View Full Version : ImoDAS + ECU for ML 270
dikseln
14th October, 2010, 12:50 AM
Hi,
I lost the eeprom of imobox of W163 270CDI with following:
Engine ECU
A612 153 17 79
0 281 010 546
EEPROM is SP08
Flash 29F800
Immo (insered in EAM)
A 163 545 28 32
Mask 1D69J
and need the dump for this car, after program the new keys.
Anybody have there dumps?
many Thanks
vanos batam
14th October, 2010, 12:54 AM
hi. your dump
dikseln
20th October, 2010, 08:48 AM
Hi Vanos,
the ecu file SP08 is not to 3FF but limited to FF address. Can you verify please?
vanos batam
20th October, 2010, 09:20 AM
Hi Vanos,
the ecu file SP08 is not to 3FF but limited to FF address. Can you verify please?
write by X prog
ak400. need coding with star.
dash must og47v
dikseln
20th October, 2010, 02:26 PM
Hi Vanos,
maybe we don't understand.
The FBS internally of EAM is burned and I have another used and the uP is 0G47J
The engine ecu is CR2 Bosch 0281010546 and the EEPROM is
SP08, so, have 1024Byte data from 0 to 3FF, but your file is 256byte from 0 to FF. The data from FF to 3FF are ??
Another question
the file 0G47J is for DASHBoard or for FBS ?
I remember that car is after 2000 with EAM system.
Thanks
Again
vanos batam
20th October, 2010, 02:40 PM
eam ml 2000.
YOU CAN USE 1D69J.
THE DUMP IS WORKING 1000%
write to your das.(vanos ok)
then coding with diagnosis
dikseln
21st October, 2010, 12:48 PM
Hi Vanos,
can you get me the pwd in PM please?
Thanks
antioqueno
26th October, 2010, 02:54 AM
Hi Vanos,
can you get me the pwd in PM please?
Thanks
daniel sg
26th October, 2010, 12:40 PM
Hello vanos..
Give me pass in PM.
Regadr
icogsm
13th October, 2011, 09:30 AM
pass pass passs pass!!!
B.R.
flaviu_syzu
28th October, 2015, 11:50 PM
thanks i will try!!!
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.