cat c-15

[r3gill]

Hi friends this may be a noob question for some of you guys but I bought a truck with c-15 engine and would like to flash my ecm from 435 to 600 horse. i have removed my 10 speed for an 18 speed and going to pull super b's with this tractor, any help how to up yhe horsepower? all i have for now is cat et2010.

thanks in advance

[dieselman77]

You have to check with the cat dealer or someone who really knows the cat engines to go from 435 to 600 hp your probably going to have to put 6 new injectors in it and possibly change the cam, pistons, crank, head, etc. it could be alot of money buy it may not be getting the flash files is the easy part but you want to make sure the engine you have can handle the power so it doesnt come apart on you post the engine serial number with the arrangement number and i will look on sis and see what the flash files are that they list for that the engine have a good one

[jtr8178]

Hi friends this may be a noob question for some of you guys but I bought a truck with c-15 engine and would like to flash my ecm from 435 to 600 horse. i have removed my 10 speed for an 18 speed and going to pull super b's with this tractor, any help how to up yhe horsepower? all i have for now is cat et2010.

thanks in advance

If you give me your engine serial # I can look it up and tell what it can be uprated to.

[r3gill]

thanks for the reply guys truck is parked in the yard outside my town. I will go down there tomorrow and get the info.

thanks again

[mecaniquito]

Hello gentlemen I am a bit new to this site but not if I can help with a problem.Mechanical'm in mexico and I have a Cat C15 engine disassembly and was wondering if anyone can provide a complete manual for the engine in advance thank you very much

[alcoholahmed]

Hello gentlemen I am a bit new to this site but not if I can help with a problem.Mechanical'm in mexico and I have a Cat C15 engine disassembly and was wondering if anyone can provide a complete manual for the engine in advance thank you very much
i have the parts manual for the c15
for this serials

L6B1-up engine
L7A1-up engine
C5L1-up genrator set
FFH1-up engine

if u want me upload ,let me know

[mecaniquito]

hello if you please upload it and alcoholahmed thanks for answering

[alcoholahmed]

hello if you please upload it and alcoholahmed thanks for answering

link is in the attachments

[sova]

Please password.
Thank you.

[mecaniquito]

hello alcoholahmed excuse the inconvenience but this manual does not bring the motor assembly and Dearman cooperation could support me with a tractor and you agradesco to wholeheartedly thank the help

[alcoholahmed]

hello alcoholahmed excuse the inconvenience but this manual does not bring the motor assembly and Dearman cooperation could support me with a tractor and you agradesco to wholeheartedly thank the help
give me ur machine s/n and tell me what are the parts u need and i will give their part nos. and their drawings

[torqueman]

hello alcoholahmed excuse the inconvenience but this manual does not bring the motor assembly and Dearman cooperation could support me with a tractor and you agradesco to wholeheartedly thank the help

I can provide u all the torque specs if you want for c15 single turbo upto mbn series.If yes tell me waht u want to do, whole inframe or just cylinder head.

[BADGASS]

What is your engine ser #? 435 were usally 5EK wich had crank problems. But any way,yes you can slide 550 file into it. Then make some other adjustments and let the smoke roll. Is it 40 pin or 70 pin?

[BADGASS]

YES you can slide a 600 file in it!!!!!!!

[CESARIN]

you have the password for it?

[CESARIN]

link is in the attachments
please the passwor?

thanks!

[benjamin8989]

When you want to contribute something ... raise it ... else you not raise anything...I already decompressed it and a blok of empty notes appears ... I have one break files

[wrenchead]

Hi friends this may be a noob question for some of you guys but I bought a truck with c-15 engine and would like to flash my ecm from 435 to 600 horse. i have removed my 10 speed for an 18 speed and going to pull super b's with this tractor, any help how to up yhe horsepower? all i have for now is cat et2010.

thanks in advance

try this on. might work

[Juanincho]

Hi friends this may be a noob question for some of you guys but I bought a truck with c-15 engine and would like to flash my ecm from 435 to 600 horse. i have removed my 10 speed for an 18 speed and going to pull super b's with this tractor, any help how to up yhe horsepower? all i have for now is cat et2010.

thanks in advance

Well, I found that the c-15 goes up to 550hp 1850lbft, I'm not sure for it about going to 600 hp but I made a c-15 run 600 hp 2050 lbft with a c-16 flash, only problem it heats a lot and the boost pressure stands at 35 psi all the time. So I would not recommend putting a c-15 to those specs. :alberteinstein:

[catfan1]

I know this is a C15 thread but I have some c13 multi torque engines that I would love to increase the fuel mpg. Does anyone have any ideas. They are 430 multi torque 1550/1750 at 1200. They are cut back in top gear and 9th, idle timers and still only get around 5.2mpg. Not very strong. Also does anyone know what the difference is with the EURO files. If emissions are less strict

[chesterqc]

Here a easy think to do on Cat to increase HP and fuel economy, put a 100 ohm resistor in the fuel temperature connector. On a C15 or 3406E that will give 25to50 hp on rear wheels. Tested!

[diesel88]

help me with the pass for rar file please
thanks in advance!

[GoodPuppy]

Here a easy think to do on Cat to increase HP and fuel economy, put a 100 ohm resistor in the fuel temperature connector. On a C15 or 3406E that will give 25to50 hp on rear wheels. Tested!

Well, the fuel temp resistor does fool the Instrament cluster and QC mpg reading. So beware and do a true at pump measure too. Good idea...

[GoodPuppy]

Hey, from my finite knowledge, a 435 can be increased to a 550. But, if you clean the ecu or find a blank it can be increased to or flashed with a 600+ file. Corrections pls...

[nguyenvu]

Thanks ,help password C15

[eric486]

I have a customer here that uses a 550hp c15 for heavy haul loads. He says it pulls great even up to 200,000 lbs loads. As stated you can only up it to a 600hp if you change you serial number in the ecm to a c16 and reflash it.

[Gear head]

It depends on engine serial number if I know serial number and hp rating I can tell you which file to put in that does the best and give you some good fls and fts numbers to match. But you will need password generator to do.

[parezoo]

link is in the attachments

Pass please

[jdawg]

tricks also for the cats, make sure your fuel pressure is above 105lbs, there is an update from cat for the check return valve to increase the pressure. Change your air filters regularly, at least 2 to 3 times a year, even if the gauge says they are ok. Put a fuel cooler at the retun line where it enters the tank, acert injectors dont like hot fuel.