cyberdad
21st September, 2010, 11:32 AM
Hello I just wanted to share with you my solution to No CA error.
I had to change these settings in device manager > COM1 in order for dreamup to work with my DB800. It could not connect with any other settings
bits per second:115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: Xon/X off
I hope this will help anyone who cannot make dreamup to connect with the box
I had to change these settings in device manager > COM1 in order for dreamup to work with my DB800. It could not connect with any other settings
bits per second:115200
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: Xon/X off
I hope this will help anyone who cannot make dreamup to connect with the box