Fiat Flashing Odometer

[GSXR1000]

Hi Anyone know how to stop mileage flashing after new dash on fiat Stilo, called a proxy re-alignment I think.
I have X-431 can't seem to do it with that any ideas or is it a Fiat Job.

Thank's

[yellowstilo]

yes, it has to be done with the Fiat Examiner tool, maybe some other high-end testers can do it too.

[RSwire]

Wrong section guys, this is the commercial/industral section. Thanks.:motz:

[CarMirek]

Hello
you must set up CAN network in car again and it should be ok.

CarMirek

[marsian]

I know Texa and brainbee can make proxy allingment too.problem occurs when vehicle need canbus setup as Carmitec said

[David C]

Looks like the next release of FiatECUScan will be able to do CAN proxy alignment with an ELM interface.

[MBVR6]

Hello

I have acces to a Fiat Examiner tool thru a friend.
Can somebody tell me how to do a proxy allingment, to lett the dash stop flashing???

Thanks in advance.

[Claudiu_dar]

I made some time ago something like this.For stoping the flashing I edited the VIN number in the new instrument cluster.
Please post both dumps from 912 from your instrument clusters.

[MBVR6]

Hello

I did not changed the instrument cluster.
I only changed the engine ecu, it was faulty.
Commen problem like misfire, only running on 3 cylinders.

[yellowstilo]

Hello

I did not changed the instrument cluster.
I only changed the engine ecu, it was faulty.
Commen problem like misfire, only running on 3 cylinders.


for changing the engine ecu for a new one you won't need a proxy procedure.
A used ecu can't be used without making it virgin first, after that it won't need a proxy procedure either.

[tsubby]

Hello

I did not changed the instrument cluster.
I only changed the engine ecu, it was faulty.
Commen problem like misfire, only running on 3 cylinders.
What is flashing on the instrument cluster?

Odometer or the engine fault warning lamp?

[MBVR6]

Hello

Thanks guys for the responces.
After the orginal ecu broke down.

I bought a second hand set of locks with keys incl the immo box and fusebox.

Thats why i need to do a proxy allingment, i think.

Because when i did the swap, the odometer started with flashing, erverything is working correctly only the flashing of the display section is flashing.

Thanks in advance

[tsubby]

So you didn't change the cluster but is the same thing: the Body Computer and the instrument cluster has different coding.
So you need to perform the proxi alignment.
If you have Examiner, you can do it without problems.
If you enter into the specific car/model ECU test, there are the list of ECU-s, and there is "Proxi alignment procedure". Select it, and afterwards everything is self explanatory.

[MBVR6]

Ones again thanks for the reply.

As soon as i have the time i will try it.
Thanks