DAS Fault (1.2) 2.503.13003 PLS Help

[battle77]

I Have Original Compact 2 with T30 and Original Multiplexer. I Only upgrade from 03/2010 tp 07/2010 all is OK, but i cannot connect because i get everytime i try to connect to my car these error:

http://www.abload.de/thumb/unbenanntwa77.png (http://www.abload.de/image.php?img=unbenanntwa77.png)

CAESARTEST:

CAESAR STOS+ Rev.:2.10 from Mar 11 2004
generated protocol file from 31.07.2010 16:01
SystemCheck :
Check serial ... 0 Ok
CAESAR HW Detection :
D2Access ... 0 Ok
D2DownLoad ... 0 Ok

CAESAR Part D2 detected on COM2 with baudrate: 19200
CAESAR version check :
D2CheckSNVER ... 0 Ok
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial Number **** i delete ...

Authorization Level 3
Part D
Hardware Authentification 011200
Hardware Date 021102
Special EEPROM check :
D2 Special EEPROM check:
Inst. date registered ... 0 Ok
D2 Special CAN Test :
Special Test ... 0 Ok
CAESAR version check :
D2CheckSNVER ... 0 Ok
User is Daimler-Benz AG
User Authentification 1
Classification 0
Serial Number **** i delete ...
Authorization Level 3
Part D
Hardware Authentification 011200
Hardware Date 021102
Slave check :
D2 Slave check
D2 Processor ... 0 Ok C165 (mask step CA) is mounted.
D2 RAM ... 0 Ok
D2 FLASH ... 0 Ok
D2 EEPROM ... 0 Ok
D2 SERCTL1 ... 0 Ok
D2 UART1/2 ... 0 Ok
D2 ADC ... 0 Ok
D2 Display Power Supply :
D2 Power Battery ... Voltage KL30 = 13.5 V
D2 Power Ignition ... Voltage KL15 = 13.6 V
D2 Voltage K-Lines :
D2 State K-Lines (35) ... Total 4 (+), 31 (-)


I dont know because i dont remember if i use the Cal872 fix.

If yes did i have to cancel it ?

If Yes how i do it ?

Or did i need the Cal872 fix ?

I Have a full Original System from Mercedes, i dont need the Cal872 fix or ?


Pls help me, did i forget anything to do or what is wrong ?

Thanks A Lot

[DB_member]

Sounds like you have applied those DAS fixes that are intended for earlier versions. Try to use the original C32S.DLL file, don't replace it with one of those that come with the DAS fixes for the older versions.

[battle77]

thanks a lot i think you are right i replace the C32S.DLL and the cal.ini file.

I cannot find the two Original Files and i dont wanna install DAS again, can anybody help me ?

Pls, send me the Original and unmodified Files "C32S.DLL and the cal.ini" from DAS 07/2010

Thanks a lot

[Patrian]

Pls, send me the Original and unmodified Files "C32S.DLL and the cal.ini" from DAS 07/2010

Thanks a lot

Here you are..... :)

Regards!

[battle77]

THANKS A LOT Patrian

best regards from Germany ... :wavey:

[jnp1908]

Battle - did this reversal and use of the original files donated solve the issue for you ?

[izi]

HI all

I have same problem (2.503.13003) but it's for the das 09/2010

I need C32s.dll and cal.ini for this das 09/2010

thanks


izi

[zsolty_szasz]

Hey guys,

Next time trie to use the newer version of Zoolokas guide for DAS installation. No problem at all to me.

[milkatrek]

i have that same problem.
Someone help 11.2010

[DB_member]

i have that same problem.
Someone help 11.2010

You mean you need the c32s.dll for 11/2010?

[ALEKOS]

hallo.i need c32s.dll and cal.ini for 11-2009.thanks

[DB_member]

hallo.i need c32s.dll and cal.ini for 11-2009.thanks

What's wrong with your c32s.dll? Did you delete your original file?

The cal.ini file you should be able to fix yourself (or post your file and you'll get it back with modifications).

[gilberto93]

hello I have the same problem is what it always works to roof

[gilberto93]

merci a db member

[DB_member]

hello I have the same problem is what it always works to roof

Do you mean you have deleted your original C32s.dll file? Which DAS release are you using? I'm afraid I would not have this file for the 09/2010 readily available (unless it happened to be the same as on 07 or some later releases).

Considering the cal.ini file, typically it would be sufficient to set the platform to D2 like this:
PLATFORM=PART_D2

[ddam81]

I have the same problem with 01.2012. Which version I need??

Thank you

[Auto Clinic]

I need C32s.dll and cal.ini for this das 01/2012

DAS Fault (1.2) 2.503.13003

[Auto Clinic]

I need C32s.dll and cal.ini for this das 01/2012

DAS Fault (1.2) 2.503.13003


my problem solved

[LX24]

Hallo

I have the same Problem "DAS Fault (1.2) 2.503.13003" with DAS 03/2012 !!
Can anybody help me please with the c32s.dll and cal.ini ?

:top::top:

[worldbenz2010]

need C32s.dll and cal.ini for this das 03/2012

DAS Fault (1.2) 2.503.13003

[coolis]

need C32s.dll and cal.ini for this das 03/2012

DAS Fault (1.2) 2.503.13003

I have same problem... Any help?

[BigDen]

I have 503.13003 on 012012
need help