Immo problem with Vito '02 model

[ggpanos]

Hi,

I have Mercedes Vito 2002 model with ECU Bosch EDC15C0 0 261 011 067 and immo-box Temic. Inside immobox there is a motorola with mask 0J66D (HC08AZ32).

Keys were lost and we call a locksmith to make a key. He made a key that opens doors and allows to crank, but engine does not start and I am getting "Start Error". I have check the key and there is not any transponder inside, thus I am getting the start error.

I have Carprog, TMPro2 and start error repair software.

My question is:

1. Do I need to do start error repair before making new transponder key?

2. Carprog expects to program transponder TK5530 but I friend has use successfully PCF7935 with carprog. TMPro2 expects T5 transponder. Which transponder I should use ? I tried Carprog with T5 that I have in stock and does not go on to program it.

3. Is PCF7935 = Silca T15 = JMA TP14 ?

[MarkPRP]

Easiest way.

Get a used WSP and Key chip matched set.

Open ECU, 24c04 chip - read - use virgin file from downloads - then re indentify with STAR (Do you have STAR) then it will all work

Or read WSP - Make key file from HC08 dump

mark

[knok]

Hi,

I have Mercedes Vito 2002 model with ECU Bosch EDC15C0 0 261 011 067 and immo-box Temic. Inside immobox there is a motorola with mask 0J66D (HC08AZ32).

Keys were lost and we call a locksmith to make a key. He made a key that opens doors and allows to crank, but engine does not start and I am getting "Start Error". I have check the key and there is not any transponder inside, thus I am getting the start error.

I have Carprog, TMPro2 and start error repair software.

My question is:

1. Do I need to do start error repair before making new transponder key?

2. Carprog expects to program transponder TK5530 but I friend has use successfully PCF7935 with carprog. TMPro2 expects T5 transponder. Which transponder I should use ? I tried Carprog with T5 that I have in stock and does not go on to program it.

3. Is PCF7935 = Silca T15 = JMA TP14 ?

with TMPRO you can write onto T5 from your dump

[ggpanos]

No need to do "Start Error" repair. Just make new transponder and car starts OK.

Thread Closed

[niho]

can i read 0J66D (HC08AZ32 with UPA programer

[panos2]

sto 27c512