View Full Version : help altea 1.9 wont start after tuning
el_futte
25th September, 2010, 03:14 PM
i have a guy there have try 2 tune his altea 1.9PD 105hp
afther the read out he sent the file to a tuner
and flash the ecu . now the car cant start.
he tryed to put the old file in but nothings works whit the
he have use a AVDI PC USB Interface
the ecu is a bosch 0 281 013 282 edc16u34
ipejasinovic
25th September, 2010, 04:31 PM
For that sort of things, you should use Flasher, not Diagnostic tool! Now, you probably locked ecu with wrong writing or wrong checksum.
el_futte
25th September, 2010, 04:36 PM
yes it is not i there have done the tuning here . im just try 2 help him.
but yes somthing is very bad whit this cabel here.
edc
25th September, 2010, 05:23 PM
looks like BDM will solve this problem ...
rappttor
25th September, 2010, 05:27 PM
can you log on to the ecu with vcds?do you have any dtc on the engine and IC or immo module?
i had a similar problme with an O2 face lift, same ecu...the soft was ok, but it didnt start anymore...
give all the details about the car and engine....
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.