MAGNETI MARELLI IAW 1AVPD8AK

[BimmerGT1]

Hi I need to know wich memory is on this ECU IAW 1AVPD8AF , I see an eeprom L9111 9020 and this

TMS 27PC010, and yes I need IMMO OFF. mask 2F37E. I desolder the 2f37e and use the pin conection on xprog manual but reads all 0000000000, no info on it , there is 2 optional wires Im not sure if I have to solder those too, ANY HELP WILL BE GREAT, THIS ECU IS FOR A GOL BRASIL.
Does any body have a conection pin for 27pc010 I will read that too, and the only eeprom on the ECU.
IM NOT USING BDM TO READ THIS mcu , i USE DIRECTLY FROM xPROG M PORT.


Im using xprog-m to read hope this reader will be ablle to do it, let me know how I can read it thanks.

Here some pics hope this will help I think is for a GOL for south america, the ecu is from brazil.

If you know how to read 27c10 with xprog let me know, there is another eeprom and 2 controllers I have no problem with eeprom but this one cant find the match on xprog-m v5.0

[kugglefischer]

Hi I need to know wich memory is on this ECU IAW 1AVPD8AF , I see an eeprom L9111 9020 and this

TMS 27PC010


Im using xprog-m to read hope this reader will be ablle to do it, let me know how I can read it thanks.

Hi
what car is this out of?
Because if thats that eprom you only found, you desolder it ,read it with a regular eprom reader /programmer....
I dont think thats where the immo is though?
Post a pic of the ecu so we can have a look m8....

K

[tato]

hello friend
I confirm that immobilizer is in 27c010
can be read with any universal tool
review data for plcc 32 pin
I have no XPROG, I'm not sure you read this eprom

[nicamarcos]

hello friend
I confirm that immobilizer is in 27c010

Wrong, immobilizer is into 68HC11F1, now if you want kill immo, you can do trough via plcc eprom, but IMMO isn`t eprom for sure.

[tato]

Wrong, immobilizer is into 68HC11F1, now if you want kill immo, you can do trough via plcc eprom, but IMMO isn`t eprom for sure.
ok
is what I meant, Immo killing in eprom
Greetings
I feel bad English

[BimmerGT1]

Thank you Tato, but Im confuse the is a 68hcf1 with mask 2f37e, I can read with XPROG-m but dont have pin connection to processor

[BimmerGT1]

Hi Nica Marcos, can you tell me the pin connection with XPROG-m???? to 68hc11f1 or any body please

[tato]

hello BimmerGT1
I leave you some pictures, which went up another friend of the forum
perhaps help

[BimmerGT1]

Hi Tato, I read the 68hcf but cudnt read it, do you have apin for 27pc010?? let me know and thank you

[BimmerGT1]

Hi nicamarcos, eres de nicaragua?, help I plug xprog to the MCU 68hcf but no reading all 000000000 , I may be doing something wrong, any ideas.


best regards

[BimmerGT1]

Hi nicamarcos, eres de nicaragua?, help I plug xprog to the MCU 68hcf but no reading all 000000000 , I may be doing something wrong, any ideas.


best regards

[DiegoAC]

Bimmer, you wanted immo off right? Why in heaven are you trying to read the micro, just load the eprom with the correct immo off file and you?re done...

Regards.


Hi nicamarcos, eres de nicaragua?, help I plug xprog to the MCU 68hcf but no reading all 000000000 , I may be doing something wrong, any ideas.


best regards

[BimmerGT1]

Hi DiegoAC, well I was told is in the micro, and TMS but I did a litle search and I think is on TMS as TAto told me so tomorrow I will read it, and on IAW is confusing some have immo on MOTOROLA and others on TMS or eeproms so thank you guys all for you help, DK ROCKS

[DiegoAC]

Well, it`s just like Nicamarcos said. Immo is on micro but with immo off eeprom you`re done.
check pm.

Regards.


Hi DiegoAC, well I was told is in the micro, and TMS but I did a litle search and I think is on TMS as TAto told me so tomorrow I will read it, and on IAW is confusing some have immo on MOTOROLA and others on TMS or eeproms so thank you guys all for you help, DK ROCKS

[elosomaloso]

hi Diegoac, I send you a pm

[DiegoAC]

Got it, pm back. regards.


hi Diegoac, I send you a pm

[GCHARON]

USE SUPERPRO580 FROm XELTEK to read 27C010
DESOLD THE DEVICE LOAD IT IN SUPPORT
AND READ IT
SUPERPRO IS UNIVERSAL PROGRAMMER
ITS WORK PERFECTLY FOR YOU DEVICE
SAY THANKS

[davidnz]

hello bimmergt1 tell you what the marelli 1AVP 27cxxx desimoviliza of what you have to replace a deputy Realty 28f010 off ok.

[cristiandash]

Hi everyone i need immo off for this ecuhttp://www.digital-kaos.co.uk/forums/attachment.php?attachmentid=304785&stc=1
thanks

[gselectric]

any sollution up here please