KW A750 iConnector Firmware

[akhlaq768]

Having the original KV A750, i've just got myself the blank iconnector without the router dongle as i can connect the box straight to the router...

Firstly can someone post a link to the Firmware required for the A750 to work with the iConnector? (Can't seem to find it on this forum)

Secondly is there anything else I need to know with this setup?

Thanks

[jumpinjo]

just flash with this bud

http://www.digital-kaos.co.uk/forums/downloads/arnet-kryptview/31/kryptview-a750-25-05-2010-firmware-1238/

[akhlaq768]

Thanks mate... i'll give this a shot tonight

[jumpinjo]

if not able to update to latest through menu once flashed gis a shout

[akhlaq768]

thanks again, so let me get this right, once ive flashed the box, i need to update the software using the box itself?

[akhlaq768]

i get the following error message can one help
Internal Server Error

[janobi]

i get the following error message can one help
Internal Server Error

Same for me, downloads must be down.

[cactikid]

this one.
Digital Kaos - Downloads - Prolific Driver Installer (http://www.digital-kaos.co.uk/forums/downloads/arnet-kryptview/31/prolific-driver-installer-1370/)

not this one as advised lol

[akhlaq768]

u sure its the right one?

[smirnoff_rules]

this is 750 and loader

[DW190]

this one.
Digital Kaos - Downloads - Prolific Driver Installer (http://www.digital-kaos.co.uk/forums/downloads/arnet-kryptview/31/prolific-driver-installer-1370/)

This is the drivers for the Prolific USB to SERIAL adaptor.

[akhlaq768]

can anyone help please... just loaded the software onto the box.

ive just tried a rescan and nothing happens...

there are only 2 constant lights on the icconector...

what am i doing wrong?

thanks

[cactikid]

power off box at back/on and also reboot router

[satsmo]

You need to use the FW
http://www.4shared.com/file/LSyDlfzn/Kryptview_A750_09092010.html

I thought I updated it on one of the stickies, if not I will do so now.

[akhlaq768]

power off box at back/on and also reboot router

will give this a go now... plus on the menu screen it says update should this be done?

thanks

p.s. how many lights should be to know its all working?

[smirnoff_rules]

and leave on ss1 and have a drink .. sometimes thats a few minutes to clear

[satsmo]

Using the FW link above, follow these steps:

Please be advised that if you upgrade your A750 with the latest firmware, make sure your IConnect is powered OFF when doing the new channel scan.

Only reconnect it and power it back up again once you have a TV signal displayed on the TV (Usually channel 0000).

Once you power up the IConnect, it should take over the A750 and download a major update from the internet. This is normal and should be allowed to proceed (display shows on both the TV and the A750). Once the A750 display shows the word SUCC it is complete and you may now use your IConnect in the manner in which it was designed.

If you get the above wrong, the IConnect will sit there and only display 2 green LED's (power and connection). If this is the case, re-read the above and you have to start from the beginning (re-flash)

[smirnoff_rules]

does Kryptview_A750_25052010 not work now then ? my m8 has that on his and its ok

[akhlaq768]

its SUCC on the box and the TV says Module Update Success.. what now should i power it OFF and ON... as the remote wont let me exit

[satsmo]

Yes it works but the latest FW once flashed correctly has quite a few updates and a new menu item that has yet to be implemented.

The updates are improvements in relation to responsiveness, (without going into details) of the STB as well as the remote.

Suffice to say if it aint broke don't fix it can also apply in regards to using older FW, but the latest is always advised.

[satsmo]

its SUCC on the box and the TV says Module Update Success.. what now should i power it OFF and ON... as the remote wont let me exit

How many LEDs showing on the IConn? You may power on and off if you like either way.

[akhlaq768]

Only two lights are showing... now

This is my process i took (please correct me if ive done anything wrong)

Flashed Box
Connected Box to feed and scanned the program
Power up the i-Connector
Wait and see....

[smirnoff_rules]

1 turn off router
2 turn off box at rear
3 unplug power on i-conn
4 reconnect all and leave on skysports 1 or a few minutes

[akhlaq768]

will give this a go now

[akhlaq768]

also, am i using the write TP for Birmingham - 41011?

and i don't have channel 0000

[akhlaq768]

1 turn off router
2 turn off box at rear
3 unplug power on i-conn
4 reconnect all and leave on skysports 1 or a few minutes

UPDATE - still having no luck with this... :-(
any suggestions?

[akhlaq768]

Box is now showing FAIL every couple of seconds or so...

