View Full Version : Passat 97 dash pinout
fuego
28th October, 2010, 08:42 AM
NEED DASHBOARD POWER SUPPLY PINOUT FOR PASSAT MAgneti Marelli insaid motorola procesor MC68HC711KG4
Tnx!
TULGEYWOODMAN
28th October, 2010, 09:56 AM
Work it out yourself.
1. find ground on pcb
2. meter it out to the pin[s]
3. experiment with 12 v onto remaining pins until cluster powers up
TULGEYWOODMAN
28th October, 2010, 10:15 AM
feugo
You are a disgrace to this forum.
You ask a question in English
I give you answer, the method I have used for 20 years.
Your reply in Romanian was "**** ** ****"
You then sent me a pm saying " **** **** ******"
What a pity you dont live by me, I have a saying that goes...never say anything bad unless you know who you are speaking to.
I hope the moderators see this post and ask what you are up to
Have a nice day today.
PremierD
28th October, 2010, 10:22 AM
We did ... And took the appropriate action ................
TULGEYWOODMAN
28th October, 2010, 10:24 AM
thankyou
I did try to reply to his pm.
here is the content.
I repeat,
find ground on pcb, if you dont know how, then read a book.
confirm ground on cluster plug pins.
use 12v supply, touch all none ground pins observing current consumption.
you may have to connect more than 1 pin to power up cluster.
An apology in English on the open forum for your strange behaviour will be acceptable
lukylucienn
3rd November, 2010, 09:08 PM
Work it out yourself.
1. find ground on pcb
2. meter it out to the pin[s]
3. experiment with 12 v onto remaining pins until cluster powers up
You must be joking! --->
experiment with 12 v onto remaining pins until cluster powers up :questionmark:
sorry, but reverse polarity will destroy the dashboard
feugo
I give you answer, the method I have used for 20 years.
for 20 years or since 20 years ??
Powered by vBulletin® Version 4.2.5 Copyright © 2024 vBulletin Solutions Inc. All rights reserved.