Help need with motorola 68hc08az32 pins

[athlonxp]

Help need to read volvo v70 dashboard motorola 68hc08az32 100pins with XPROG. I try pins like xprog manual but don't working, I get an error "communication error". Maybe anyone connect with this procesor and knows pins? Thanks

[babilon]

see if the datasheet is useful
:wavey:

[tachonow]

Power Xprog unit with 15V min 1A.
Maybe you have to raise reset pin.

[BeianM]

I think this is relevent >> http://www.digital-kaos.co.uk/forums/f174/1j35d-security-bytes-espace-2001-dash-125987/index2.html
once you establish the baud rate reboot the processor as it does not like to be interrogated more than once without reset.

[athlonxp]

is this mottorola secured or not?

[athlonxp]

Power Xprog unit with 15V min 1A.
Maybe you have to raise reset pin.
Raise reset and power up 15v but not working, now "communication error"

[bodzio012]

You try raise or give up PTCO, PTC1, IRQ and RESET and you read success

[Daniulis]

Raise reset and power up 15v but not working, now "communication error"

You must power the dash. Good luck

[athlonxp]

Is this motorrola secured or not and where to find motorrola procesors security bytes?

[almeida]

wich is the mask?

[athlonxp]

wich is the mask?
its a 0J66D

[lari95400]

hello
security bytes : BE07 BD57 BD57 BD54

[markony79]

On this volvo all lamp for cluster must work ,
then you can have read the processor

[lari95400]

Behold the friend

for hc08xxxx

[nckryder]

THANKS BUDDIE WILL GIVE THEM A TRY :wavey: