PDA

View Full Version : EVC BDM100 Original



valty
9th October, 2010, 02:33 PM
Hello All

I have Original bdm100 to evc .

This bdm , Read and writte only flash external or eporm external

- I have soft bdm to go v. 1.810 , but only read and writte all , not possible , read or writte only flash external sample

Please Help me

Thanks.

chli1976
9th October, 2010, 06:23 PM
You must read it with WinOLS

rsibiza
13th October, 2010, 08:35 AM
But it doesnt work with cracked winols..i uses also original EVC BDM100 with BDMtoGo..not real good as you get a cripted file:motz:....


Could be interestening how to get it working on cracked WinOls..or get WinOls 1.8 cracked..and working with it:hmmmm2:

tehnosoftex
13th October, 2010, 07:42 PM
But it doesnt work with cracked winols..i uses also original EVC BDM100 with BDMtoGo..not real good as you get a cripted file:motz:....


Could be interestening how to get it working on cracked WinOls..or get WinOls 1.8 cracked..and working with it:hmmmm2:

But it work with cracked winols I have bdm100 original and I install the last bdmtogo software which install the drivers for bdmtogo. After that I open cracked winols and I have full control of bdm100. I can read write and save as bdmtogo or as binary.

rappttor
13th October, 2010, 07:51 PM
that's a verry interesting news ....:hmmmm2:

masterb
13th October, 2010, 08:01 PM
But it work with cracked winols I have bdm100 original and I install the last bdmtogo software which install the drivers for bdmtogo. After that I open cracked winols and I have full control of bdm100. I can read write and save as bdmtogo or as binary.

thats true ... but it depent on your firmware in the bdm100.
I think, with newer firmware .. stop working !!

valty
17th October, 2010, 07:06 PM
Hello again.

i install vinols 1.5 this page , and bdm original work fine , read ok,

- Only have problem, thsi winols for me have problem checsum ..
Have sample this error .

he plugin OLS220_Bosch_V31.dll (03/10/2007) could not be loaded, since it uses an obsolete interface or is corrupted in general. Please update it.

- its posible recalcualte checsum this crak version.

thanks.

rsibiza
17th October, 2010, 09:30 PM
thats true ... but it depent on your firmware in the bdm100.
I think, with newer firmware .. stop working !!


I have old FW ON MY BDM100...its about 5 yeaes old now and as i am no official tuner EVC wont do update FW for me.

I use also cracked winols but bdm never showed in hardware...:'(

tehnosoftex
17th October, 2010, 11:08 PM
Then try to install last bdmtogo software and try again with winols

KANG SUNG
28th October, 2010, 06:05 AM
Download BdmToGo (http://www.evc.de/en/download/down_bdmtogo.asp)

rsibiza
17th November, 2010, 09:23 AM
Then try to install last bdmtogo software and try again with winols


I reinstalled mz windows XP system,and all soft on my pc...
reinstalled WinOls running fine 1.5...
reinstall your BDMtoGo posted...connect bdm to ecu...power up..

In WinOls i can get data about serial number from BDM100...but still unable read or write flash or eprom...:sleep: