th July, 2011, 06:38 PM
Hi
Here is 2 dumps to start your engine.
Pass in pm.
Could send me the pasword?
Thanks
Powered by vBulletin® Version 4.2.5 Copyright © 2025 vBulletin Solutions Inc. All rights reserved.