W204 C-Class Transmission module password

[dragomirg]

Hi folks,

Here is a small solution how to access the "Correction programming" menu of the ETC control module in C-Class W204 in DAS. I found out that DAS uses .cnt files as configuration files for the menus it displays. In these .cnt files it is described what action to take if the password is correct. I have changed this .cnt file to help DAS always take the correct path ;) . I tested this and it works even if I don't enter anything for the password. The only time it does not work is if I enter a correct password, hehe.
In order to use it you must change the file "codier.cnt" in the location, which is specified in the text file. Please, note that this file may be different for the different versions of DAS - I have included the original file also so that you can see what is the difference.

I am pretty sure a similar solution will work for the other units - Airbag, Air conditioner, etc. I will try to find a solution for them as well when I find some more time. If anyone is interested I'll be happy to work together to achieve this.

[armpower]

Very good job mate.

Thanks

[impactops]

The thing i find interesting with w204 passwords is that people seem to come up with only this model for a solution.A correct DAS key should not produce passwords on the w204 model on most of the special function screens.Without using the mod, i do not get a password screen for the transmission.So for those who have a password screen for w204 and was given a das key by a member on this forum look back to see who it was & you will see a pattern emerging.At the beginning i got suckered into this trap until i realised what was going on.I suggest for those people make another request so that some of those w204 passwords don't appear if you dont want to use the mod.

As for the mod itself there are a hell of alot of cnt files you will be altering to bypass passwords.The fact that this particular one was used when the other file names are not difficult to work out would mean that it only works on w204

[dragomirg]

The thing i find interesting with w204 passwords is that people seem to come up with only this model for a solution.A correct DAS key should not produce passwords on the w204 model on most of the special function screens.Without using the mod, i do not get a password screen for the transmission.So for those who have a password screen for w204 and was given a das key by a member on this forum look back to see who it was & you will see a pattern emerging.At the beginning i got suckered into this trap until i realised what was going on.I suggest for those people make another request so that some of those w204 passwords don't appear if you dont want to use the mod.

As for the mod itself there are a hell of alot of cnt files you will be altering to bypass passwords.The fact that this particular one was used when the other file names are not difficult to work out would mean that it only works on w204

Yes, all that you have written is true.
For some reason all the generators I have seen don't support the license for using W204 without a password. Modifying the cnt files is not the best solution. So, I am going to request a new key for my DAS installations (all 4 of them ;) ).
Cheers!

[impactops]

Yes, all that you have written is true.
For some reason all the generators I have seen don't support the license for using W204 without a password. Modifying the cnt files is not the best solution. So, I am going to request a new key for my DAS installations (all 4 of them ;) ).
Cheers!

I believe that they can all be removed by the key, but my solution will consist of replacing the exe file which has the password screen removed.All the special function screens (accept for the transmission) are done by the same routine.So by removing one they all get removed.

Regards
Impactops

[duguqiubai]

Hi folks,

Here is a small solution how to access the "Correction programming" menu of the ETC control module in C-Class W204 in DAS. I found out that DAS uses .cnt files as configuration files for the menus it displays. In these .cnt files it is described what action to take if the password is correct. I have changed this .cnt file to help DAS always take the correct path ;) . I tested this and it works even if I don't enter anything for the password. The only time it does not work is if I enter a correct password, hehe.
In order to use it you must change the file "codier.cnt" in the location, which is specified in the text file. Please, note that this file may be different for the different versions of DAS - I have included the original file also so that you can see what is the difference.

I am pretty sure a similar solution will work for the other units - Airbag, Air conditioner, etc. I will try to find a solution for them as well when I find some more time. If anyone is interested I'll be happy to work together to achieve this.
Thanks!!! Fault (1.17)-7.870 ;(2.27_-7.870 error fix ?

