picture sw13 bsi peugeot citroen

[motorsport]

hi all some one know picture connection sw13 cable 8pin can use with datamart for bsi peugeot citroen 207 and 308 C4 407 double pcb
and 307 2003 2005

ps info ; 207 C3 2006 308 2007 407 ...with double pcb have same bsi and same conection
tanks for you help :wavey:

[Irgl]

hi all some one know picture connection sw13 cable 8pin can use with datamart for bsi peugeot citroen 207 and 308 C4 407 double pcb
and 307 2003 2005

ps info ; 207 C3 2006 308 2007 407 ...with double pcb have same bsi and same conection
tanks for you help :wavey:
this is 207 and 308 i tryed with DIGIPROG

[Irgl]

this is 307 2003-2005 95160 inside

[motorsport]

this is 207 and 308 i tryed with DIGIPROG

you have test with datasmart 3+
or with digiprog?

[Irgl]

you got PM

[motorsport]

any one have datasmart3+

[ALEXEI]

last time when i did it incircuit i kill the bsi the eeprom dump was lost.

[motorsport]

last time when i did it incircuit i kill the bsi the eeprom dump was lost.
witch car have you test and witch tool picture have use

[Irgl]

maybe wrong conection me hapen too once with UPA

[ALEXEI]

witch car have you test and witch tool picture have use


data smart is not safe to read in circuit valeo bsi is the one you ask.
read my Thread amigo.

http://www.digital-kaos.co.uk/forums/f174/need-help-bsi-207-problem-after-read-dump-car-dont-start-161206/

[motorsport]

data smart is not safe to read in circuit valeo bsi is the one you ask.
read my Thread amigo.

http://www.digital-kaos.co.uk/forums/f174/need-help-bsi-207-problem-after-read-dump-car-dont-start-161206/

i have check you ha use shematic digiprog and i and i think maybe wrong comnection because with diga pin cable is 18273645 and datasmart is 87654321
and you have make 3wire on one test points

[ALEXEI]

i have check you ha use shematic digiprog and i and i think maybe wrong comnection because with diga pin cable is 18273645 and datasmart is 87654321
and you have make 3wire on one test points

may be i am wrong but i thing i did all correct i use 3 difrerent shematic and 3 tools because the numbers is the eeprom pins, so the picture first i read with diga no results then with datasmart soldering the cables exactly as the numbers of the pins from datasmart adapter to the testpoints numbers from the pic anyway motorsport i will be hapy if you can read and wright incircuit this bsi with smelecom tool.
i am shure that 100% enigma and dp3 can do:thefinger:

ps. open the pcb and work safe way all done take me about 30 min.
succès

[motorsport]

may be i am wrong but i thing i did all correct i use 3 difrerent shematic and 3 tools because the numbers is the eeprom pins, so the picture first i read with diga no results then with datasmart soldering the cables exactly as the numbers of the pins from datasmart adapter to the testpoints numbers from the pic anyway motorsport i will be hapy if you can read and wright incircuit this bsi with smelecom tool.
i am shure that 100% enigma and dp3 can do:thefinger:

ps. open the pcb and work safe way all done take me about 30 min.
succ?s


i can make all bsi 2004 2010 by obd2 but i need 600euro for active my option i will reflect

[z786]

wat tool do you use to do bsi via obd???

[motorsport]

wat tool do you use to do bsi via obd???
psa commander

[tachonow]

wat tool do you use to do bsi via obd???
Me too Im curious. Ive just receive the latest DP3 update and didnt saw anything about BSI via obd. Just new MB via obd.

[drpeter]

data smart is not safe to read in circuit valeo bsi is the one you ask.
read my Thread amigo.

http://www.digital-kaos.co.uk/forums/f174/need-help-bsi-207-problem-after-read-dump-car-dont-start-161206/

I have done many BSI's in circuit with diga, read/write takes a long time but it never let me down.

[Irgl]

Me too Im curious. Ive just receive the latest DP3 update and didnt saw anything about BSI via obd. Just new MB via obd.
Hi check this www.abritus72.com (http://www.abritus72.com)