PDA

View Full Version : VW POLO IMMO



cleevesy
17th September, 2010, 10:37 PM
Have vw polo 1.4 1996 in, have fault code of 00533 idle speed and the vehicle starts up runs and then cuts out, i think its an immo fault, but there are no codes in immo module, anybody seen this before. many thanks


Has bosch ECU which eeprom do i read also to make immo off?

autofan1965
20th September, 2010, 01:26 PM
Enter the immo 25,go into the match 10,enter zero and enter three times then immo match to a computer always in the immo access code

bebiloku
20th September, 2010, 03:55 PM
Enter the immo 25,go into the match 10,enter zero and enter three times then immo match to a computer always in the immo access code
read mcu from immo box

d.zio
20th September, 2010, 05:30 PM
PERHAPS IS THE THROTLE BODY.......OR THE CENTRAL FUSE BOX INSIDE....!IT HAS ONE RELAI 53(NOT SURE) AND IT HAS COLD SOLDERS........I HAVE FIXED MANY OF THEM...NO IMMO PROBLEM....!!!!(AND SORRY FOR MY ENGLISH):unionflag:

stundentas
20th September, 2010, 07:35 PM
MAYBE IT HAS main RELAY PROBLEM , THERE is COLD SOLDER on RELAY CONTACTS LIKE d.zio SAID

mlulic
20th September, 2010, 11:29 PM
Whether it has that error in engine procesor