Op com, with oldies opel

[ogo777]

hello
if someone knows,
whether op com work with oldies opel car
which have obd1 connector 10 pin,
and protocol 9600 baud
tnx
:wavey:

[rafpucha]

I think You need example this: Vauxhall Opel OPCOM OBD 10 pin to 16 pin Adaptor Cable on eBay (end time 06-Dec-10 20:05:09 GMT) (http://cgi.ebay.co.uk/Vauxhall-Opel-OPCOM-OBD-10-pin-16-pin-Adaptor-Cable-/110583476168?pt=UK_Diagnostic_Tools_Equipment&hash=item19bf49efc8)

[oldford]

ONLY if the same ecu is used in similar cars from 1996/1997 up. Otherwise the protocol may not be detected or the data will be garbage.
Which car/ecu do you have?

[ogo777]

currently have,
vectra a 1991 c18nz
astra f 1995 x16sz
this car dont work with op com
probably op com doesnt work with 9600 baud
only 10400, up
but i m not sure
:hmmmm2:

[oldford]

The baudrate is not the problem. These ecu's are not known to Op-com as they were only used up to 1996.
For the Astra-F Op-com starts in 1997. Vectra-A is not supported at all.

[ogo777]

thank you, mr.oldford
cheers
:wavey:

[paro44]

currently have,
vectra a 1991 c18nz
astra f 1995 x16sz
this car dont work with op com
probably op com doesnt work with 9600 baud
only 10400, up
but i m not sure
:hmmmm2:

Uniscan can do a little bit on these cars (read and clear faults and show live data). Adjustments an actuator test are not posssible. If you don't need more, maybe it is worth trying it.
Look in the pdf: (http://www.digital-kaos.co.uk/forums/f152/visa-1-83-multibootcd-multibootusb-manocao-165650/index3.html#post842977)
But you need special hardware.

[vares]

Opelscanner can do these cars and carlist starts from 1987.

[del635]

Opelscanner can do these cars and carlist starts from 1987.
Also recommend this, very good tool to have along with opcom, a few specail functions as well.