Ford focus P1200

[Liteace]

Hi All, donr oil and filter change on:

2001 Focus 1.800 diesel Tdci (F9DA)

Today, plugged in as I do and got code:

P1200 injector range or performance

i cleared the code and it came back straight away, didn't look any further, no time. As we have only a few Fords here and you guys in the UK have loads, is there anything common on these that will show this code, it will save me time, so more time to spend on DK

Thanks

[Meat-Head]

Has done more miles than the Star Ship Enterprise?

*THINK* that one is NOT coded errectors

[Ashraf6119]

Hi

Check the Injectors resistance between two pins it should be 0.2 ohms, you might have one of the injector faulty. (may be high resistance, or it could be lose wiring connection)

Note: If you do replace any of the injector than they do need reprogramming.

Ash

[Meat-Head]

Note: If you do replace any of the injector than they do need reprogramming.



HI

NOT GOING TO ARGUE, BUT WOULD AGREE WITH
YOU IF WAS AN 02 MONDEO

LITEACE

DOES IT RUN OK, JUST THE ONE CODE?
IF INJECCTOR CODING INCORRECT THEY RUN LIKE
THEY ARE ON KANGROO JUICE
ALSO IS IT OFF A POT?


HTH

MEAT

[Liteace]

Its done about 126.000Klms (78.000miles) he doesn't cane it, it runs well but he did say it vibrates a little more than the norm on idle, I thought it was ok compared to my Liteace and Golf 3 Tdi

[Liteace]

What do you guys use to code new injectors on these ??

[Meat-Head]

What do you guys use to code new injectors on these ??
http://www.digital-kaos.co.uk/forums/f152/madza-d-p-f-question-101124/index3.html#post564384

[mage]

I had TDCI with DTC P1200 here at my garage.
P1200 cannot be erased like normal DTC.
I fixed this by re-entering all 4 injector codes.
I used KTS.
After re-entering the P1200 was gone.