DRS 6 and DDEC V files

[Juanincho]

Anybody have files (calibrations) for DDEC V to install in DRS 6 ? Thanks for sharing !:wavey:

[jabkissmya]

Anybody have files (calibrations) for DDEC V to install in DRS 6 ? Thanks for sharing !:wavey:
engine serials?

[Juanincho]

06R0810415
06R0795570
06R0807355
06R0734321
06R0812379
06R0858298
06R0858345
06R0790377
06R0799568
06R0833576
06R0800025
:champions:

[jabkissmya]

you may need to upgrade to a newer version of drs depending on which one you have, so i have included drs 6.16

just extract folder to c:\detroit diesel and copy/merge/overwright files as needed.

when you run drs it will tell you it is being upgraded and shut back down, this is just giving you the new server updates to install new ecm versions. Click program, if truck does not have a matching serial to whats on you list, it will let you select from a list what you want to program and you should see all serials you listed plus 06R1999999. this is the turbo actuator program for use with dddl 6.44 and higher. save all accumulated data before programming. as it might loose all accumulated data during reprogram.

[Texas149]

I got it going thanks

[Juanincho]

I need the program file for a seies 60, engine serial# 06R0324268 ecm soft verson 32.08, 430 hp I was going in to change ecm inputs for cruise and accidentally hit update calibration at DDC instead and now ecm is in boot mode! Please help!

Just to be sure, it is a 6067GK60 engine? Download some other serial number then use dct to change sengine serial number, max rpm and so on. :wavey:

[jabkissmya]

so i take it all worked correctly?

[Texas149]

how do we import cal files into drs?

[Juanincho]

I can't get drs 6.16 work on win 7, I'll try on winxp. :boring:

[jabkissmya]

how do we import cal files into drs?

copy folder as i specified in post, drs will pick it up when you go to program an ecm.

[jabkissmya]

I can't get drs 6.16 work on win 7, I'll try on winxp. :boring:

been working on wondows 7 for me, not designed for it, so may have to run in compatibilty mode for some versions.

[jabkissmya]

for those of you using the drssec.dll fix, do not use that, that is an old parallel crack and does not work with this version. go to a topic that states ddrs help, i have posted a link to sentinelkeyw.dll, copy and replace. that is a usb engineer crack.

her is thread : http://www.digital-kaos.co.uk/forums/f166/ddrs-help-72650/index3.html

[Texas149]

working on xp for me

[Juanincho]

Thank you very much ! Everything is fine now Working in both winxp and win7. Great job !:champions:

[peter21]

thank you sooo much buddy, working fine on xp sp3....:congrats::congrats::thrasher::top:

[makura]

Hi guys
I am looking for a cal file for serial number 06R0776795 ddec 5 to calibrate using ddrs

[jabkissmya]

to make it easier on me, as cals are requested, i am just going to add to origional rar file to keep from having to go through and spend a lot of time hunting down the recently downloded files.

[makura]

to make it easier on me, as cals are reauested, i am just going to add to origional rar file to keep from having to go through and spend a lot of time hunting down the recently downloded files.
good looking out m8,thanks a million and keep up the good work!!!!!!

[alexxcool]

good work!!!!!!

[ukge4122]

Hi Guys,

I am looking for a Calibration / Flash File for a Detroit 60 Series Engine

Engine Series 60
Engine Serial # 06R0649874
Engine Model 606MK60

All help is greatly appreciated, and thanks again

Regards:wavey:

[jabkissmya]

Hi Guys,

I am looking for a Calibration / Flash File for a Detroit 60 Series Engine

Engine Series 60
Engine Serial # 06R0649874
Engine Model 606MK60

All help is greatly appreciated, and thanks again

Regards:wavey:
added to it

[peter21]

Hi friends, I'm looking for a calibration for ECM DDEC IV Serial Number 06R0686821 Model Engine 6063HK35 Genset Applications...... thanks in advanced. :thrasher:

[jabkissmya]

Hi friends, I'm looking for a calibration for ECM DDEC IV Serial Number 06R0686821 Model Engine 6063HK35 Genset Applications...... thanks in advanced. :thrasher:
added to it

[rudamie]

jabkissmya,

Thanks for all your good work in this thread. It's very helpful Woot Woot Share ON......!:congrats:

[peter21]

jabkissmya, thank you soo much buddy..... :congrats::top::wavey:

[dieselman77]

Can someone help me please ? I am wondering about reprogramming a ddec ecm can you plug into the dash plug to reflash the ecm or do you need to make a special cable ? thank you

[jabkissmya]

Can someone help me please ? I am wondering about reprogramming a ddec ecm can you plug into the dash plug to reflash the ecm or do you need to make a special cable ? thank you


the answer is both, you can plug into the trucks datalink and program an ecu, but is better if you have the bench cables, as better success rate, the only exception is mbe engines you have to have the cables to program. what ecu are you programming?

[dieselman77]

i want to reprogram a ddecV ecm to 515hp@1200 rpm and i think it was 1650 ft lbs torque i have not tried it yet i just want to make sure when i do it do it the right way i have bench cables for cat , cummins but no detroit thank you

[diagnosss]

Hi friends! jabkissmya, thank you so much! GREAT work for us!!
i need calibration files for S\N 06R0801865 and 06R1999999 (turbotest sw)
hope on your help

[torqueman]

HI ALL,
CAn sombody please provide calibration file for engine serial # 06R0750912.

Greatly thanks.
I want it so badly.

[jabkissmya]

i want to reprogram a ddecV ecm to 515hp@1200 rpm and i think it was 1650 ft lbs torque i have not tried it yet i just want to make sure when i do it do it the right way i have bench cables for cat , cummins but no detroit thank you

just find a cal from a ddev 5 engine that has already been upgraded to that rating and create a new cal for your serial number with ddct.

[jabkissmya]

added

06R0801865
06R1999999
06R0750912

[makura]

Good work guys
Just wanted to ask if it is possible to check a calibration's horse power,torque and rpm with out it being put in the ecm?if so can i have a step by step of doing this.

