PDA

View Full Version : Kangoo 29F200 sirius replace eprom in another but....



dof
28th September, 2010, 09:54 AM
Hi everybody,
I replace the 29F200 from old ECU to new ECU because the old have board defective on his power.
First,the car start correctly friday and now on monday, it don't wan't start, cylinder are plenty of fuel and no sparkles.
There is light on board from old default since friday and now, always the same but with no start
Please help me
Dof

ppeyup
29th September, 2010, 06:32 PM
Hi everybody,
I replace the 29F200 from old ECU to new ECU because the old have board defective on his power.
First,the car start correctly friday and now on monday, it don't wan't start, cylinder are plenty of fuel and no sparkles.
There is light on board from old default since friday and now, always the same but with no start
Please help me
Dof
hi,
If you move it from the 25,080 former ECU

ppeyup
29th September, 2010, 06:33 PM
If you move it from the 25,080 former ECU

ppeyup
29th September, 2010, 06:47 PM
was the wrong answer so I apologize, mixed with diesel

dof
30th September, 2010, 09:54 AM
It cool from you to participate to my problem, so is the only memory in this ECU ?
Thanks !!

dof
7th October, 2010, 12:42 PM
All Right! it was the coil who is in short circuit...
Kangoo is done now...
Bests regards @ all