starview6 lan

[dianered]

help i have a starview6 like everyone else all channels down can anyone help with how to do it through the lan would be a great help if it was step by step. do you get all channels and is it safe to use the lan you no with your ip address any help with this many thanks:celticparty:

[super jumbe]

Connect your box with the rooter you now need to scan your channels, scan without splitters if using any,go to installation press the right arrow button again and go down to AUTO CABLE SEARCH.

All you need to change here is the symbol rate.
The symbol rate determines your area for example N*l is 6887, the other numbers are 6952 for Telepe** and EXc&w.
When you have selected your area go to start scan.

Once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off turn it on.

Then go to to your channels by exiting the menu and pressing ok.. Select a scrambled channel and leave it until a picture appears.

PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE SO BE PATIENT.
:barscarf:












WARNING:
My post is for educational purposes only and should not be taken seriously
WELCOME TO OUR WORLD

[JakeCough]

does this only work on starview 6 or would it work for starview 5? If not is there any other way of retrieving channels

[dianered]

a big thank you to super jumbe you rock man all channels back on thanks a million:celticparty:

[RALLYBOY]

Connect your box with the rooter you now need to scan your channels, scan without splitters if using any,go to installation press the right arrow button again and go down to AUTO CABLE SEARCH.

All you need to change here is the symbol rate.
The symbol rate determines your area for example N*l is 6887, the other numbers are 6952 for Telepe** and EXc&w.
When you have selected your area go to start scan.

Once the scan has finished go to menu then highlight accessory and on the remote press the numbers "8989"
you will then see "K*yedit" appear on the right hand side, go to it and press ok and just check that auto update is on if its off turn it on.....
IS this method known as cshare and can it be traced via your ip address

Then go to to your channels by exiting the menu and pressing ok.. Select a scrambled channel and leave it until a picture appears.

PLEASE NOTE IT CAN TAKE UPTO 5 MINUTES TO UPDATE SO BE PATIENT.
:barscarf:




IS this method known as cshare and can it be traced via your ip address and would you stil get same channels

cheers for your input :barscarf::thrasher:








WARNING:
My post is for educational purposes only and should not be taken seriously

WELCOME TO OUR WORLD


IS this method known as cshare and can it be traced via your ip address and would you stil get same channels

cheers for your input :barscarf::thrasher:

[cactikid]

dont hold your breath weekend here and going off again=overloaded.


yes yes and yes to all question above