How to read a ECU with software with "No Read" function

[smooth1]

Hi,

Please help. I have Byteshooter mini slave. I want it to read cars that has software on it with "No Read" function. Can anyone help?

Smooth

[dataman]

Either go back to older version of software maybe from around 2006, or just lift the chip and use device programmer.

[ominimicu]

no read- means it cannot read them. You ll have to get an Original file, mod it and jsut write it.

[del635]

Desolder the chip and read with programmer, open the file in a hex editor and go to near the end, lokk at the asci at the side you will see 'noread' change these values to 0 or ff cant remember you'll see anyway though.

[smooth1]

Hi,

These are ECU,s which are hybrid or sealed. No BDM port. What do you do?

[rsibiza]

Hi,

These are ECU,s which are hybrid or sealed. No BDM port. What do you do?


Some ecu s cant be read...you need get ori file from your supplier...

[otzi]

Hi,

Please help. I have Byteshooter mini slave. I want it to read cars that has software on it with "No Read" function. Can anyone help?

Smooth
Wiht Dimsport New Genius,Transdatabdm read & write all ecus
No Read ,CMD,EVCBDM function ,,,,,,:sleep:
Sory for my bad Eng.
BR