toyota YARIS 2008

[knok]

Hi to all!
I?m looking for virgin contents of im*mo box fitted onto this car.
89780-0D011
( visteon )
inside 93C56


Please let me know what transponder is assign to this model.
Thank you , K

[shitad]

All the ones I see are for Japan Export Market and they are 4D 67

[knok]

All the ones I see are for Japan Export Market and they are 4D 67

Do you have dump as I need ?
Thank you !

[knok]

I?ve tried with other transponder ID4D-60 without any result ....
Nobody can give me one advice ?

[ashraf shaikh]

its 4d -67 or 4d-68 id keys

[ashraf shaikh]

both d4-67 & 68 will work

[knok]

both d4-67 & 68 will work

ok , please let me know how I must proceed.
I have for a few hours TOYOTA IT II tester

[ashraf shaikh]

reset the imm ecu & short the pin 4 & 13 for 30 min to sync imm ecu & engine ecu

[hakansponder]

reset the imm ecu & short the pin 4 & 13 for 30 min to sync imm ecu & engine ecu


How we will implement a procedure after waiting for 30 minutes.

[knok]

reset the imm ecu & short the pin 4 & 13 for 30 min to sync imm ecu & engine ecu

that?s the problem ... I don?t have dump for reset immo.
Immo I cannot reset from tester because I don?t have any master key
Or I don?t understand your explanation.

[shitad]

Toyota IT2 will now do it and the im_o is not easy to reach you will need different tool for this job.
SBB
T300 or
Toyota dongle

[shitad]

Toyota IT2 will now do it and the im_o is not easy to reach you will need different tool for this job.
SBB
T300 or
Toyota dongle


Toyota IT2 will NOT do it and the im_o is not easy to reach you will need different tool for this job.
SBB
T300 or
Toyota dongle

[cqae]

I did one of these the other day, you dont need dumps or anything like that.

Buy a new key from a dealer, there are pretty cheap, then you dont need to worry about if its a 4 c or 4d or anything like that, get a local locksmith to cut it for you then use one of those little orange toyota dongles that you can buy of ebay for about 30 bucks

dongle & key was only about 50-60 dollars & worked perfectly on my 08 yaris

[ashraf shaikh]

you need sbb prog or t300 to do this job done you can,t do on toyota it tester i it dosent have imm reset function

[cqae]

Im not quite sure what you are trying to say mate, but as I said, these can be done with the little toyota dongle & any new key as long as it is the right chip. I just recently did one so can 100% confirm it will work. the dongle will add a new key or add all new keys

[autopulse]

go for the orange dongle.. it will make your toyota immo work a breeze.. they dont always work with all immos cause theres a few bad quality copies out there but do some research on suppliers and go for someone that you know preferably.. however they are cheap enough now that they are worth the chance.. ((( i have the blue and the orange.. but oran ge is better (includes lexus and more toyota))) .. good luck

[knok]

Toyota IT2 will now do it and the im_o is not easy to reach you will need different tool for this job.
SBB
T300 or
Toyota dongle
I have T300 and I didn?t succeed with it...
Also I have buy 2 transponders 4D-67 and no one not registered to immo ..
Will try tommorow again.
Thank you guys !

[molotov]

Hi Knok

Try with AdPro or sent dump here !

I want help yau

regard
molotov

[electronicar]

Hi All , interesting thread , just curious , if i reset immo with T300 , can i use original 2nd hand keys that used to work with this Yaris before ? How to get the immo to accept it?

[mikeslocks]

tHE TRANSPONDER IS REUSEABLE, sorry caps is on the frits, reshell or use mechanical and hold next to barrel.

[ngakson2002]

read dump from the S93c66 chip and post it here with 4D transponder chip data i can provide help

[ghkarim]

Hi to all!
I?m looking for virgin contents of im*mo box fitted onto this car.
89780-0D011
( visteon )
inside 93C56


Please let me know what transponder is assign to this model.
Thank you , K

Hello,

can you help with location of immobilizer .

Thank you,

[joubliss]

Hello,

can you help with location of immobilizer .

Thank you,

in the middle behind the heating. so hard to find.

[topclef]

Here :top:

[bram380]

Model dates: 11/2005 - 10/2008
Matching models: KSP90L-CHMRKW
Model options: TRSTD, FRP, LHD, 1KRFE, MTM, 5F, 5D

[workdamnyou]

Remove the entire dash top and you'll see the loom running down to the immo box roughly from the centre of the dash. Dont try to pull the loom to get the box out as it runs through a few clips and around to where the connector on the box is.

Pull off as much of the heater assembly as you can, then stick an air wedge between the heater and the bulkhead. That gives you just enough room to get your fingers down to unclip the box from the back of the heater matrix.

I ~~~~ing hate these...