Mercedes sprinter lost keys

[obdmaster]

Ok my friend who is locksmith gave me this job , he knows what hes doin that lad. lol

1999 mercedes sprinter with temic immobox mc68hco5x16 qfp64, couldnt read with xprog-m so i removed chip and put on blank pcb qfp64 adaptor wired as in upa drawing and put oscillator between pins 28+29 it read but all eeprom data is FFFF , aaaaah no!!!

I was reading a post about a vito with same immobox ,which my friend Lupu sandu says says that if you read with UPA, because its secured it will erase all eeprom data.

So am i correct in assuming i need a dump for immobox? which i can write with UPA now. make transponder to suite zed bull and use start error 1.3 to virginise ecu.

If i do this will vehicle start without the need for STAR? Automatically code Ecu to immo?

[Meat-Head]

I was reading a post about a vito with same immobox ,which my friend Lupu sandu says says that if you read with UPA, because its secured it will erase all eeprom data.



OOPS.

DUMB QUESTION:-

Is it a 4 cyclinder inline diesel pump?

If yes:-

Get a bucket - preferably NOT black or other dark colour.
Place bucket under Diesel pump, get LARGE hammer and cheisel (poundland - good stuff).

Look at side of pump *HOPEFULLY* you will see a fuel in pipe from filter
that goes into a 'matchboxed sized' black square with a sheer bolt.

Place your Poundland cheisel on this black blob shout 'FORE' and twack with Poundland hammer.

PLOP into the bucket is a 'bullet' - use this later in a 'Potato Gun' off your workshop airline - see how many windows you can smash with it.

You are then left with a black box swinging. CAREFULLY put this back and CAREFULLY twack it.

Short out starter (not sure) CRANCK LONG TIME (airlock) STING punter

don't forget to upload that Rover Raving thing. Thanks

YouTube - Technohead - I Wanna Be A Hippy

[obdmaster]

Thanks for reply m8, but ive not even seen van, was meant to just make transponder from dump with zed bull , but now it seems im in a right world of hurt, I found these from another thread though. looks good.

Browse (http://www.elektronika.renado.pl/index.php?option=com_virtuemart&Itemid=3&lang=en)


and i think the blondie behind the desk is the owner, why dont more people in car trade look like her.:eating:

[Meat-Head]

Browse (http://www.elektronika.renado.pl/index.php?option=com_virtuemart&Itemid=3&lang=en)

:eating:


OFF TOPIC:-

Nice to see an immo emulator for vauxhall. The PDF says "For lost keys or car burglary" or something. Lot of ~~~~ing about to pinch a car. Better off towing it away.


ON TOPIC:-

Bit deer though

Car Radio Decoding Online Store - Mercedes Sprinter & Vito Key reading (Powered by CubeCart) (http://www.car-radio-decoding.com/shop/index.php?act=viewProd&productId=115)

[obdmaster]

Thats all i wanted to do myself, bet he knows what hes doin though. lol

[Meat-Head]

Thats all i wanted to do myself, bet he knows what hes doin though. lol

LISTEN CAREFULLY.


, couldnt read with xprog-m so i removed chip and put on blank pcb qfp64 adaptor wired as in upa drawing and put oscillator between pins 28+29 it read but all eeprom data is FFFF , aaaaah no!!!





Post about this here:-

http://www.digital-kaos.co.uk/forums/f152/whats-your-biggest-fu-k-up-66871/



Then here:-

http://www.digital-kaos.co.uk/forums/f152/what-would-you-do-159120/


Whilst waiting for reply from the 'Lame Excuse dept'

[obdmaster]

this is just one of them things m8, all i need is good dump and im back in action. lol

[Meat-Head]

this is just one of them things m8, all i need is good dump and im back in action. lol

Sorry can't help - had a good dump today - smelt real bad though.

Z786 found this last week - you just need a *LITTLE* help and ~~~~ all
(like the vistor msg i left you lol).

Worth looking at the pump to see if can twack it off.

Have you checked Adam28's virgin dump and immo off.

NO IDEA IF HELPFUL.

What about them dubious "Start error" programms that crop up from time to time on here

Mercedes Start Error VITO SPRINTER ERROR on eBay (end time 17-Nov-10 18:39:59 GMT) (http://cgi.ebay.co.uk/Mercedes-Start-Error-VITO-SPRINTER-ERROR-/110600299639?pt=UK_Diagnostic_Tools_Equipment&hash=item19c04aa477)

[z786]

heres a thought, do you know any scrapyard that will let you "Borrow" one for a bit?

[puiu]

Here is a god file,
god luck

best regards

Puiu

[pianoman58]

Hi, Done several of these with xprog m, you have to remove from board and I just press it gently on to the 0005 (i think) adaptor and bingo first time .
I couldn't do it with wires on the board, wasted tons of time trying
My xprog-M is Rev.E but i dont know what the difference is with rev.E
Hope this helps

[kavan]

Here is a god file,
god luck

best regards

Puiu

hi, do u have the ecu dump for this immo, i need a set?

[puiu]

hi, do u have the ecu dump for this immo, i need a set?
Sorry i dont have it ,
but you dont need a set ,
with the right tools and knowledge
you can match ECU with immo box

regards

Puiu

[Meat-Head]

GO ON THEN - be a devil and update this thread.

Did it cranck long time, or hi-ho silver away?