[duguqiubai]

Hi folks,

I am pretty sure a similar solution will work for the other units - Airbag, Air conditioner, etc. I will try to find a solution for them as well when I find some more time. If anyone is interested I'll be happy to work together to achieve this.
look!!:wavey::congrats:

KEYGEN DELETED BY ADMIN AS IT IS AGAINST FORUM RULES

[snelle rabbit]

hi,

i have tried somethink like this. a little time ago.
i have changed the .cnt file to activate the dvd and tv while driving for the 221 and 204 models.
at the end i give up, i had changed a lot of things but wont work.
i found files to change, so it worked in das sim. but if i change the same in the file for das(real) the program executes because in dasrs232.exe there is a checksum.
maybe there is some one who knows how to bypass this checksum.

greetings.:wavey:


Hi folks,

Here is a small solution how to access the "Correction programming" menu of the ETC control module in C-Class W204 in DAS. I found out that DAS uses .cnt files as configuration files for the menus it displays. In these .cnt files it is described what action to take if the password is correct. I have changed this .cnt file to help DAS always take the correct path ;) . I tested this and it works even if I don't enter anything for the password. The only time it does not work is if I enter a correct password, hehe.
In order to use it you must change the file "codier.cnt" in the location, which is specified in the text file. Please, note that this file may be different for the different versions of DAS - I have included the original file also so that you can see what is the difference.

I am pretty sure a similar solution will work for the other units - Airbag, Air conditioner, etc. I will try to find a solution for them as well when I find some more time. If anyone is interested I'll be happy to work together to achieve this.

[caveman_nige]

Are these keygens?

[Qrius]

Yes it is a keygen ! (the icab)

[impactops]

Are these keygens?

I belive it is, it has been posted once before & was removed

Regards
Impactops

[nguyennhatquang]

so, MR impactop... would u please share for us the exe files, what will remove all special setting in DAS..
thank you in advance.

[gmb45]

it generates codes m8, ive just downloaded it but im not sure if its allowed try it m8

[dragomirg]

hi,

i have tried somethink like this. a little time ago.
i have changed the .cnt file to activate the dvd and tv while driving for the 221 and 204 models.
at the end i give up, i had changed a lot of things but wont work.
i found files to change, so it worked in das sim. but if i change the same in the file for das(real) the program executes because in dasrs232.exe there is a checksum.
maybe there is some one who knows how to bypass this checksum.

greetings.:wavey:

I don't think there is a checksum, because for my cnt it worked. If you wish you can attach your modified files and some of the clever people here may find a solution.

[snelle rabbit]

I don't think there is a checksum, because for my cnt it worked. If you wish you can attach your modified files and some of the clever people here may find a solution.


in the beginning i changed the .cnt file
but this has no result, so i start searching and find .sim files.
these contains the text that appear in the das menus. (these text menus where picked up by the .cnt file) you can change these .sim files and in das the text in the menus changed . but if you change the file for dasrs232(real)
das hangs and execute because there is a checksum.
these last file i changed was a .cbf file.

:hmmmm2:

you are right about the .cnt file
can change without problems.

[caveman_nige]

Do not post keygens on this forum it is against forums rules.

Please read the rules carefully before posting again..

http://www.digital-kaos.co.uk/forums/f5/forum-rules-2/

[mercedesUSA]

Are you all meaning the ability to acess the 204 from Das instead of Xentry or am i missing something?

[Madaxl]

Where can i find the Keygen (icab)
Please PN.

@mercedesUSA

we search a solution for all passwords protection on DAS

[weryo]

Icab is good for some systems,but it has not got an option for dpf regeneration

[mercis]

Where can i find the Keygen (icab)
Please PN.

@mercedesUSA

we search a solution for all passwords protection on DAS
i have "icab"work only with old DAS

[wissoaj]

hi dragomirg could you please specify more what did you change in this file cause i opened both files original and edited version with notepad and i didnt find any differences if you could please direct us in the right direction and we could all put our hands together and remove the passwords in other special settings

[wsc]

I don't think there is a checksum, because for my cnt it worked. If you wish you can attach your modified files and some of the clever people here may find a solution.

