Log in

View Full Version : 4.3e downgrade



shagx
16th November, 2010, 03:38 AM
Right can anyone offer some advise in the way of some instructions/advise to help me downgrade my software modded 4.3e Wii.

Ive got the homebrew channel on whats next

Thanks

ck-ok
16th November, 2010, 07:29 AM
Right can anyone offer some advise in the way of some instructions/advise to help me downgrade my software modded 4.3e Wii.

Ive got the homebrew channel on whats next

Thanks

theres a couple of ways to downgrade try reading here We Hack Wii / Firmware (http://wehackwii.pbworks.com/w/page/8844392/Firmware) make sure you have your nand backup sorted with preloader installed as downgrading is one of the most common causes of bricked wiis,dont try and do this if all the wads on the 4.3 tut didn't load without error.
good luck

MetalKettle
16th November, 2010, 09:05 AM
Right can anyone offer some advise in the way of some instructions/advise to help me downgrade my software modded 4.3e Wii.

Ive got the homebrew channel on whats next

Thanks

Why would you want to downgrade?

ck-ok
16th November, 2010, 05:57 PM
Why would you want to downgrade?

downgrading is useful if you have a chip fitted as it gives you back multi region playback again

happy_highlander
16th November, 2010, 10:23 PM
downgrading is useful if you have a chip fitted as it gives you back multi region playback again
If he has followed the 4.3 mod tut then he could set region free everything in priiloader anyway. Not that I know that much more than I have asked ck-ok to give advice about anyway.

shagx
17th November, 2010, 02:50 PM
Thanks alot im down to version 4.1E :)
Next on my task is usb loader....

Right I have usb loader gx working fine :)

Im struggling to get Wiiflow working I get the list of games up with my covers etc but the thing is when I select a game it just hangs at please wait, I cant see whats wrong here been on this for hours has anyone got any ideas.

Im using the same working hard drive as usb loader gx

Cheers

MetalKettle
17th November, 2010, 03:01 PM
Thanks alot im down to version 4.1E :)
Next on my task is usb loader....

Right I have usb loader gx working fine :)

Im struggling to get Wiiflow working I get the list of games up with my covers etc but the thing is when I select a game it just hangs at please wait, I cant see whats wrong here been on this for hours has anyone got any ideas.

Im using the same working hard drive as usb loader gx

Cheers

How is your HDD formatted and partitioned? Wii flow had some problems with 2 WBFS formatted partitions.

shagx
17th November, 2010, 03:18 PM
its just a single formatted drive as WBFS with no partitions

MetalKettle
17th November, 2010, 03:24 PM
its just a single formatted drive as WBFS with no partitions

Which CIOS are you running and which versions/bases?

shagx
17th November, 2010, 04:45 PM
This is something im not sure on as when i load up hackmii installer i get a screen advising me there is no vulnerable IOS installed on this Wii.

I have ran through the procedure here and still no go
http://sites.google.com/site/completesg/other-stuff/fix-hbc

ck-ok
17th November, 2010, 06:42 PM
This is something im not sure on as when i load up hackmii installer i get a screen advising me there is no vulnerable IOS installed on this Wii.

I have ran through the procedure here and still no go
http://sites.google.com/site/completesg/other-stuff/fix-hbc

did you follow and install all the wads from 4.3 tut?
have you installed darkcorpe?

shagx
17th November, 2010, 07:04 PM
?Hi thanks for assisting,

I have downgraded from 4.3 to 4.1 and no I havent installed darkcorp (at least i dont think i did being a newbie)


Cheers

Neil

ck-ok
17th November, 2010, 07:43 PM
?Hi thanks for assisting,

I have downgraded from 4.3 to 4.1 and no I havent installed darkcorp (at least i dont think i did being a newbie)


Cheers

Neil

did you install all the wads from 4.3 tut?

shagx
17th November, 2010, 08:23 PM
yes, followed the tutorial all the way through but since then i have been replacing wads trying to get it going

ck-ok
17th November, 2010, 09:36 PM
yes, followed the tutorial all the way through but since then i have been replacing wads trying to get it going

for wiiflow installation try here WiiFloWiki (http://sites.google.com/site/wiiflowiki/)
as for non vunerable iso try this

shagx
18th November, 2010, 09:56 AM
Hi thanks for that im back into hackmii the above worked like a treat sorting out the non vunerable issue.

Still no further with wiiflow though. Still just hanging on the please wait..
im running wiiflow version v2.2 r254
and ios 249 v20 (57)
guess thats ok...?

shagx
18th November, 2010, 04:11 PM
done it im past the line :)
now at 4.1e with a fat32 drive working and all the loaders work too. It would seem i corrupted the cios somewhere after redoing that again it all sprang into life

ck-ok
18th November, 2010, 07:14 PM
done it im past the line :)
now at 4.1e with a fat32 drive working and all the loaders work too. It would seem i corrupted the cios somewhere after redoing that again it all sprang into life

great, glad your up and running