PIN code Audi A4 `00 magneti marelli

[malczykos]

Hi, my friend needs a PIN code from the Audi A4 , daschboard magneti marelli m73 d14.
Can anyone help with the calculation code.

Thanx

[wd bau]

try 6810 and replay if it work

[knok]

Hi, my friend needs a PIN code from the Audi A4 , daschboard magneti marelli m73 d14.
Can anyone help with the calculation code.

Thanx

login as you put in your file is (0)6810

[sroka]

hello please help me rade pin immo ****ing magneti marrelli m73 d14 read smok and vag tacho usb

[ivoo]

hello please help me rade pin immo ****ing magneti marrelli m73 d14 read smok and vag tacho usb
Pin is 09043

[marian.m]

Mileage 202369km + Pin code 9043

Regards

[sroka]

i'am trying code immo to vcds says code is wrong F***

[ivoo]

If you have previously entered the wrong code, you must turn on the ignition least 30 minutes and then insert the correct code.

[sroka]

:party :really need to wait 30 mintut, the code is ok thank you very much you are fantastic guys:party :

[marinescuv]

what software can extract the pin from dump MM M73?

[sroka]

smok ,vag tacho usb

[sroka]

hello please read immo pin for thi dump MM jeager 8d0 920 900h

read smok

[Bllinda]

try... 1039

[sroka]

i read vagtacho please look at that

[ivoo]

Try pin 7944

[sroka]

hello plase help me read immo pin from this dump thx magneti marrelli m73 8d0 920 900h

[haroutioun]

hello plase help me read immo pin from this dump thx magneti marrelli m73 8d0 920 900h
Hello.
PIN = 07760

[sroka]

hello please read immo pin for thi dump MM jeager 8d0 920 900

[koncimobil]

Pin code:
02315

[kiszka]

Hi, my friend needs a PIN code from the Audi A4 , daschboard magneti marelli m73 d14.
Can anyone help with the calculation code.

Thanx
test 01217 or 02959 if the error is reading the flash motorola

[Shmortz]

Pin code:
02315
confirm code 02315

[sroka]

02315 its good

[cundi77]

hello to everyone ...i am trying to change the old instrument cluster which is gone mad from an audi a4 b5 and i'm not sure what i have to read the old instrument cluster or the new one for retrieving the pin code ...and how i read to upload the dump here, i own a vag k+ can commander
thx in advance
m73 d51

[rafal]

use google and learn......................

[cundi77]

use google and learn......................
....thx .....my intention was to learn that's why I'm here, I've received help in the past here on the forum, it was good if I received a guide from someone ... but that's it, somehow I'll be able to do it if no one helps me ... thanks anyway:crushed:

[cundi77]

....I found a few guide elsewhere but they are very generalistic and misleading ....for me cause I'm a working as an accountant

[cundi77]

i found this on ross tech wiki....
Instrument Cluster Swapping

Prerequisites:



The new or used cluster is installed in the car.
Battery voltage at least 12.0 V.
All relevant coding and adaptation values have been transferred from the OLD (ORIGINAL) cluster to the REPLACEMENT (NEW or USED) cluster.

Immo 3 Audi vehicles typically use adaptation channels 060, 061 and 062 for the internal installation list since they do not have address 19-CAN Gateway. If in question, run a complete Adaptation Control Module Map (http://wiki.ross-tech.com/wiki/index.php/Control_Module_Maps) with the old module installed.
Immo 3 VW vehicles typically use short coding in address 19-CAN Gateway. If the original value is 00006, which is common, recode the new unit to the same value to refresh the internal gateway installation list.


Make sure to have BOTH PIN's, from the OLD (ORIGINAL) and the REPLACEMENT (NEW or USED) instrument cluster.
Make sure to have the Radio Code (for factory radios only).


[Select]
[17 - Instruments]


[Login - 11]
For the following procedure, use the PIN of the REPLACEMENT (NEW or USED) instrument cluster.



4-digit PIN

Enter zero followed by the 4-digit PIN directly in the Login field. For example, if your PIN is 1234, enter 01234.


[Do it!]


[Adaptation - 10]
Enter 050 in "Channel Number".
[Read]
For the following procedure, use the PIN of the OLD (ORIGINAL) instrument cluster.



4-digit PIN

Enter zero followed by the 4-digit PIN directly in the New Value field. For example, if your PIN is 1234, enter 01234.


[Test]



The values may change to "32000", this is normal

[Save]
[Done, Go Back]
[Close Controller, Go Back - 06]



Switch OFF the ignition and let the car sit for ~1 minute, then switch ON the ignition again.
Verify that the REPLACEMENT (NEW or USED) instrument cluster now shows the VIN/IMMO-ID of the vehicle now.