I am glad that you help people here my friend Drago

PS:We will tolk monday morning

[mercedesUSA]

here is what i use to acess 204 in Das, still gives errors that password is reqiured, but allows to open. would be nice to be able to remove the warning. if you find this useful blease be thankful

http://www.rapidshare.com/files/425281655/204PasswordRemover.rar

[wissoaj]

here is what i use to acess 204 in Das, still gives errors that password is reqiured, but allows to open. would be nice to be able to remove the warning. if you find this useful blease be thankful

http://www.rapidshare.com/files/425281655/204PasswordRemover.rar

dear mr mercedesusa i couldnt download the file cause it says that download limit reached but thanks for help anyway

[mercedesUSA]

dear mr mercedesusa i couldnt download the file cause it says that download limit reached but thanks for help anyway

this account should not have limit, worked fine when i just tried

[wissoaj]

this account should not have limit, worked fine when i just tried


dear m8 on wich version of das does this works or does it work on all versions?

[mercedesUSA]

dear m8 on wich version of das does this works or does it work on all versions?

i have recently tried it on 09/2010 and it worked

[Patrian]

dear m8 on wich version of das does this works or does it work on all versions?

From DAS Version 7.2010 and ABOVE, Daimler she Unlocked W204 Diagnose via DAS and you did not need any Special file!!! ;)
EVEN if you still watching the Warning about this... :)

The protection about W204 in DAS, was existed for to "Learning" the Dealers the Xentry S/W... ;)

Regards!

[mercedesUSA]

From DAS Version 7.2010 and ABOVE, Daimler she Unlocked W204 Diagnose via DAS and you did not need any Special file!!! ;)
EVEN if you still watching the Warning about this... :)

The protection about W204 in DAS, was existed for to "Learning" the Dealers the Xentry S/W... ;)

Regards!

i never actually tried 204 on car before i entered file, but did try in sim and was locked.

[DB_member]

i never actually tried 204 on car before i entered file, but did try in sim and was locked.

But did you try an 07/2010 version or a later one? I can remember the password query but when I tried my current version (in simulation mode), I had trouble finding a password query anywhere. Which control units would have the password protected special functions menu?

[snelle rabbit]

Hi folks,

Here is a small solution how to access the "Correction programming" menu of the ETC control module in C-Class W204 in DAS. I found out that DAS uses .cnt files as configuration files for the menus it displays. In these .cnt files it is described what action to take if the password is correct. I have changed this .cnt file to help DAS always take the correct path ;) . I tested this and it works even if I don't enter anything for the password. The only time it does not work is if I enter a correct password, hehe.
In order to use it you must change the file "codier.cnt" in the location, which is specified in the text file. Please, note that this file may be different for the different versions of DAS - I have included the original file also so that you can see what is the difference.

I am pretty sure a similar solution will work for the other units - Airbag, Air conditioner, etc. I will try to find a solution for them as well when I find some more time. If anyone is interested I'll be happy to work together to achieve this.



can you please explain where in the .cnt file you changed something? witch line nr. maybe?

greetings:hmmmm2:

[andrey3]

hi!
Try this file to access the "Correction programming" menu of the ETC control module in C-Class W204 and in E-Class W211 in DAS
without pass
I tested this and it works for me

test please
this (codier.cnt) file is modified
(codier_or.cnt) - original

compare them to see the difference
!!!!Do not forget to keep your fail to change!!!!

[euror]

Thanks but as of 05/2010 correction programming doesn't need any password. But we still thanks for your great effort!

[dragomirg]

This was my original intention - whenever someone needs to enter a password and finds how to modify the cnt file - just to post the solution here, so that everyone can benefit.
I found that these passwords work in Simulation mode too. In fact I tried to fix some files to unlock the adaptations for Airbag in W164 ML, but so far I have no success.

[pesona]

hi!
Try this file to access the "Correction programming" menu of the ETC control module in C-Class W204 and in E-Class W211 in DAS
without pass
I tested this and it works for me

test please
this (codier.cnt) file is modified
(codier_or.cnt) - original

compare them to see the difference
!!!!Do not forget to keep your fail to change!!!!

I compare your file with the one from dragomirg, it's almost the same except one line:

4738 6 0 1 1 i_stringlen == I:0 EXPR

So I assume your file is repairing the dragomirg one.

:congrats:

[andrey3]

yes
I corrected on the basis of its file
I do not pretend it was me create one