Peugeot 206 1.4 lt 95160 chip

[magnacin]

Hello,
I would like to ask for a little help here. I have a 2009 Peugeot 206 1.4lt engine with Sagem S2000 ECU with the only difference that instead of a 95080 eeprom (which immo can be removed with immo killer) it has a 95160 eeprom and I dont have software to remove immo or know if its possible to remove immo.
Can someone please help me providing immo off dump for this ecu or virgin dump in order to program again?
Thanks in advance for your help.
Enclosed are 2 files of different ECUs with same eeprom 95160.
Thanks.

[chacarita]

this is a virgin dump you need pp2000 for reset

[magnacin]

Thanks but I think it is a virgin dump for a 95080 (it is a 1k size file and 95160 is a 2k size).

[cfgebel]

Enclosed are 2 files of different ECUs with same eeprom 95160.
Thanks

try this

[magnacin]

I will try both and advise results

[dgmcan]

Hi!

Try this file, It maybe only be virgin, not immo-off.

[magnacin]

Thanks to all for your help and interest. I have managed to immo off this file.
Here it is 100% working and tested for anyone that finds it usefull.

[antlio]

Hi

If i will use your file it will needs to cut pins from ecu or not and if it will must cut which pin i will must cut ?

thanks

[magnacin]

Yes you still need to cut pins. Sorry I forgot to mention.

[antlio]

Ηι

which pins you cut from this ecu ?

regards

[racin-snake]

f3 and f4 middle row ..for future reference

[busaman]

does anyone have the location of the eprom its not in the usual place.

[dgmcan]

May be here!

For de JCI Ecu, the location is other.

[busaman]

after a big of digging i think this one maybe.

[busaman]

Hello,
I would like to ask for a little help here. I have a 2009 Peugeot 206 1.4lt engine with Sagem S2000 ECU with the only difference that instead of a 95080 eeprom (which immo can be removed with immo killer) it has a 95160 eeprom and I dont have software to remove immo or know if its possible to remove immo.
Can someone please help me providing immo off dump for this ecu or virgin dump in order to program again?
Thanks in advance for your help.
Enclosed are 2 files of different ECUs with same eeprom 95160.
Thanks.


Where was the location of the immo chip on this ecu.

[magnacin]

I am really not sure. I run the Immo off algorithm and it cleared the eeprom. I just filled the rest of the memory.

[busaman]

I am really not sure. I run the Immo off algorithm and it cleared the eeprom. I just filled the rest of the memory.

can you explain please what i mean is did you actually locate the immo chip because the JCI pic is in a different place on the one i have here and when i read the ori it was all ff except for the last line all 00

or did you immo off via obd.

[magnacin]

Yes i did locate the immo chip. I thought it was located on a position similar to the pictures here but it is not so I had to remove most part of the gel until I located. Let me take some pictures of the location and I will post them here later. I just need to get a good camera.
As for the ori file its not just FF. probably there was a error while reading.
Here is a clear 100% working file.

[chacarita]

Ther are two possible memories 95080 or 95160

[busaman]

Ther are two possible memories 95080 or 95160


that is correct i found this it may be helpfull this is the one i have just found.


YouTube - ECU Xsara y 206 1.4 SAGEM 2000

[antioqueno]

hello

i not write the 95160 with x-pro you said me with programmer for write this chip

thanks

[busaman]

i used the wellon vp480 and it works fine.

[magnacin]

I use GQ 4X and works also fine.

[busaman]

is there another immo off for this eprom 95160 i have loaded twice with a new eprom and only revs to 3000rpm with ecu faults unless ecu is from a newer car.

[dgmcan]

is there another immo off for this eprom 95160 i have loaded twice with a new eprom and only revs to 3000rpm with ecu faults unless ecu is from a newer car.

I think it will fix with a Telecode with Lexia Diagnose Tool.