[torqueman]

added

06R0801865
06R1999999
06R0750912

Dear Jab,
Thanks for file but when i try to programme the ecm I cannot find the engine serial # i requested i:e 06r0750912.

Can you please guide me how to trace it and programme it.

thanks and keep it up man.

[bnolann]

jabkissmya (http://www.digital-kaos.co.uk/forums/members/98632-jabkissmya/) could you pleas add 06R0242962
thanks
bnolann

[jabkissmya]

Dear Jab,
Thanks for file but when i try to programme the ecm I cannot find the engine serial # i requested i:e 06r0750912.

Can you please guide me how to trace it and programme it.

thanks and keep it up man.


does it show you a list of serials?

[Juanincho]

Good work guys
Just wanted to ask if it is possible to check a calibration's horse power,torque and rpm with out it being put in the ecm?if so can i have a step by step of doing this.

I use the DD parts catalog, at least, it shows the engine model (gk, mk, etc) to have an idea of what kind of engine it is. If somebody needs it, http://rapidshare.com/files/384375871/DDEC_Parts.rar Enjoy!:wavey:

[makura]

need cal for engine 06R0730122 it has no jack brakes on it.

[jabkissmya]

need cal for engine 06R0730122 it has no jack brakes on it.
what are you wanting cal for? to put jakes on?

[makura]

does it show you a list of serials?
Yes it give me the list of serial,but with out the exact serial i am sure you can use a different serial with the same features and parameters.so when i connect to the truck i want to know which cal i can use besides the exact serial that i would probable won't be having.

[jabkissmya]

added new cal

[makura]

what are you wanting cal for? to put jakes on?bust ecm,need to replace it

[jabkissmya]

bust ecm,need to replace it
cal file above you in the previous post

[torqueman]

does it show you a list of serials?
Ya It shows a list but cannot find my engine # 06r0750912.
Bro I have a question that do i have to put the files you send me in CAL or UNIT ? because when i put these files in cal it does not show me anything while i open Drs.I think I need some unit #.

[jabkissmya]

Ya It shows a list but cannot find my engine # 06r0750912.
Bro I have a question that do i have to put the files you send me in CAL or UNIT ? because when i put these files in cal it does not show me anything while i open Drs.I think I need some unit #.
files are in correct folders in rar file

[hercamp]

Ya It shows a list but cannot find my engine # 06r0750912.
Bro I have a question that do i have to put the files you send me in CAL or UNIT ? because when i put these files in cal it does not show me anything while i open Drs.I think I need some unit #.


to use that open drs and the cal you need use copy and past cal,unit data, folders in reprogram.sistem folder.thats all.

[torqueman]

to use that open drs and the cal you need use copy and past cal,unit data, folders in reprogram.sistem folder.thats all.


THANKS hERCAMP AND LOVELY PICS AT BOTTOM:bandit::champions::eating:

[Juanincho]

Hi m8s, I need 06R0606366, 6067HK60 (No EGR !) 575 HP 2110 RMP 1850 LbFt. :wavey:

[jabkissmya]

Hi m8s, I need 06R0606366, 6067HK60 (No EGR !) 575 HP 2110 RMP 1850 LbFt. :wavey:


here you go

[bnolann]

Hi M8 any word on reprogramming engine SN# 06R0242962
Thanks

[trucks]

Hi
Could I have cal for ESN 06R0209317 please? It is a 470hp 6067GK60 Thanks

[jabkissmya]

last two requested added.

[diagnosss]

Hello friends!
I need cal-files for 06R0761170, 06R0759799, 06R0747313, 06R0732605, 06R0734839, 06R0716331
Thanks

[jabkissmya]

Hello friends!
I need cal-files for 06R0761170, 06R0759799, 06R0747313, 06R0732605, 06R0734839, 06R0716331
Thanks
please from now on list like so

06R0761170
06R0759799
06R0747313
06R0732605
06R0734839
06R0716331

[truckandrei]

Thanks Jabkissmya!

[makura]

need cal for engine 06R0730122 it has no jack brakes on it.
Hi guys
i seem to be having a bit of a problem with the cal file that i was given here,i dont know if its the cal file or some problem eals were.
When calibrate my truck using the cal file 06R0730122,the truck starts fine but the accelarater is dead,i cant accelarate the pedal is just dead but no fault codes.if i try a differrent cal file i can accelarate but then i get engine brake open fault codes.by the way this truck does not have engine brake fitted on it.
could this be the cal file or what?
Thanks in advance and keep up the good work :congrats:

[jabkissmya]

Hi guys
i seem to be having a bit of a problem with the cal file that i was given here,i dont know if its the cal file or some problem eals were.
When calibrate my truck using the cal file 06R0730122,the truck starts fine but the accelarater is dead,i cant accelarate the pedal is just dead but no fault codes.if i try a differrent cal file i can accelarate but then i get engine brake open fault codes.by the way this truck does not have engine brake fitted on it.
could this be the cal file or what?
Thanks in advance and keep up the good work :congrats:
yes its the cal file, because it is not for engine you are using, just change the inputs and outputs to what they need to be, may need to use ddct to change some of them.

[Juanincho]

yes its the cal file, because it is not for engine you are using, just change the inputs and outputs to what they need to be, may need to use ddct to change some of them.

I guess there is an option to lock the throttle pedal, but I dont remember if it is on drs, dct or dddl. I'll check it. Makura, check if the cal includes an idle validation switch.

[makura]

I guess there is an option to lock the throttle pedal, but I dont remember if it is on drs, dct or dddl. I'll check it. Makura, check if the cal includes an idle validation switch.
well i am using a cal according to the engine number so it has to be the right cal.
The pedal does not have a validation switch,just has three wires going to the pedal.

[jabkissmya]

well i am using a cal according to the engine number so it has to be the right cal.
The pedal does not have a validation switch,just has three wires going to the pedal.
what you need to do, is program the one you said give you throttle and copy all inputs and parameters (write them down), then program correct one and see what difference is.

[makura]

Hi
Got it going at last,had to disable aux out put H2 and the accelarator came to life.

