Ecu Audi A6 2.5 tdi flash

[kusasusa]

Someone has something changed in a flash chips, and now we need the original flash chip for both, I think it was implemented modifikacion ecu.

The ECU has two flash and then it would have to know which flash where to enter dump.

ecu :0 281 001 833
4B0 907 401 E

Thanks in advance!

Kusasusa

[rappttor]

here you go..

[kusasusa]

Thanks a lot my friend!

I dont know which position on a pbc is 706 and 707.

BR

Kusasusa

[rappttor]

something like this :))
this ones are already changed, yours will be without soket if they are stock...

[kusasusa]

All of my Rappttor it out, but I do not know which positions flash first, this left first the position is 706??


BR
Kusasusa

[rappttor]

you only have 2 posibilities :))

[roth18]

On Mercedes diesel the higher number is on the outside. Audi might be similar as they are both made by Bosch. BTW you can get cheap PLCC32 sockets here (http://www.mcumall.com/comersus/store/comersus_viewItem.asp?idProduct=4389). This will save you the "fun" of desoldering and soldering PLCC32s.

[sjonv]

HHH is on the left, but if you replaced it wrong nothing wil happen.

tryed it before..



you can also compare 1 chip with an ori file...

[edc]

HHH is on the left, but if you replaced it wrong nothing wil happen.



the car won't start ... ;)

[kusasusa]

A car start , but for cca 10sec flashing light for pre-heating.

BR

[sjonv]

A car start , but for cca 10sec flashing light for pre-heating.

BR


what dtc you get?