39e help

[calhib]

when i on 39e i am trying to load channels from the bulsat package and i am getting the service could not be found message on all the bulsat channels even tho i am getting 80% + signal anybody know why this is thanks calhib

ps this is on a dm500s

[Mjolinor]

80% is not generally enough.

[dick b]

there has been a key change new keys not out yet.
is the 80% just on snr or agc as well as 80%agc should be more than enough.

[opsmonkey]

where abouts are you and what is your dish size mate..?

on a 1m in London I'm getting 99% snr and 93% agc on the Bulsat package with a 500s

[Manic01]

80% is not generally enough.

Balderdash!

[calhib]

im in manchester and have a 80cm sory i had read it wrong it was snr 68% and agc 88%

[opsmonkey]

what transponder are you trying..??

[calhib]

the channels i was trying to receive are btv cinema nova sport and diema

[opsmonkey]

have you tried a manual transponder scan on the following freq:

12647 H 30000 7/8

[calhib]

have tryed that but got nothing from it

[opsmonkey]

nothing as in no services or nothing as in no signal..?

[calhib]

no services

[opsmonkey]

you should be getting Bulsat with an 80cms dish.. I know of people getting it with a 60cms in Lincoln..

have you tried a full rescan..?
has your dish been blown at all in the high winds lately..?
any other tuner problems..??

[calhib]

do you mean a full rescan on 39e or all satellites because i have just done 1 on 39e
and everything else is working fine apart from i couldnt get das ereste on 19.2 for the boxing on saturday

[opsmonkey]

so on 39e you are getting everything bar the whole Bulsat package and on 19E you cant get das ereste..

sounds like you may have some transponders missing on your satellites.xml file to me

[calhib]

all the channels are there they just wont load

[opsmonkey]

load..???

what does it say when you choose the channel you want..??

If it says "Service Could Not Be Found" then it means it's not getting a satellite signal.. no signal means no lock on the transponder.. no lock may mean the transponder is missing..

especially if you are using a bouquet that you didn't make or edit yourself

[calhib]

yes it does say "Service Could Not Be Found" what should i do then

[Manic01]

This happens for example if you load a channel list with 4.8east in xml and you have 5east in your set up.
Both need to be the same.

[calhib]

how do i change that please

[opsmonkey]

First of all you need to find which is showing 4.8 and which is showing 5

[standarren]

First of all you need to find which is showing 4.8 and which is showing 5

this is interesting to me also guys i have installed a sats xml from satellites.xml generator / transponder .ini generator (http://satellites-xml.eu/)
but would like to delete the ones in the dreambox because i've noticed that 0.8w is also 1.0w

[opsmonkey]

if you FTP your downloaded Satellites.xml file over to your box it will replace the current one stored in your box...

so whatever is in your downloaded file will now be in your options when choosing a satellite...

you need to make sure your bouquets reflect the same settings as explained above

[standarren]

if you FTP your downloaded Satellites.xml file over to your box it will replace the current one stored in your box...

so whatever is in your downloaded file will now be in your options when choosing a satellite...

you need to make sure your bouquets reflect the same settings as explained above

so delete the old channels then rescan then add them to bouquets thanks mate

[opsmonkey]

No mate.. just make sure your bouquet settings are the same as you satellite settings...