[jabkissmya]

Hi
Got it going at last,had to disable aux out put H2 and the accelarator came to life.

:congrats:

[makura]

:congrats:
:thefinger:
Thanks for all the help mate :champions:

[jabkissmya]

:thefinger:
Thanks for all the help mate :champions:
your welcome :bandit:

[Juanincho]

OK makura you're welcome:champions: (P.S. :Don't rely on esn only, sometimes the engine has been changed from another truck (specially if changed to or from an inter cab to freigh or peterbilt cab) , so the best way to have it working is to check the truck directly, I mean, check the truck if everything works after a cal, )

[jabkissmya]

OK makura you're welcome:champions: (P.S. :Don't rely on esn only, sometimes the engine has been changed from another truck (specially if changed to or from an inter cab to freigh or peterbilt cab) , so the best way to have it working is to check the truck directly, I mean, check the truck if everything works after a cal, )
True and as well, most cals are put on server before engine ever gets put in truck, so parameters usually aren't 100 percent correct. Most dealers are suppose to update to server so that it gets corrected, but it doesn't happen.

[makura]

Ok guys,point noted,but i always use the number engraved on the engine block its self,any way i am not that good with ddecs but i am slowly getting there,i am a cummins guy.

[jabkissmya]

Ok guys,point noted,but i always use the number engraved on the engine block its self,any way i am not that good with ddecs but i am slowly getting there,i am a cummins guy.
well we are not saying not to use the serial number for engine, just that you always have to recheck and assume parameters might not be correct.

[Juanincho]

well we are not saying not to use the serial number for engine, just that you always have to recheck and assume parameters might not be correct.

I agree m8 ... simply sometimes using the actual esn doesnt mean you wont have any trouble. Greetings.:party:

[peter21]

hi buddy i need you help again...... i need calibration for serial number 06R0340244.

Thanks in advanced....

[duhuu]

Hello
I need to icall 06R0758932

[trucks]

Hello,
Could I have cal for 06R0961955 please?
Thanks in advance

[jabkissmya]

Last 3 requests added, sorry for long wait, had family buisness to tend to.

[peter21]

Last 3 requests added, sorry for long wait, had family buisness to tend to.

thank you buddy....... :top::top:

[Underpsi]

Hey guys,
not sure if im doing something wrong here I have DRS 6.16 and when I try to open It says I need a password. See attached

thanks

http://img522.imageshack.us/img522/7433/52126793.png

[jabkissmya]

Hey guys,
not sure if im doing something wrong here I have DRS 6.16 and when I try to open It says I need a password. See attached

thanks

http://img522.imageshack.us/img522/7433/52126793.png
Check post 12!

[Underpsi]

I didn't realize that was for the same problem.

Now I have another issue though. That message is now gone but when I click on it to open it the Detroit window that always pops up when they are loading, pops up but for less than 2 seconds and then it just goes away and never loads:hmmmm2:

[Emgo]

I didn't realize that was for the same problem.

Now I have another issue though. That message is now gone but when I click on it to open it the Detroit window that always pops up when they are loading, pops up but for less than 2 seconds and then it just goes away and never loads:hmmmm2:

That happened to me when installing DDRS / DDRS on a laptop with Windows 7. It works fine on my other laptop with Windows XP. It may not work on Windows 7.

[Underpsi]

That happened to me when installing DDRS / DDRS on a laptop with Windows 7. It works fine on my other laptop with Windows XP. It may not work on Windows 7.

The laptop im using is Windows XP with windows sp2 as ive heard of people having problems with sp3.

[jabkissmya]

I didn't realize that was for the same problem.

Now I have another issue though. That message is now gone but when I click on it to open it the Detroit window that always pops up when they are loading, pops up but for less than 2 seconds and then it just goes away and never loads:hmmmm2:
reinstall drs, then use only the crack in post 12, do not modify drssec.dll.

[diesel88]

Hi m8s, I need cal for engine 06R0757368, 6067MV6E
Thanks !

[Underpsi]

reinstall drs, then use only the crack in post 12, do not modify drssec.dll.

Tried that couple times, copied the file for DRS6 and its still doing the same. Tried restarting and same thing yet.

[makura]

you have to copy it toC:/programfiles/detroit diesel/detroit reprogramming. not just c:/detroit reprogramming.

[Underpsi]

you have to copy it toC:/programfiles/detroit diesel/detroit reprogramming. not just c:/detroit reprogramming.

Ya thats what I did, still no luck.

[ECM specialist]

Ya thats what I did, still no luck. hello , look like you haveing problem with you drs
how can I help you with ???

[ECM specialist]

are you ther??

[Underpsi]

hello , look like you haveing problem with you drs
how can I help you with ???
As long as your not trying to sell me something. If you look back a few posts in the thread you will see the issues im having with opening DRS.
Thanks

[peter21]

hi buddy, try unninstalling DRS, then clean the registry with the program CCleaner, restart the pc and reinstall DRS

[Underpsi]

hi buddy, try unninstalling DRS, then clean the registry with the program CCleaner, restart the pc and reinstall DRS

Whats a program cleaner that would be good to use? I've never used one before. Maybe something from trying the old crack file is still there...

[diesel88]

hi buddy, try unninstalling DRS, then clean the registry with the program CCleaner, restart the pc and reinstall DRS

After clean the registry with CCleaner ( u can search on google), restart ur pc and download other DRS setup file. Then reinstall. Maybe DRS setup file on ur pc erro - try again with another.

[diesel88]

I need cal for engine 06R0757368
Help me, please !!!

