Advice on 2010 Vito Please!!!

[alimmo]

Could someone please confirm if the 2010 vito EZS is the same as new Sprinter/Crafter? and which eep to expect in dash?, also, although i have done nearly all of the cars from the Rosfar R260 list(yes blue clone) so far no probs with it, used over 100 times and i havent actually done a sprinter/vito/Crafetr with it as yet!!

Its just that some people have mentioned having problems with this motor, so my question is! Has anyone made it with the R260? and is it safe. I have also seen 2 slightly different wire ups for the EZS ???

I'm getting the motor in this afternoon so any pre-advice would be gratefully appreciated .

Many thanks in advance and after.

[vageric]

i have done sprinter 2009 and crafter 2008 with blue clone rosfar without any problem.

[alimmo]

Vegeric Quote "i have done sprinter 2009 and crafter 2008 with blue clone rosfar without any problem."


Many thanks for confirming that mate, but can you also tell me if this key module is the same as the new 2010 vito please???

Many thanks again

[vageric]

Vegeric Quote "i have done sprinter 2009 and crafter 2008 with blue clone rosfar without any problem."


Many thanks for confirming that mate, but can you also tell me if this key module is the same as the new 2010 vito please???

Many thanks again


no i can not.

did not have a vito 2010 yet so !!!!!

[alimmo]

thanks Vegeric.

Anyone else please!!!

[autodiags20]

Crafter ezs and Vito ezs different

[alimmo]

Autodiag20 Quotes" Crafter ezs and Vito ezs different "

Many thanks for the pic Autodiag20, now that you have forwarded the pic, using rosfar R260 which doesnt have the vito in the menu is it possible to do this module by selecting another car from the list ????

Many thanks. Ps can you tell me what tool you use for this???.

[diagtech]

Hi pretty sure i used e class menu when i did a late one thanks

[alimmo]

Diagtech Quotes "Hi pretty sure i used e class menu when i did a late one thanks"

"Pretty much doubt that", unless someone else here can enlighten me perhaps please? not that i got anything against you,but my common sense tells me otherwise!! thanks anyway

[autodiags20]

x12 programmer for this i use

[diagtech]

I did use e class 99 per cent sure i was surprised too but wont do any harm to read under that menu and find out

[alimmo]

Doagtech quotes"I did use e class 99 per cent sure i was surprised too but wont do any harm to read under that menu and find out"

Ok mate i suppose theres no harm in trying that, so when i get it in next i'll give it a shot!

PS what wireup did you use was it the same as autodiag20 above pic??

Can any of the Vetrans confirm this please!!!

[alimmo]

Can anyone confirm the above please!!!

[tachonow]

I did use e class 99 per cent sure i was surprised too but wont do any harm to read under that menu and find out
This is a shit info. 211 must have can wakeup on dash.

[TULGEYWOODMAN]

Use the sprinter 2008 option:wavey:

[tachonow]

Use the sprinter 2008 option:wavey:

Where? On Tacho Univershit ?

[TULGEYWOODMAN]

Rosfar, the tacho universal could not do 9s12!
[if it could, the forum would have even more requests for help!]
:wavey:

[markony79]

MB 639
Use the dongle 9s12 http://D:\Milan\Dp3\dok_eng

[markony79]

Hi
how can put the pdf file here????????

[alimmo]

Markony79 says Hi
how can put the pdf file here????????

Press Red button bottom "Post Reply"left of this post, then scroll down to manage attachments and upload please.

[alimmo]

TULGEYWOODMAN thanks for noticing we are talking about the Rosfar R260 and yes the tacho cant do the secured 9s12 although you can do quite a few 9s12's with it.

Ps have you actually done it under the sprinter menu and got the correct value reading back?? I only say this because surely they would have included the name Vito in the menu list as a selling point at least.

Also when i get i will try under the sprinter menu, I dont want to sound lazy or nothing ,but nothing quite like confirmed information before doing the job!!

Many thanks again and look forward to some more input by you people out there please!!!.

[markony79]

Try this, but dont know what machine you use

[markony79]

Sorry , try use 908 cable
I have DP3 and its not same cable like Tacho universal
this pdf is from DP3

[tachonow]

Sorry , try use 908 cable
I have DP3 and its not same cable like Tacho universal
this pdf is from DP3
Mate ! After 2008 Vito have 9s12 mcu in ezs. Your picture is good for cars before 2008.

[TULGEYWOODMAN]

Jesus,
Why do people post when they dont know what they are talking about?

Did a 2010 vito today,used rosfar instead of enigma.[saved files]

use sprinter 2008 as always. no problem.
dont use sprinter pdf though!
:wavey:

[teerak2uk]

Could someone please confirm if the 2010 vito EZS is the same as new Sprinter/Crafter? and which eep to expect in dash?, also, although i have done nearly all of the cars from the Rosfar R260 list(yes blue clone) so far no probs with it, used over 100 times and i havent actually done a sprinter/vito/Crafetr with it as yet!!

Its just that some people have mentioned having problems with this motor, so my question is! Has anyone made it with the R260? and is it safe. I have also seen 2 slightly different wire ups for the EZS ???

I'm getting the motor in this afternoon so any pre-advice would be gratefully appreciated .

Many thanks in advance and after.


Hi Alimmo

where did you get your Rosfar from mate

[alimmo]

Wow! amazing response guys thanks very much indeed for coming back to me, I thank you all and hope i can pull it off.

TULGEYWOODMAN thanks for the confidence, PS would you please confirm if i should use the same pic as post sent by markony79 on this page??? many thanks mate!

Markony79 thanks very much for the pics of the 908 version, but rightly mentioned by "tachonow" I was after the 9s12 2008-

Cheers boys and keep it coming if there is more useful advice!!!

[alimmo]

teerak2uk quotes "Hi Alimmo

where did you get your Rosfar from mate"

From dvd man "want to buy DVD"

[teerak2uk]

teerak2uk quotes "Hi Alimmo

where did you get your Rosfar from mate"

From CD man "want to buy CD"


??????????

[tachonow]

Lets finish all controverse about this car.
Here are all infos about connection for R260 according to X12 picture.
This should be enough to close all...with no more comments.

[z786]

??????????

i think he means the chinese

"wana buy dvd" :D

[alimmo]

Yes I do mean "Chinese" DVD not CD as corrected by z786 mate hope that helps.

[joaopereira]

MB Vito 639 EIS Flash

Hi,

please help me with EIS 639 ..

I need flash to EIS 639 545 21 08 ...

9S12 DT256 CP
0L01Y

Best Regards

[joaopereira]

MB Vito 639 EIS Flash

Hi,

please help me with EIS 639 ..

I need flash to EIS 639 545 21 08 ...

9S12 DT256 CP
0L01Y

Best Regards