Now i have to buy Vag Tacho usb or FVDI abrites

[cundi77]

...thx for your kind help...
739508

[kiszka]

...thx for your kind help...
739508
if you don't share the eeprom reading with us
you will still work alone
we do not have access to your car's OBD
that the pin read is correct

[cundi77]

i accept your help ,i have no idea how to read te eeprom correctly to upload ...plus i have to uploud here bot dump the old clusters and the new one...thx in advance
i own -vag tacho usb 5.0
-vag k + can commander
i dont know which one to use to read eeprom???

[kiszka]

i accept your help ,i have no idea how to read te eeprom correctly to upload ...plus i have to uploud here bot dump the old clusters and the new one...thx in advance
i own -vag tacho usb 5.0
-vag k + can commander
i dont know which one to use to read eeprom???
vag can commander as direct

[cundi77]

thx in 739550advance for decrypt
739550739551:dancing:

[cundi77]

...sorry for the previous post my little daughter (almost 3 years) wants to play all the time with me :girlshoite:

[kiszka]

thx in 739550advance for decrypt
739550739551:dancing:
old >>> 04429 <<<
new >>> 03176 <<<

[cundi77]

....login code not accepted by controller .....

thx anyway for your patience ...and your precious time...

i started the car previosly with the new dash and i think ecm was disabled thats why cant communicate????????????

[cundi77]

... it's all like the car came out of the factory thanks to Kiszka

[looka]

Hi guys,


I want to adapt a key to the immobilizer of a 2001 TT 8N 1.8T with MM Jaeger M73 Cluster (8N1920880C) and read out the EEPROM with VAG+K CAN Commander.
Unfortunately I can't find the login pin code. Maybe you can help me, please?


I did the readout in Shadow 3 mode and also in direct mode. The ZIP with both files is attached.


Maybe you can also explain to me, how I can find it by myself the next time.
Would appreciate it.


Kind regards
looka

[looka]

Hi guys,


I want to adapt a key to the immobilizer of a 2001 TT 8N 1.8T with MM Jaeger M73 Cluster (8N1920880C) and read out the EEPROM with VAG+K CAN Commander.
Unfortunately I can't find the login pin code. Maybe you can help me, please?


I did the readout in Shadow 3 mode and also in direct mode. The ZIP with both files is attached.


Maybe you can also explain to me, how I can find it by myself the next time.
Would appreciate it.


Kind regards
looka


Got it. It is 7690.

[aslan123]

hello can somebody help me to have code pin Jaeger marenili

[rafal]

try 08216...................

[aslan123]

try 08216...................

wrong pin code , another maybe???

[Muntrial]

Hi there,

I needs a PIN code from the Audi A4 , daschboard magneti marelli m73 d15.
Can anyone help with the calculation code.



Thanks!

[miglins]

Hai I need HELP OF JEAGER M73 dash pin cod
txh..

[kiszka]

Hai I need HELP OF JEAGER M73 dash pin cod
txh..

>>>> 1042 <<<<

[miglins]

In the EEPROM need search for the Immobilizer number. If the immobilizer number is found, then the login is the two bytes preceeding the immobilizer number. Can anyone confirm this?

[kiszka]

In the EEPROM need search for the Immobilizer number. If the immobilizer number is found, then the login is the two bytes preceeding the immobilizer number. Can anyone confirm this?

I confirm that there is no other way for a different Pin to be
only the one I gave 01042

[miglins]

Last time i will wait 255 min for Cluster Lock Time.
if password will bee not correct
i will smesh and burn thet shit....

Thx for helping.

[kiszka]

Last time i will wait 255 min for Cluster Lock Time.
if password will bee not correct
i will smesh and burn thet shit....

Thx for helping.

there is no other pin
there may be a problem with your job but I don't know that anymore

[run4fun]

Hello,
Is it possible to help me with immo pin from the attached dump. Audi TT MK1. I need this in order to pair a second key.
Thank you!

[Domi]

Hello,
Is it possible to help me with immo pin from the attached dump. Audi TT MK1. I need this in order to pair a second key.
Thank you!

post eeprom not flash

[run4fun]

I used Vag Can+K Commander and selected Magneti Marelli Direct. I used "Read" not "Read ROM/Flash". Not sure why it seems to be flash.

[Solymosb]

hello,

I tried to get immo pin from a4 '00 jaeger (marelli) cluster, but i couln't that. :( I attached the bin file, which was read by VAG commander (marelli direct).

Could you please help me to get the login code?

Thank you.

[kiszka]

hello,

I tried to get immo pin from a4 '00 jaeger (marelli) cluster, but i couln't that. :( I attached the bin file, which was read by VAG commander (marelli direct).

Could you please help me to get the login code?

Thank you.
>>> 07669 <<<

[Solymosb]

thank you Sir :)