[trucks]

Hello,could I have cal for 06R0212932 please? Thanks in advance

[duhuu]

hello
I need cal engine 06R0385263
model 6067GK60
thanks in advance

[gamgam]

hello
I need cal engine 06R0479524
model 6067MK60
thanks in advance

[pbateman]

Need help with ddrs 6.14 is there a crack out the for it im running windows 7 and have tried the different files off of here and it keeps telling me i have an invalid key and gives me an 800 # for assistance any help would be appreciated thanks in advance:help:

[Juanincho]

Need help with ddrs 6.14 is there a crack out the for it im running windows 7 and have tried the different files off of here and it keeps telling me i have an invalid key and gives me an 800 # for assistance any help would be appreciated thanks in advance:help:
Read this thread from its beginning and you'll find out the info you need. :ciao:

[kimoe]

Hi jabkissmya , can i get a cal file for this ESN:06R0611456

Thanks in Advance, (http://www.digital-kaos.co.uk/forums/members/98632-jabkissmya/)

[Lickety Split]

Good day Sir,could you please post cal for the following engine?
I am using DDCT,but also have DDDL and DDRS.
DDCT is looking for what they call "metafiles"

1998 Series 60 500HP DDEC IV

Model # 6067GK60
Serial # 06R0382621

I assume you are downloading these from the detroit mainframe? is it possible to tell the date that they were uploaded to there?

Looks as if this will be the only way i can get these files so,thank you in advance.

[12345678910]

Good day Sir,could you please post cal for the following engine?
I am using DDCT,but also have DDDL and DDRS.
DDCT is looking for what they call "metafiles"

1998 Series 60 500HP DDEC IV

Model # 6067GK60
Serial # 06R0382621

I assume you are downloading these from the detroit mainframe? is it possible to tell the date that they were uploaded to there?

Looks as if this will be the only way i can get these files so,thank you in advance.

wrong thead need to go to caltools theard there posted there

[Lickety Split]

as far as i can find,this is the only thread that has specific cals for different models...i dont need a generic file,i need the one for my engine...hence the reason we post our model and serial numbers...

[pbateman]

Need access key for for pc id d7 33 54 C5 ddrs 7.03 access key thanks in advance:goodpost::hello:

[duhuu]

I need help to file for cal 06R0385263
thank you for this help

[gagne]

its possible to change ecm version and put diferent calibration

[trucks]

How do you do that?

[Lickety Split]

still looking for the calibration files for this engine...thanks for any help.

Series 60 DDEC IV
Model # 6067GK60
Serial # 06R0382621

[Belefronte]

I need calibrations possible with 500HP

ESN:
06R0751662
06R0722683

Both with neumatic EGR

[Emgo]

If you need the cal file for DCT take a look at post 368 in the detroit calibration tool thread. There is cal 500 HP DDEC V. If it helps says thanks to jabkissmya

[educar21]

Good day fellow forum is very interesting but I could not achieve to get the files for use with the drs

you may need to upgrade to a newer version of drs depending on which one you have, so i have included drs 6.16

just extract folder to c:\detroit diesel and copy/merge/overwright files as needed.

when you run drs it will tell you it is being upgraded and shut back down, this is just giving you the new server updates to install new ecm versions. Click program, if truck does not have a matching serial to whats on you list, it will let you select from a list what you want to program and you should see all serials you listed plus 06R1999999. this is the turbo actuator program for use with dddl 6.44 and higher. save all accumulated data before programming. as it might loose all accumulated data during reprogram.

[educar21]

buen foro los felicito por muy buen tema

[Poptest]

I agree m8 ... simply sometimes using the actual esn doesnt mean you wont have any trouble. Greetings.:party:

You are right. I am seeing this problem now on a ddec IV. I was trying to edit inputs and outputs but ddrs6.16 was asking for a password.

Is there a way around this so that I can send new parameters to the ECM?

thanks.

[Emgo]

You are right. I am seeing this problem now on a ddec IV. I was trying to edit inputs and outputs but ddrs6.16 was asking for a password.

Is there a way around this so that I can send new parameters to the ECM?

thanks.


If you have DCT take look at sptecnico82's method of getting or changing the passwords. To me it's the easy way. Go to the DCT thread and start reading around post 349. Say thanks to sptecnico82 if it helps.

[makura]

Hi guys

i need cal file for ddec 4 engine number 06R0724498
Thanks in advance.

[g0ne3]

which program is used to disable optimized idle? i tried on ddrs but im not allowed to change the option would dct work for that?

[peter21]

hi buddy, the optimized idle can be disabled with DCT, look in DCT post.

[g0ne3]

thanks! i will do that

[makura]

Hi guys

i need cal file for ddec 4 engine number 06R0724498
Thanks in advance.
Still need this file guys,HHHHHHHHHHHHHHELP.....:hello:

[CESARIN]

good afternoon.

someone have drs 6.10 crack?

[peter21]

Still need this file guys,HHHHHHHHHHHHHHELP.....:hello:


hi buddy, try to download another similar calibration with DCT, then setting the input-output and engine number.....

[gagne]

its possible to recalibrate dd15 with dct where i can download metafiles for dd15 thanks all dk

[gagne]

do you have ddrs 7.06 where y can download this

[mentos]

good afternoon.

someone have drs 6.10 crack?

DRS 6x crack : http://rapidshare.com/files/453504549/DRSSec.rar

pm for password

Enjoy !:sheep:

------------------------------------------------

Don't forget click Thanks button !!!

[Max712]

Hi guys. Need cal file for 06R0682238 6067TK6K.
I can anyone help with this?
Thanks in advance.

[hungvi2004]

added

06R0801865
06R1999999
06R0750912


dear

while I extract this file to "c/detroit/DDEC Reprogramming System" folder. I can not see cal file or unit file. it automatic deleted.

please see attached picture & give me advise to solve it. thank you!

56100

56101

[jabkissmya]

sorry for disappearing, had a lot of #### going on i had to take care of.


new requested cals
http://rapidshare.com/files/455872051/test.rar

[jabkissmya]

do you have ddrs 7.06 where y can download this

wont do you ant good, haved to register with online id, better to find dddl 7.06

[conghp]

where you can justify the crack was not ddec v

[trucks]

Can I beg for cal for 06R0595633 please?
Thanks in advance

[ddmech]

Would any one have cal for 06r0678444?Need it badley,Thanks!

[bnolann]

need this one bad 06R0135719 model 6067WU60
thanks

[jabkissmya]

new serials added
http://rapidshare.com/files/456209297/test.rar

[ddmech]

thanks a lot. thanks button wouldnt work!

