PDA

View Full Version : vauxhall pin codes


ninja123
2nd November, 2010, 09:13 PM
hi all, could do with a bit of advice - im quite new to immob & key programming, have purchasd a fair bit of kit now, but just wondering what chip do i need to read dump from to calc vaux pin codes, and what kit i would need to read,
Many thanks in advance
racin-snake
2nd November, 2010, 09:15 PM
upa and read tms 370 on arial round barrel
older vauxhalls have a motorola mcu
but nasratec have a pin reader for obd socket never used it but it has had good response from a few guys on the forum
ninja123
3rd November, 2010, 09:48 PM
I have been following posts on this software, and every time i think 'ok, ill buy it', up pops another post where it has not worked!
But the only other options are either long winded postal options or icc.
ninja
racin-snake
3rd November, 2010, 10:08 PM
hot air remove chip read for earlier ones
aint done any newer ones yet
but guaranteed if ya get chip off and read upa and xprog work ok for tms 370
both cheap too
de solder and get pin sorted
plus nasratec tool is for 1 marque upa and xprog do lots

choice for me is real easy
but i dont see many
but options for other readable chips for pins with upa /xprog
all viable and if cash is short more so
pecky
3rd November, 2010, 11:40 PM
For Astra MK5's & Zafiras the other places you can get it by reading the eeprom with UPA



m35080 within speedo (code is in the ASCII)
TID or BID displays (Code is in the ASCII)
GID or CID (possible to work it out)
CDXX radio (Possible to work it out)

I usually go with what's easiest on the day.
ninja123
4th November, 2010, 08:10 PM
ok, ill buy xprogm and try this way.
BUT once i read dump, how to get pin code from it?
regards ninja
pecky
4th November, 2010, 09:09 PM
ok, ill buy xprogm and try this way.
BUT once i read dump, how to get pin code from it?
regards ninja
This pic is from a TID display, same principal for the BID or the speedo.

Code is 1653
http://img833.imageshack.us/img833/9397/tidcode.jpg

Simple ehh....
ninja123
5th November, 2010, 08:03 PM
Thats great, thanks for that info, Now , wheres the best place to buy xprogm, and also, does anyone know where i can buy mvp/t300 clone with ford europe software in it? I am getting quite a collection of almost identical units after being promised that ford euro is on there when its not.
Many thanks for all your help guys.