OBD Mikronas codecard.lt

[doxa]

Does anyone know about this tool?Tnx

[cokolo]

My friend has it and is extra .
Is completely satisfied :wavey:

[doxa]

My friend has it and is extra .
Is completely satisfied :wavey:
Your friend has experience with Carprog/OBD Mikronas/that a safe-100%?Thanks for the info, I'd buy this tool.Best Regards

[almeida]

i just ask for that feed back a few weeks ago but no one confirm that.
i know carprog is good to read eprons, but the rest i?m not so sure......
i?m interesting to buy that too, but.......

[exe123]

working fine. two friends of mine are using it. no problems yet. some sw versions are not supported but k+can has same problems. it takes a while until they can do all versions.

[ATHANASSIOS]

Yes mate, it is a very good & dependable tool, with a super tech support. A little expensive , but if u buy a whole package, it comes much cheaper.

[T72]

Carprog cover more SW than Enigma do by OBD!

[ipejasinovic]

Yes mate, it is a very good & dependable tool, with a super tech support. A little expensive , but if u buy a whole package, it comes much cheaper.
Also, there is "clone" solution which is even cheaper. It's original device, but with all softwares and adapters unlocked...

[z786]

Also, there is "clone" solution which is even cheaper. It's original device, but with all softwares and adapters unlocked...

please do go on, very interested :)

[pepi]

Also, there is "clone" solution which is even cheaper. It's original device, but with all softwares and adapters unlocked...

Are you sure about that ? Where can I update my carprog except from codecard?

[T72]

Also, there is "clone" solution which is even cheaper. It's original device, but with all softwares and adapters unlocked...
bla bla bla :congrats:

[ipejasinovic]

^ Aahahahahahahaa etc...

P.S. Who are You? Author of Carprog? You look so confident, even Bill Gates would be shamed...

[doxa]

Also, there is "clone" solution which is even cheaper. It's original device, but with all softwares and adapters unlocked...

Brate ovo treba da radi mikronas 100% preko OBD a,
ti si na forumima,i OK lik.Pusti ove majmune.Pozzzz

[PremierD]

Brate ovo treba da radi mikronas 100% preko OBD a,
ti si na forumima,i OK lik.Pusti ove majmune.Pozzzz

English speaking forum for a reason mate ......

[alimmo]

Also, there is "clone" solution which is even cheaper. It's original device, but with all softwares and adapters unlocked...


????????????????????????????????????????????

[T72]

^ Aahahahahahahaa etc...

P.S. Who are You? Author of Carprog? You look so confident, even Bill Gates would be shamed...
I am not an author of carprog, but I have it....
codecard.lt there are in my town, so I know authors, and know that there is no clone of Carprog!
regards

[ipejasinovic]

No, you're right. It's all fake. Sorry...

[almeida]

for what i see,
the posts say a friend of mine have and work good !?!?!?!?
no one say i have that and work good......
and when they say some sw not cover it means not cover anything......
for me i think car prog not work on that, but i know is a great tool like programmer....

[exe123]

for what i see,
the posts say a friend of mine have and work good !?!?!?!?
no one say i have that and work good......
and when they say some sw not cover it means not cover anything......
for me i think car prog not work on that, but i know is a great tool like programmer....

My friend has this tool and I used it already. On some cars it isn't working but these even digiprog couldn't do.
Carprog, Digiprog, Elprosys etc. all use firmware patching.
So they need to have all firmware versions until they can support every dash.

Codecard is a good modular tool. everything is working fine. my partner is using it with micronas, airbag vw and most of the opel stuff. perfectly working and good support.

[almeida]

:congrats:
now i like the post.
thanks

[peter11]

Hi all
i have it ano no problem with this....nice and simple .
good choice and not expensive.....

[doxa]

[QUOTE=doxa;852404]Your friend has experience with Carprog/OBD Mikronas/that a safe-100%?Thanks for the info, I'd buy this tool.Best Regards[/QUOTE
Regards to all, the discussion was very good, and because all participants Best Regards

[ertunga]

:sheep: 2007 2008 obd jetta problem error bad contac

[ertunga]

2007 2008 obd jeta eror program bad

[mario313]

Octavia II 2007 - error, Passat 2007 - error :rolleyes:

[m_yura]

Golf V visteon 2007 error

[almeida]

hello,
we could make a conclusion, that are more erros than a good jobs.
code car have a option to the fords by obd, us far us i know it happens the same, a lot of errors and most of the times not work.
now they have a option to do the volvos by obd, i think i just know the feedback...........
i bought the datasmart3 and i?m very happy with that.
never fail.
cheers

[exe123]

as I said before. got the message also on digiprog and other devices. unsupported version, etc...

you also have to remember that it will never work on second hand dash. you need to have a valid key

[T72]

hello,
we could make a conclusion, that are more erros than a good jobs.
code car have a option to the fords by obd, us far us i know it happens the same, a lot of errors and most of the times not work.
now they have a option to do the volvos by obd, i think i just know the feedback...........
i bought the datasmart3 and i?m very happy with that.
never fail.
cheers
my minds not like yours...

datasmart do not use at all, but carprog every day like eeprom programmer, programmer for srs units, opel ecu....
VAGs and fords I do with dp3, but volvo soft works really, and old S80 with 908(shit) verry good to make by OBD :hello:...
Sometimes stucking dashes with 912(2000-2002) but can disconect a batery and all ok..... volvo soft is unique right now, other tools do not have this soft at all

[m_yura]

This device works correctly at Caddy VDO - 24c32 2007 year of manufacturing, I checked it over and over again

[T72]

Golf V visteon 2007 error
visteon do not have micronas, this soft is for VDO dash!

[EMCE159]

Hello
I have also carprog. Use it mainly for pin reading for immo issues. Reads good pin from opel. Possible to find all 7 bytes in micronas if you know what i mean. Besides very good for eprom reading.

[darius89]

Have errors like every tool....
But works really great,
50% $$$$ for me makes carprog :)

[Youneselm]

please i one a genuine carprog of Codecardt for more than 2.5 years.
And its a peace off shit!!!!
Even ass a porgrammer it dont do it write and no good!!!
Example: Select a 95p08 and try to write another file on it.
veryfi and you have errors.

[luis12]

There are a lot of dashes that can be made with a pair of good programmers, two dash calculators like Tachosoft or Nio and love for the work, more interesting do it by hand...