[Lickety Split]

still looking for this one...model-6067GK60 serial#-06R0382621
98 model DDEC IV

thanks in advance

[jabkissmya]

still looking for this one...model-6067GK60 serial#-06R0382621
98 model DDEC IV

thanks in advance
added new serial

[diesel88]

Thanks jabkissmya verymuch for your help! It is very useful

[Lickety Split]

added new serial

thanks for the quick reply,but,what program is this used with? Sorry,i should have said that i am using DDCT...none of the files in your post are usable in DDCT,unless i am doing something wrong.

What i am looking for is the setup files,or metafiles for my engine.

98 DDEC IV series 60
mod...6067GK60
ser...06R0382621

this was originaly at 500hp/1650ftlbs...but i want to try it at 600hp/1850ftlbs...most guys say just go in and change the hp and torque,but i would think that you must have the proper fuel maps to backup those settings,also BOI settings would come into play too...or am i way off base here?

Any help would be greatly appreciated. Thank You and keep up the great work.

[trucks]

the files jabkissmya is sending us are for use with ddrs you cant use them with ddct until you use ddrs and convert them

[Lickety Split]

the files jabkissmya is sending us are for use with ddrs you cant use them with ddct until you use ddrs and convert them

ok,i tried to open them in ddrs too,but couldnt figure it out...i dont use ddrs very much,any help here would be great,hint hint.

[Emgo]

ok,i tried to open them in ddrs too,but couldnt figure it out...i dont use ddrs very much,any help here would be great,hint hint.

Here's what I have to do. I open DRS then go back to c: Detroit Diesel / Reprogramming then copy & paste in the cal and unit files from jabkissmya.

If I put them in before I open DRS most or all of the files disappear and they disappear after I close DRS. I'm not sure what I'm doing wrong. I have tried several things and it's always the same result. What I'm doing works but it seems the files should stay there.

Emgo

[hercamp]

If you only paste cal/data/unit into C"detroitdiesel/reprogXXXXX......thats all...but in some calibrations files you can keep for 30 days ..thats all about of the date that they have been downloaded....if you put that cals into your sistem for a first time they will happear for a next 30 days but after that you will need put one ..and another time..is normal.

[Emgo]

If you only paste cal/data/unit into C"detroitdiesel/reprogXXXXX......thats all...but in some calibrations files you can keep for 30 days ..thats all about of the date that they have been downloaded....if you put that cals into your sistem for a first time they will happear for a next 30 days but after that you will need put one ..and another time..is normal.

I thought it was something I was doing or something about my computer. Thanks hercamp for explaining.

Emgo

[Emgo]

I would like to know the definition of the file types used in DRS DDRS. What is their function?

Cal files, Unit files, Map files and Software??

And a special thanks to jabkissmya for taking the time to get us the files.


Thanks,
Emgo

[amishmafia00]

jabkissmya,
can you get a calibration for serial number
06R0955240

thanks

[ddmech]

I have tried to load every different cal file on these posts but cannot get drs to recognise them.I have installed on 3 different pcs but same problem.Had them working on first one then it went down and no luck since.When I paste files in drs it shows they are there in files but drs wont read them.One thing though my units are transfering but when I go to files it says they are empty.Any help would be greatly appreciated!Thanks!

[torqueman]

I have tried to load every different cal file on these posts but cannot get drs to recognise them.I have installed on 3 different pcs but same problem.Had them working on first one then it went down and no luck since.When I paste files in drs it shows they are there in files but drs wont read them.One thing though my units are transfering but when I go to files it says they are empty.Any help would be greatly appreciated!Thanks!


First check it out where is your DDEC reprogramming system folder in C drive "detroit Diesel". probably----- C:\Detroit Diesel.

Then Open DRS and leave it opened.

Then copy your CAL files and paste it into ----C:\Detroit Diesel\DDEC Reprogramming System\Cal.

Same as copy and paste UNIT files to --------C:\Detroit Diesel\DDEC Reprogramming System\unit.

Then go to DRS and start with programme ecm and press ok, you will find all engine serial numbers in a row. follow it and it should work.

if you have any prob , pm me

[alsop]

I am trying to find cals for three engins

04R0016054
04R0035131
04R0047807

Thanks in advance

[ddmech]

Problem solved!Drs working great.I have been fighting this for 2 weeks.I want to thank everyone that has tried to help and given advice in the last few days.I appreciate it!
Troy

[elslow]

can some one please help me with cal unit 06R0305121
thank you in advance

[jmb]

Hi, need cal for 06R0148700 it's a DDEC III

Thanks

[Texas149]

Anyone have this cal for DDEC V S/N 06R1999999? It is used to calibrate The turbo actuators on egr engines

[ddmech]

jabkissmya has posted it earlier in this thread.I have tried to use it but ,my drs says there is something wrong.Cant remember the code but it was something about wrong fuel settings.It would be great if someone could repost or tell me what is wrong with mine.I have needed it also.

[jackalfa]

Please jabkissmya, can you help with calibration 06R0827903
model 6067BK62?

Thanks ain advance...

[jackalfa]

Please somebody can help me with the calibration.

Thanks

[ddmech]

If it is just a bk 500 hp,you can look through the cals posted on this thread and find one that will work.I have some cals I have saved but nothing for that exact ser #.I mix and match a lot.Just check your ser and part #s for same camshaft,injectors,ect. and it should work.Might have to to change your input/outputs to match.

[transinter]

I have a truck look
but I can not move because this parameter with the ECM password
I remove the password
ANYONE KNOW HOW TO REMOVE THE PASSWORD

THANKS FOR THE HELP

[Emgo]

I have a truck look
but I can not move because this parameter with the ECM password
I remove the password
ANYONE KNOW HOW TO REMOVE THE PASSWORD

THANKS FOR THE HELP

You'll need DCT. Take a look at sptecnico82's method of getting or changing the passwords. To me it's the easy way. Go to the DCT thread and start reading around post 349. Say thanks to sptecnico82 if it helps.