Should i re-flash the box again?

thanks

[cactikid]

did you get a list of channels when scanning,and are you using correct net id

[akhlaq768]

Yes I got all the list of channels when scanning and can select them but they still scrambled, but that’s understandable as the I-connector isn't working, the net id for Birmingham im using is 41011

[akhlaq768]

i still have no luck have tried re flashing a re scanning i still only have 2 lights, one of which is flashing every 5 secs or so.

any adv???

thanks.

[cactikid]

sounds as if not connected to the net,is your lan cable correct
as i have heard some dont,can you try in a different location,remember to reboot router and box by powering off at back for a short while then on.

[akhlaq768]

i have tried a different lan cable and still no luck. afte re scanning the box it is fine, and once i power up the i connecter my front display of the box immediately comes up with a fail message. this keeps flashing up every 2 seconds or so. this is the point in which i am stuck as the a750 is not doing the major update that it should.

[smirnoff_rules]

r u using the null cable that came with the i-conn

[akhlaq768]

yes i am using this

[smirnoff_rules]

yes i am using this

wonder if its damaged ?

[akhlaq768]

how do i check this?

[smirnoff_rules]

u would have to use a mulitmeter . best to get another from maplins . but lm only guessing m8 at the minute .. it should be working

[akhlaq768]

just tried another cable and still no luck, i have re flashed the box about 5 times, and still no luck as soon as i connect my i connector my box just keeps flashing FAIL and the 1 of the 2 LED lights starts to flash the other remains constant.

[akhlaq768]

just wondering is it because im using a modded modem? ive got a motorolla Sb5101e using haxoware!

is thats why my iconnector isn't working

[smirnoff_rules]

l have searched google for the last 20 minutes and the only box that says fail is the kv700 there isnt a thread anywhere that has had fail on the front of an 750 ? strange that

[akhlaq768]

thanks for searching but i definatley have the black A750.

Do you think its a issue with the IP address on the modem? or something?

[DW190]

thanks for searching but i definatley have the black A750.

Do you think its a issue with the IP address on the modem? or something?

Are you using a router or straight into the modem?

[akhlaq768]

i am using a router however have tried plugging it straight into the modem.

[DW190]

i am using a router however have tried plugging it straight into the modem.

Looking at the rest of the thread it looks like its updated itself when first used as you mentioned Succ.

First make sure your terestrial channels are working: BBC1, 2, ITV, C4 & Five.

With all devices powedred on and the box on Sky Sports 1 start with the Modem by powering it off for 10 secs then back on, wait till lights are stable then do the same with the router, then the Iconnector, then the box.

[akhlaq768]

All terestrial channels are working perfectly.

will power down all devices and power up... will keep you updated

[DW190]

All terestrial channels are working perfectly.

will power down all devices and power up... will keep you updated

Dont power them down all at once. Leave all on and do one at a time.

[akhlaq768]

I'll do them in the following order

KV ON (SkySports1)
Iconnector OFF
Router OFF
Modem OFF

Modem ON (leave until all lights are on)
Router ON
I-connector ON

[DW190]

I'll do them in the following order

KV ON (SkySports1)
Iconnector OFF
Router OFF
Modem OFF

Modem ON (leave until all lights are on)
Router ON
I-connector ON

No, All on. Modem off and on, wait till lights are steady. Then router off and on, wait till lights are steady, then Iconnector, then box. The idea is to get everything to sort out its own ip in the right order.

[akhlaq768]

been reading that i should use fw 17052005 firstly...

has anyone got a copy of this one... can't find it under the download section...

thanks

[akhlaq768]

i have powered on and off in the order stated above and still no luck.

[DW190]

i have powered on and off in the order stated above and still no luck.

Sounds like it could be a dicky Iconnector. I've had a couple myself.

[DW190]

been reading that i should use fw 17052005 firstly...

has anyone got a copy of this one... can't find it under the download section...

thanks

That would indicate the fw was released in 2005 which is impossible.

Try this one:



Sorry wrong one, here it is:

http://www.4shared.com/file/shJZMXMt/Kryptvew_A750_17052010.html

[akhlaq768]

thanks for posting the 17/05/2010 file, tried that with a new NULL cable and guess what...........................

still not luck, giving it one last shot at this... (its been a veru long week) going to try the box at another house, using a genuine modem... and not a modded one... if it works then the problems with the modded modem i have... if it doesn't then its the iconnector itself... which will be returned back to the seller...

will keep u guys updated... thanks again

[joe3666]

thanks for posting the 17/05/2010 file, tried that with a new NULL cable and guess what...........................

still not luck, giving it one last shot at this... (its been a veru long week) going to try the box at another house, using a genuine modem... and not a modded one... if it works then the problems with the modded modem i have... if it doesn't then its the iconnector itself... which will be returned back to the seller...

will keep u guys updated... thanks againyou have to have the basic broadband package fgs not some modded modem you dont get it all for free