View Full Version : ford ranger with 9s12h128, as I have in 0km
km-digital
16th October, 2010, 12:34 PM
as stated by tachosoft 0km = 0006
but remain at 96 km
You can leave 0km
0000=error(display)
00ff=error
0001 - 0002 - 0005 =error
thanks for information
drpeter
16th October, 2010, 01:00 PM
as stated by tachosoft 0km = 0006
but remain at 96 km
You can leave 0km
0000=error(display)
00ff=error
0001 - 0002 - 0005 =error
thanks for information
Ford mileage can not be lower then 128 km, 127 = HEX 0006 128km = HEX 11
Mileage is km devided /128 + byte from table.
km-digital
16th October, 2010, 03:01 PM
there is no way to put okm
and begins when 0km
Apolo29
16th October, 2010, 03:11 PM
there?s a way, to read a 0 km dashboard.
Has someone done that? i have one with 33km, if you need it i post it, at least i will be closer.
Ramzai
16th October, 2010, 04:12 PM
Ford mileage can not be lower then 128 km
Can. 0006 - "big circle". Is also "a small circle".
tachonow
16th October, 2010, 04:54 PM
Can. 0006 - "big circle". Is also "a small circle".
You are right mate. The solution is visible in the small circle.
km-digital
16th October, 2010, 06:47 PM
Has someone done that? i have one with 33km, if you need it i post it, at least i will be closer
if I use
thanks, I can post
taihei
16th October, 2010, 06:54 PM
there?s a way, to read a 0 km dashboard.
Has someone done that? i have one with 33km, if you need it i post it, at least i will be closer.
Hi
I need that 33 Km dump...post it please. Thank You.
Apolo29
18th October, 2010, 12:44 PM
I`ve posted, hope you can use it my friend.
Ramzai
18th October, 2010, 02:22 PM
I`ve posted, hope you can use it my friend.
All is correct - 33км! :)
Apolo29
18th October, 2010, 03:02 PM
How can you calculate the distance??
Ramzai
18th October, 2010, 03:09 PM
How can you calculate the distance??
I know algorithm. :rangers:
km-digital
19th October, 2010, 01:34 AM
thank you very much, apolo
33km runs
I appreciate your help
guillermoc
2nd December, 2010, 03:12 AM
I know algorithm. :rangers:
Hello, you know pinout to program km in board Ranger Mercosur using Goldbox v1.54?:eek:
Hardware
10th December, 2010, 03:50 AM
Try mileage 0006 ff80 repeating. each speed pulse from speed sensor in transmission increments data in eeprom. 2nd word stores this information. If you don"t know full algorithm you can only change 1st word = 128km approx which most calculators do.
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.