Emgo

[apielectronics]

hello all thanks for all the useful info but i have ddrs6.46/7.0x on my comp can i also install drs 6.14 thanks in advance

[apielectronics]

can some one post part1 and part2 of the drs download as im getting an error says that it cannot be read from the server maybe the link is down thanx a million:pcguru:

[joshuasv]

help me with the following "calibrations" please



06R0172921
06R0606673
06R0473017

[diesel88]

Jabkissmya!
Help me with cal file
06R0888676
Thanks in advance!

[angelpe]

mepodrian ayudar con unas calibraciones para motores estacionarios de ditroid diesel estos son los # de motor 06RE116997 06RE116872 GRASIAS

[harobaua]

Good night, and I have the program installed and calibration files of Detroit, the problem is not how to use it, my request is to increase engine horsepower Freightliener and Kenworth trucks.

I need to know which file to use seeing horsepower, rpm, torque, etc.

Be held in Cummins and Caterpillar perfect, thank you help me to do well in Detroit.

Thanks,

[ddmech]

The problem with detroit is the serial numbers dont tell what they are like a cat or cummins.You can convert each one to dct and it will tell you this but it is a slow process.With dct you can change anything you want just use moderation until you learn what you are doing.I only use drs to burn blank ecm.Then I use dct to change what I want.

[harobaua]

Good afternoon,

jabkissmya: Friend, I need your help to locate the file 06R0830535.

ddmech: Friend, I have the dct program and understand that it must change the rating. Do you have any manual or suggestion to change the horsepower.

Thank you very much,

[Lickety Split]

Good afternoon,

jabkissmya: Friend, I need your help to locate the file 06R0830535.

ddmech: Friend, I have the dct program and understand that it must change the rating. Do you have any manual or suggestion to change the horsepower.

Thank you very much,


just a thought,but i just found this in another thread...but come to think of it,i think this will only effect the temp correction,which will not change the overall settings...maybe we need to look further for the main setting tables and do something similar with those...worth a try i think...

Tip for the day. To increase fuel, open calibration, go to:

SHARED, TABLES, temperature compensation, torque_temp_correction

Left click top corner of the 1D table so the whole table turns black. Right click, select block offset and add whatever percentage you want to increase horsepower by. I.E 0.1 = 10% horsepower and torque increase.

Whoo Hoo, there'll be some blown apart green motors now!!!!

[ddmech]

The ir is no manual or info on the dct except for the help file that I know of.The best source of info is to read and reread the dct thread here on DK.More info on here than anywhere else that I am aware of.As far as increasinf power with dct it is more of a trial and error thing.Just go slow and make minor changes until you lear what you are doing.Also you can take another cal from a higher horsepower motor and download it.If you choose this route make 100% sure that they have same cam,injectors,ect.,or you wont get the performance you want.Hope this helps.

[harobaua]

Friend jabkissmya,

To ask for your kind cooperation to get the files DDEC IV:

06R0425676
06R0880723

Thanks,

[fram145]

Hello
DDEC V need reprogramming without egr

[ddmech]

Everyone here ois looking for it too.Good luck!

[alexcoste]

someone can get these settings
06R0172921
06R0606673
06R0473017
06RE116997
06RE116872
06RE121438
please
thanks regards

[Lickety Split]

ok,i tried to open them in ddrs too,but couldnt figure it out...i dont use ddrs very much,any help here would be great,hint hint.

If anyone could please help me open the files i have tried everything in ddrs and ddct but it always says they are not recognised...maybe i'm missing something. Thanks in advance.

[Lickety Split]

added new serial

sorry,this is the file i am trying to open...i just cannot figured out how to convert it

[amishmafia00]

ok, after 3.5 days trying to get my software working again, i've done it, i had to start with another computer, i think that something didn't uninstall completely.

my question, is there a way to use drs to read the ecm and save? if I do "update on mainframe" it says it saves information to history for later. does anyone know where this gets saved?
thanks to everyone for all the great information

[ddmech]

Ive tried that also but never could find it either.I just use dct,much simpler.

[jackalfa]

Please DK Members, your help is needed to find this calibration:
Engine Series 60
Engine Serial # 06R0554014
Engine Model 6067MK60
All help is greatly appreciated, regards

[jabkissmya]

More serials added

[launchtech]

Please DK Members
Engine Series 60
Engine Serial # 06R0777242
VIN:1FUJBBCK54LN49097
share DDEC Programming file please!
thanks regards!

[aaronmtz]

somebody helpme i need the calibration for 06r02902117

[mentos]

More serials added

File is corrupt !!!:sheep:

[ddmech]

File isnt corrupt.Ive tried it and it works fine.Thank you jabkissmya.Im getting a pretty good database of cals collected.Just a few at a time.

[aaronmtz]

somebody helpme i need the calibration for 06r02902117

[ddmech]

You have too many numbers in your ser. #.Check and verify.

[aaronmtz]

yes ddmech im sorry i verify and the correct engine serial number is 06R0290217 please help me i really need it

[aaronmtz]

please everybody helpme i really need that calibration 06R0290217

[ddmech]

Is this a gk,430hp with 5575 injectors?I wont have the exact ser# but probably have one that is same configuration.

[aaronmtz]

yes its 430hp at 1810thanks ddmech

[aaronmtz]

please somebody helpme i need the cal for 06R0290217

[makura]

Hi guys
I need cal for 06R0680960
Thanks in advance

[ddmech]

These cals are what I have collected around the web.Not my own work other than getting them all in one place.Many of these came from jabkissmya.The thanks should go to him!
There are about 140 in all so everyone enjoy.

[sova]

Hello
You can get to RapidShare?
I can not download.
Thank you very much.

[ddmech]

I dont know if I can do that but I will try sova.

[ddmech]

https://rapidshare.com/files/281167200/DDEC_Reprogramming_System.rar


Try this my friend.

[hungvi2004]

just a thought,but i just found this in another thread...but come to think of it,i think this will only effect the temp correction,which will not change the overall settings...maybe we need to look further for the main setting tables and do something similar with those...worth a try i think...

