Fiat IAW 5SF.MH

[ta2lt]

I want program with xprog-m Fiat IAW 5SF.MH please help me connection point on board

[yellowstilo]

i don't know the pinout but the 8 soldering pads at the right side above the big processor are for BDM programming.
The BDM programmer has a special Marelli adapter for these connections.

[ta2lt]

BDM100 NEVER CONNECT ST10F280 MCU

[eprommazza]

I want program with xprog-m Fiat IAW 5SF.MH please help me connection point on board

see it

regards

[eprommazza]

i don't know the pinout but the 8 soldering pads at the right side above the big processor are for BDM programming.
The BDM programmer has a special Marelli adapter for these connections.

if we let us do good to help someone
what you say and all wrong
:boring:

[banetv]

i don't know the pinout but the 8 soldering pads at the right side above the big processor are for BDM programming.
The BDM programmer has a special Marelli adapter for these connections.
There are not points for BDM (some SMD soldering pads).
-eprommazza- is right.

[yellowstilo]

i'm sorry if my information was wrong - these connections seemed very similar to other Marelli ecu's with BDM contacts...
Sorry again and thanks for the correction !

[eprommazza]

i'm sorry if my information was wrong - these connections seemed very similar to other Marelli ecu's with BDM contacts...
Sorry again and thanks for the correction !


NO PROBLEM
:wavey:

[ta2lt]

I have xprog-m and galetto but I don't know pinout for xprog-m and not listed in galetto

[banetv]

Maybe this help
http://s2.postimage.org/rBLy9.jpg (http://postimage.org/image/1k1hda1es/)

[dikseln]

BDM is Backgraund Debug Mode It appears in many Freescale Semiconductor (http://en.wikipedia.org/wiki/Freescale_Semiconductor) (Motorola) products. This is ST Microelectronics serie ST10F280, so is not possible to dialog with classic interface for BDM. In this moment Xprog have the ST10F280 read and write, but is important to erase before writing.
Attached the wiring diagram for Xprog-m

[sfiorentina]

any one have virgine dump?

[Mulatre]

Virgine dump of Fiat Doblo 1.4 IAW 5SF.MH needed, too! Please, help!