Passat B6 clear crash.

[meteor80]

Hello.
I need to clear crash from airbag sensor:
VW Passat B6
TRW
3C0 909 605k

Thanks in advance.

[morfej]

Try and report.

[meteor80]

thanks but not works
:/
I have sporadic module error
014-sporadic
and i cannot to erase that

[meteor80]

Hello again.
I've scanned car using vag commander 1.4 and it says:
Seuergeraet Permanent error defect 00003.

Does anybody have some idea?

[mcm44]

You have to find other dump with numbers 3C0 909 605 K and with the same software coding as original one. Then write whole file to EEPROM. This should resolve your problem, if the unit isn't totally damaged.

[meteor80]

I know, but i cannot to find dump with this numbers.

[diagaut2]

try this my freind

[meteor80]

Thanks for all.
I solved that problem.
I have used "original" file, connect all airbags (resistors for try) and cleared DTC's using Vag Can Commander anr now Airbag flash is off and no trouble codes.
That is weired but work's.
Best regards and thank's again.

[smirnoff_rules]

are u going to fix the fault ? or just sell/use without airbags now

[meteor80]

My client didn't buy passenger airbag, but want's to repair airbag system. So I have connect resistors instead of passenger airbag.
Such was the decision of my client.