Tip for the day. To increase fuel, open calibration, go to:

SHARED, TABLES, temperature compensation, torque_temp_correction

Left click top corner of the 1D table so the whole table turns black. Right click, select block offset and add whatever percentage you want to increase horsepower by. I.E 0.1 = 10% horsepower and torque increase.

Whoo Hoo, there'll be some blown apart green motors now!!!!

dear brothers

Could you help me? i want to reduce consuming fuel but i don't known to adjust which parameters in calibration file by ddct, if you known please help me, thanks & regards

[launchtech]

Hi PRO!Help me pls!
Engine model: 6DD4408507
I need cal file!
Thank allPRO!

[launchtech]

Hi PRO!Help me please!
Engine Serial: 06R0775570
I need cal file!
Thank allPRO!

[diagnosss]

Hi guys
I need cal for
06R0720937
06R0165397
06R0761577
Thanks in advance

[ricz]

I need calibration file for 06r-0727593 thank you.

[symdecomp]

I need the engine calibrations

06r04730316067pk60
06r03049976067gk60

I hope they are urgent help
regards

[ddmech]

Friend,spamming all the dk threads wont get the cals for you.If you wil go to post 191 there is big download available.Just run the serial numbers through a parts program and find one with matching injectors and configuration.Should be one that will work.Might have to change i/o conf.Will get you going though.

[Lickety Split]

https://rapidshare.com/files/281167200/DDEC_Reprogramming_System.rar


Try this my friend.

is this link still good? just takes me to the rapidshare site,i see no link to the file...

[ddmech]

Just checked it for you.Worked for me fine.Have good one.

[gagne]

When y copy calibration and unit to c /detroit diesel / reprograming y don t see unit and calibration to unit windowfor see unit Its possible to see This When y connect to Ecm thanks for help

[gagne]

y try to copy This in two pc and y never see calibration and unit help please

[gagne]

y have and ecm with memory erase its possible to reflash this with new flash thanks

[ddmech]

Yes,drs will program a blank ecm.Before you copy files into drs,you must first have it running in desktop.If you shut down drs,you will have to reload your cals and start over.Good luck!

[gagne]

ddmech do you have process for Programs blank Ecm thanks

[gagne]

Any body have calibration for dd15 or Mbe thanks

[ddmech]

run drs,load your cals in c/dertroit deisel/detroit reprogramming.Go to program ecm ,pick cal use,download.Just follow instruction on screen.
Good luck.

[gagne]

its possible to change version of calibration in the Ecm

[ddmech]

No,you have to convert the cal you want to use to the version in the ecm.

[gagne]

its impossible to blank Ecm and reflash With and other version

[ddmech]

Yes,with DRS.Just download the cal you want.

[gagne]

i have Ecm With version 32.8 and y try to flash 5.30 its possible

[ddmech]

Are they both ddec III/IV?

[gagne]

the version ddec3 for 5.30 and 32.8 ddec 4

[ddmech]

Use dct to convert the5 to a version 32.Then just download buddy.Have did many like this.No problems.

[jackalfa]

Please, I hope someone can help me with this process.
I'm helping a mechanic friend to change or convert the ECM from DDEC II to DDEC IV. The engine is a 6067GU60 350HP 1350lb-ft (06R0059474), he would like to upgrade the engine or calibrate the ECM to at least 1650lb-ft too.
I would like to know which calibration I need to this engine model in DDECIV ECM?
My understanding is that I need to calibrate the "new" ECM DDEC IV with DDRS but I dont know which calibration I need to use to this engine model with an original DDEC II calibration to making it work with a DDEC IV ECM.
Please if some can guide me how to do this it would be greatly appreciated.
Thanks in advance.

[gagne]

m'y dct is lock When y change version m'y tool its not full unlock do you have and idea for unlock m'y tool

[ddmech]

If you use the crack listed on the dct thread it should be completely unlocked.Dont think there is level of user on dct.

[jackalfa]

hi ddmech,
Have you done a conversion from DDEC II to DDEC IV?
Please can you guide which calibration I need that can match the engine rating?
I would like to know which calibration I need to this engine model in DDECIV ECM?
The engine is a 6067GU60 350HP 1350lb-ft (06R0059474).
Thanks in advance.

[ddmech]

No I havent.What reason do you have for wanting to change?If horsepower gains is all you are looking for camshaft advance and dct will do this.Is this a 11.1?Does this engine have top cooled liners?If it doesnt this engine wont standvery high horsepower very good.

[peter21]

hi ddmech,
Have you done a conversion from DDEC II to DDEC IV?
Please can you guide which calibration I need that can match the engine rating?
I would like to know which calibration I need to this engine model in DDECIV ECM?
The engine is a 6067GU60 350HP 1350lb-ft (06R0059474).
Thanks in advance.

go here buddy..... http://www.digital-kaos.co.uk/forums/f166/detroit-calibration-tool-112226/index48.html#post1262981

[p455w0rd]

Thanks lets try if it work

[Vitamin]

Hi people! Now need to reflash two modules ESN 06R1006105 and 06R1017695 ... Can somebody help with the calibration files?

[ddmech]

What software are you using to reflash with friend?I have dddl reprogramming station but dont have any cals.

[gagne]

After install dct ans replace wct.dll y cant change number of version calibration and y cant create calibration help ddmech thanks

[gagne]

Any buddy CAN explane to me How y CAN change Ecm With version 32.8 to a version 05 d thanks

[ddmech]

Click on comms and you will get a drop down list.Near bottom click convert.It will ask which version to convert to.Choose rel5d.Click save.It will convert the cal for you now.You should have another cal on left side now that something like rel5d.Download this and you should be good to go,I dont know if you can convert from32 to 5 but worth the try.Big difference in memory.I have changed 32 to 9 so maby it will work.Good luck friend!

[gagne]

do you have demo picture of this process thanks

[Vitamin]

Will use DDRS 7 if find the calibrations

[ddmech]

You and me both freind,LOL!

