varadero 2006 eeprom

[locks85]

ecu 38770-MBT-D51 KEIHIN
Hi i cannot fid the eeprom location for this bike.
Please help
locks85

[MEH]

what would you do with this eprom?

[locks85]

make trasnponder to start motorbike

[Babanovski]

Please post pictures of you are ecu, maybe i can help you.
but i need picture

[locks85]

Ok here are the pictures of varadero ecu

[MASTERLOCK]

ok look this
37353

[locks85]

Dear Sir, thank you for support, i am afraid my ecu is different, in your picture the eeprom is next to some other same size IC
In my second picture you can see something that i read it but the file is not correct, and i written on it RL56 nd a same size IC is located behaind it not next to it, that one i didnt read and its also RL56. Someone told me they both record fault codes, what do you think ?
The shape of ecu is same with yours but part number is differrent.
Can you tell me what is it written on both those 2 ic's standing next to each other in your picture ?

[MEH]

rl56 this 93c56
try to read it in 8bit and 16bit
try to locate pin1
what type of programmer do you use?

[MASTERLOCK]

maybe this is more helpfull




37483

37484

[locks85]

Gia sou file
Hello, actually in my ecy the 2 RL56 were standing one behind the other so one of them was the correct one with key infos.
Now i put everything back and client decided for second key.
I do have honda adding key cable but is 2 pin and under the seat i found one which is 4 pin but both female.
Is there another location for the connector i need in order to add one more key ?

[locks85]

Hello, client called me and says the fuel injection light blinks when turn ignition on and stays still while driving, is that connected to immobilizer ecu ?
I think it has to do with the fact that i first removed the eeprom that keaps the fault codes, i wrote on that another dump with key data by mistake but eventually i put back in the dump with the fault codes.
Now the FI blinks 33 code when the bike is running and i dont know what to do. Please advice
locks85

[locks85]

Hi, is it possible to bridge the missing pads ? Is the eprom containing fault codes

[billysafe]

Anyone knows where is the eeprom of the keys? It isn't in the 2 eeproms L56R (93C56).....

[billysafe]

Tsese are the dumps from the two eeproms lr56

[billysafe]

The 12 dump is the right. Only TANGO could open the dump neither ZEDBULL oR TMPRO could open it. Here is the good dump with the new keys.

[ttzag]

Anyone knows where is the eeprom of the keys? It isn't in the 2 eeproms L56R (93C56).....

hello guys
any one know wich eeprom for key in this ecu ?
i have same ecu with corrupted data for both eeprm