help find key renault clio 2002 safir2

[gadroulll]

i have read with diagnostic x431 renault immmobilizer

computer type:BMT N3
SOFTWARE NUMBER 0035
CALIBRATION NUMBER 0041
MPR reference 7700429665
key= 0,00,00,00,35,00,00,03,f5

i have zed bull original
what key to write T5 OR I..D 46 ,?
what data to write to key?
xx,xx,xx,xx,xx,xx,xx......................

any help?

[gadroulll]

I program a key with zed bull i put code 35 00 00 03 f5 with chip id 33 , t5 and the does not work any suggestion

[obdmaster]

Remove BCU white unit under glove box, read 93c46, read chip input dump into zed bull, make transponder on t5 you can use the one that didnt work, hey presto you have a transponder to start car.


Done exact same job myself very easy ,take it easy with the hot air on pcb on these sagem units as pcb,s are made of poor stuff.


Another option decode ecu using renault decoding tool takes 4 hours cut immo wire before fitting ecu, and car has no immo and runs once more.

[gadroulll]

the next method tha i will follow is to read uch box memory 93c46 . i believe that it will work
\
method to desolder and reset memory on silicon safir 2 its very tiring for me ,

but does anyone know ,because x431 gives me wrong key in diagnose of uch?

[martink]

hi, 2002 clio should have id46 key.