[ddmech]

To GAGNE

Sorry friend I dont know how to make the snapshots.When I slow up a little I will try to figure it out and send them to you if I can.

[amishmafia00]

ddmech
to screen cap, press the "print screen" button on your keyboard, on my laptop it shares the f11 button, on my desktop it's above the number pad. this will copy the current screen to your clipboard. paste it into a graphics program and save. to capture the currently selected window only press alt+printscreen

[amishmafia00]

look at the calibration for esn 06r0039879the description for this is for converting ddec 2 to ddec III. i got this calibration from this thread you could open the files in drs, and then generate calibrations automaticly which will make the serial number of the engine the name of the calibration, then go into dct, click on open calibration, in the open calibration window there is a comment line, one of them says ddecII to ddec III.


if you don't do this you will have to make sure that you change your trs pulses per revolution to 6 rather than 36. i've never done this but i know it can be done

you might not be able to just put a 1650 program in. had a friend who's ecm was blanked by another guy. he put his brothers 500 hp ecm on his 430 and the thing barely ran. higher hp engines use bigger injectors so the pulse widths are generally narrower. put this program on an engine with small injectors and you have less power than before





hi ddmech,
Have you done a conversion from DDEC II to DDEC IV?
Please can you guide which calibration I need that can match the engine rating?
I would like to know which calibration I need to this engine model in DDECIV ECM?
The engine is a 6067GU60 350HP 1350lb-ft (06R0059474).
Thanks in advance.

[Thecell]

Friend jabkissmya,

To ask for your kind help to get the files DDEC IV:

06RE124260
06RE124277
06RE124232
06R0160872
06RE001914

Thanks,

[jackalfa]

Please jabkissmya,
I need your help with this calibrations:

06R0945334
06R0410500
06R0488821

Thanks in advance and best regards.

[Thecell]

look at the calibration for esn 06r0039879the description for this is for converting ddec 2 to ddec III. i got this calibration from this thread you could open the files in drs, and then generate calibrations automaticly which will make the serial number of the engine the name of the calibration, then go into dct, click on open calibration, in the open calibration window there is a comment line, one of them says ddecII to ddec III.


if you don't do this you will have to make sure that you change your trs pulses per revolution to 6 rather than 36. i've never done this but i know it can be done

you might not be able to just put a 1650 program in. had a friend who's ecm was blanked by another guy. he put his brothers 500 hp ecm on his 430 and the thing barely ran. higher hp engines use bigger injectors so the pulse widths are generally narrower. put this program on an engine with small injectors and you have less power than before


amishmafia00,

You obviously sound like you have done this several times...
What would you recommend as the best way to defuel a series 60 DDECIV, 12.7 L, pulse width or fueling table. We are looking to cut back on the fuel by about 10%. Would it be best to adjust the whole fuel table by "MULT x .90"? Or adjusting the pulse width to a smaller number.

We currently do this with the Cummins ISX series very successfully, but the DDECIV is a new one for us.

Your help is greatly appreciated.

TC

[jabkissmya]

reported errors on latest files downloaded.
whoever requested units 06R1006105 and 06R1017695, they do not exist in server.

unit 06R0160872 reported some kind of bit error

but here is the latest files

[amishmafia00]

06R1??? never saw that all i've seen is 06r0 what is 06R1? I will have to try putting these in the parts program. Maybe these are euro calibrations?

[jabkissmya]

06R1??? never saw that all i've seen is 06r0 what is 06R1? I will have to try putting these in the parts program

the only 06R1 i know of is 06R1999999 test cal for ddec 5

[ddmech]

Jabkissmya,in the files you uploaded there are software and map files in adition to the cals and units.Out of curiosity what are these for?Thanks.

[jabkissmya]

Jabkissmya,in the files you uploaded there are software and map files in adition to the cals and units.Out of curiosity what are these for?Thanks.
it goes with them, when you download it brings them all down.

[ddmech]

Thanks,I was just curious.I thought it just used the cals and units.

[amishmafia00]

The requester of the 06r1 cals list his location as europe, that's why i thought maybe these are euro cals. Maybe the cals are on a different database

[Thecell]

06R1??? never saw that all i've seen is 06r0 what is 06R1? I will have to try putting these in the parts program. Maybe these are euro calibrations?

Do you have the cal for

06RE0124260.

Thanks.

[jabkissmya]

The requester of the 06r1 cals list his location as europe, that's why i thought maybe these are euro cals. Maybe the cals are on a different database

i thinking maybe ddec 6 or ddec 10 cal.

[amishmafia00]

i thinking maybe ddec 6 or ddec 10 cal.

that is possible, i didn't think of that

[ddmech]

That is a detroit reman ser num.What is the model on the valvecover tag?You should be able to match a cal with it.

[Thecell]

That is a detroit reman ser num.What is the model on the valvecover tag?You should be able to match a cal with it.

The reman is 06RE..... as all of the engines we are working on, aprox 820 are like that. They are remanufactured engines with DDEC IV upgrades and placed into Brand new frames. It allows the customer to legally run the EPA non-current-engine. The problem we see is the reman engines are not all consistent in their performance or durability.

Thanks all for the fantastic input into training this "slow learner" here. The combination of DDRS, DDCT, Diagnostic Link, showed us that DD still has a chance...:D

Bob

[ddmech]

The variation in power and performance has to do with variable cam timing due to cheap made inconsistant gear train.Air to air leaks,overhead not right,(and no I didnt say in detroit specs),lo nox cals ect. contributes to this.When you get everything right they are pretty consistant.You have to spend alot of time and effort to do this.Most mechanics wont go to this kind of effort.That is what we get paid to do every day.When I was hourly mechanic I wouldnt spend this kind of time either.Very time consuming and tedious to get everything(and I do mean everything)right.

[Thecell]

Does anyone know what the digital Input voltages are...we are guessing 12 volt on a 12 volt truck due to the switches on the cruise control etc. If we used one of the input to switch to an "alternate HP calibration", i.e. #1 or #2, are there any other ramifications we need to look at?

Thanks in advance.